Topic: Megaminer 6.3 - Multi pool / Multi Algo launcher - page 15. (Read 70970 times)

Check the release notes for his explanation.

Why Removed delay close miner option ??
I was very happy with this option.
I even set this to 40 sec, to insure no downtime on switching.
And it's work very well!

There is an error in N-CcminerTpruvot.json

It is unnecessary, you can put two periods with different prices,

I will change electricity cost to local currency, I did not thought btc price fluctuation

agree on that

btc price can fluctuate 10-20% in a week, so better set the prices in local currency

Calculate the average hourly cost yourself.
(daily * 16 + nightly * 8 ) / 24 = average power per hour

Is this the correct place? I'll change it to divide by 10000, so it should always be less than other pool...

testing on AMD , there is some issues with Nanopool (when running dual Claymore ETH/DCR) , miner itself working ok , but getting spammed with errors like this:


01/16/2018 15:17:36...... ###### ERROR ##### Cannot index into a null array. at , C:\Megaminer-5.2\pools\NANOPOOL.ps1: line 50
at , C:\Megaminer-5.2\Include.ps1: line 1014
at Get_Pools, C:\Megaminer-5.2\Include.ps1: line 1007
at , C:\Megaminer-5.2\core.ps1: line 977
at , C:\Megaminer-5.2\core.ps1: line 968
at , : line 1

@@electricitycost

I like this feature, but calculating in BTC is tricky because of the btc fluctuating price, best is to set fixed euro/dollar prices..

For example the kwh price here for me is between 7-23 o clock = 0,13884 euro and 23-7 oclock = 0,12674 euro.

The wattages are available in the program, so maybe calculate at that way ?

5.2 Release

*More acurated benchmark system, now benchmarks are also updated while mining
*Power cost now affects profit (real for NVIDIA, estimated model based for AMD)
*Added Power, revenues, efficiency and pool detected hashrate, to active miners section, note: this speed is usually based on las 5 minutes shares and is pools refresh speed dependant.
*Redesigned and more informatives log files
*Added screen info while interval is starting
*Added power limit percent and Gpu Group in current screen
*New stats screen (old screens are reorganize)
*Changed default miner intensities and config options to ensure default options stability
*Removed delay close miner option from code due to unstable executions
*Moved Mkxminer and excavator to Additional Miners folder (you must add manually to miner folder if you want to try)
*Updated ccminer tpruvot to 2.2.4
*Updated bminer to 5.1.0
*Updated Claymore Dual to 10.4
*Updated Nsgminer to 0.9.4
*Updated ccminer klaust to 8.18
*Updated cpu miner xmrig to 2.4.4
*Updated cpu miner jaydee to 3.7.9
*New sgminer phi fork
*Added Altminer Pool

*Fixed: some wallets from sprnova and mining pool hub not shown on wallets screen
*Fixed: Nicehash wrong fee when using nicehash specific wallet
*Fixed: donation time not used for donation if next interval is for benchmark

NOTE: YOU MUST ADD THIS VARIABLE TO CONFIG.TXT OR CONFIGURE FROM NEW RELEASE WHERE IT IS INCLUDED : @@electricitycost
NOTE: STATS FILE ARE NOT COMPATIBLE WITH PREVIOUS RELEASES, YOU MUST BENCHMARK AGAIN

At this moment divide the profits is good solution.

I would like to use ZPool as a backup pool only when the main pool is offline. I guess the easiest way to implement would be to divide all the profits by 10, so the main pool would always appear more profitable.

Any drawback to that solution by just adding a zero to the end of the divisor? Only one I can think of right now is forgetting about it when updating the scripts -- so a custom multiplier per pool in the config would be nice...

?....Default location in config.txt is Europe

I've enabled CPU mining, but it's not pulling a btc rate for yescrypt from ahashpools API. I've managed to get a price rate by doing this. I tried swapping the ahashpool.ps1 file in the pools directory out for ahashpool.ps1 from the one in sniffdogminers pool directory. That results in a price rate for yescrypt, but in doing so it messes up all the other algorithms. How do I fix this using the supplied ahashpool.ps1 from latest release.

EDIT: i got it figured out.

add "yescrypt"{$Divisor /= 1000} to include.ps1 along with the others in function Get_Algo_Divisor

some miners/algos take a long time to ramp up hashing to full speed. depending on which algos you're hashing it might take longer than the 200 seconds to perform fully.

Hi, tutulfo.
You are saying: "Profit recheck interval time (in seconds - less than 600 not recommended)".

What disadvantages can we have if set some small period like 200 sec ?

Eth donation sent on the 8th. Thanks for your efforts.

Thanks for the awesome tool. I like the fact, that I can easily separate my gpus and a profit switching threshold. The feature i would like to see though, is to be able to set up username and password for each pool, that way I can change difficulty and choose payout currency I want. For instance I would like to set my HR and zpool payout in altcoin, and FYI ahashpool do payouts only in btc, and for pools like MPH - separate workers.

nvm, figured it out.

I tried to add 960 to 1080ti rig. Made another gpu group, started .bat, but 960-group was stuck constantly failing to start xevan mining. Can I specify different algorithms to different gpu groups? Like, "all algo" to 1080ti_group and "some_algos" to 960_group. Maybe making my own mining type (like nvidia, amd and cpu) will do?