Topic: Megaminer 6.3 - Multi pool / Multi Algo launcher - page 26. (Read 70970 times)

Added Signature, CastXMR I think is only designed for vega cards

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Cast XMR 0.7.0 CryptoNight mining optimized for AMD Radeon Vega GPUs

  Coded by [glph3k] for more info visit http://www.gandalph3000.com
  Donating 1.5% mining power to developer. Thanks.

  For current stats press 's'
  For seamless exit press 'q'

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

[15:01:39] Initializing GPU, loading kernel ...
Blockchain Compute Driver detected.
GPU0: Ellesmere | 32 Compute Units
[15:01:40] Connecting to etn-stratum.suprnova.cc:8875 ...
[15:01:40] Connected to pool.
[15:01:41] New job received.
[15:01:41] Difficulty changed. Now: 100001.
[15:01:46] GPU0 | 58°C | Fan 2890 RPM | 767.8 H/s
[15:01:52] GPU0 | 59°C | Fan 2876 RPM | 631.7 H/s
[15:01:57] GPU0 | 60°C | Fan 2881 RPM | 694.6 H/s
[15:02:01] New job received. Avg Job Time: 20.0 sec
[15:02:01] Difficulty changed. Now: 75000.
[15:02:03] New job received. Avg Job Time: 11.0 sec
[15:02:03] GPU0 | 60°C | Fan 2877 RPM | 683.9 H/s
[15:02:08] GPU0 | 60°C | Fan 2882 RPM | 696.7 H/s

Just tried beta 4 and I could not get it to run without adding a group.

It would come up as no miners.

Having an issue with difficulty. Very very very high starting value, doesnt come down and I tried adding a "-p d=0.05"  in the extra para section but it does not appear to be taking. I'd rather not take out the -p #PASSWORD# from the main command line because multiple pools and algos are used with this one line

testing AMD, i noticed that hash rate decrease.
i use claymore with a RX480 and it gives 29 mh/s
with megaminer, automatically it uses gatelessgate and it gives just 25 mh/s
is there a way to setup megaminer to use claymore 10.2

great job with nvidia, sometimes zm.exe crashes, so i have to close it and reopen it. using rig with 8 gtx1060

keep up with this, great job

Loving the progress, Just want to say keep up the great work. Can you add donation addresses to your Signature as I don't set the miners to donate and prefer to do it manually once a month or so.

Question can we get castxmr enabled for rx series cards as I get 3.2KH using it and only 2.2KH using claymore.

Having an issue with difficulty. Very very very high starting value, doesnt come down and I tried adding a "-p d=0.05"  in the extra para section but it does not appear to be taking. I'd rather not take out the -p #PASSWORD# from the main command line because multiple pools and algos are used with this one line

https://i.imgur.com/tjKayJS.png

Different coins, Like on zpool I use LTC as my payout coin, on Ahashpool I use BTC, On Hash Refinery I use AltCom.

I have modified the pools config file to make it work for now but would be nice to set say
if
@@CURRENCYAHash=BTC
use $CurrencyAhash
else use
$CURRENCY
or something like that

I´m proud to present my new adquisition (Xfx 4gb), I hope this helps to test software and solve issues easier for me.  I never had amd card before and It´s funny for me open this world.

As I say sometimes, I´m doing this program for me, as a hobby on my free time, and to return comunity some for free mining software I get past months, but still I want to thank donators for help to mitigate profit lost for time my rigs are stopped testing or failed with new alpha releases.

Differents coins or diferent adresses of same coin?

Hey Tutulino,

latest beta release as of right now is defaulting to ahash pool no matter what pool is selected.

tried on 99 all pools but again it just shows profits screen for ahash and the miner is connecting to ahash too.

it was working fine up to the last commit yesterday.

so one of the commits today has chopped the other pools checking out.

Ill keep you posted if i find out where.

thanks again for the support.

this megaminer sure is getting better by the days.

Nevermind think you just fixed it with that commit you posted as i typed.

yep that sorted it.

Another small issue is :

on the dual mining getting :

NVIDIA Cards available: 1
CUDA Driver Version/Runtime Version: 9.1/8.0
GPU #0: GeForce GTX 1070, 8192 MB available, 15 compute units, capability: 6.1

Total cards: 1
DUAL MINING MODE ENABLED: ETHEREUM+LBRY
ETH: Stratum - connecting to 'europe.ethash-hub.miningpoolhub.com' <139.162.131.165> port 20535
ETH: eth-proxy stratum mode
 LBC: Stratum - connecting to 'lbry.suprnova.cc' <193.70.45.182> port 6256
"-allpools" option is set, default pools can be used for devfee, check "Readme" file for details.
Watchdog enabled
 LBC: Stratum - Connected (lbry.suprnova.cc:6256)
Remote management is enabled on port 2850
ETH: Stratum - Connected (europe.ethash-hub.miningpoolhub.com:20535)

 LBC: Authorized
Received unknown response: {"id":null,"method":"mining.notify","params":["4256","0x0104c5a89bebf0d9f172e73d272363d7677670ccfe95a1c101b43d69180d8ad3","0xc5f7a893e7fb670ce12bfe6ae0892bea15e5a43f1f03f29a788c31b49f76bd53","0x00000000ffb34c02420e9948eacd78cf33b059a88ade1ff0614f7f3c303cf3a7",true]}
Received unknown response: {"id":null,"method":"mining.notify","params":["4257","0x5d337919844d046c5126aa9f5b7de06bc00dac7e7f7d84bc8208c87149954683","0xc5f7a893e7fb670ce12bfe6ae0892bea15e5a43f1f03f29a788c31b49f76bd53","0x00000000ffb34c02420e9948eacd78cf33b059a88ade1ff0614f7f3c303cf3a7",true]}
GPU0 t=41C fan=33%
 LBC: 12/12/17-18:31:42 - New job from lbry.suprnova.cc:6256

and repeats through this error.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

temporary solution for others getting this problem just cut the virtual pool out of its folder and paste it in a different folder for now.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Nanopool on initial load up of all pools i get this error too doesnt effect anything mining wise. think its just looking for other coins that it doesnt support.

Add-Member : Cannot add a member with the name "Name" because a member with that name already exists. To overwrite the
member anyway, add the Force parameter to your command.
At C:\Users\Fred\Desktop\miners\megaminer master 12.12.17 18.11\Megaminer-master\Include.ps1:483 char:95
+ ... ent -ne $null) {$_.Content | Add-Member @{Name = $_.Name} -PassThru}}
+                                  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : InvalidOperation: (@{Algorithm=CRY... Name=NANOPOOL}:PSObject) [Add-Member], InvalidOper
   ationException
    + FullyQualifiedErrorId : MemberAlreadyExists,Microsoft.PowerShell.Commands.AddMemberCommand

I've found the script hung a couple of times. I only found out when another script I have that monitors temps alerted me to low temps on the rig. I've got large pages enabled, 8GB ram, and 120GB SSD. I'm willing to help diagnose if there's a way to troubleshoot this. I'll save the log when it happens again.

How do I set a different payout coin for different pools? Like Ahashpool,zpool,ETC as i would like to set different payout coins for each.