Megaminer 6.3 - Multi pool / Multi Algo launcher - page 56.

tutulfo

full member

Activity: 322

Merit: 105

Quote from: MikeBuzz on August 05, 2017, 12:33:52 PM

My idea was to mine those coins direct to bittrex wallets, then look at auto trading based on price increase, I think it would be better to control when coins are exchanged than have them auto convert, at the moment I am using nemosminer with only 4 possible coins being mined that I think will go up in price over the longer term and mining using MHP only it would be nice to add some extra pools the don't auto exchange

Ah, ok, I will try it.

MikeBuzz

member

Activity: 68

Merit: 10

My idea was to mine those coins direct to bittrex wallets, then look at auto trading based on price increase, I think it would be better to control when coins are exchanged than have them auto convert, at the moment I am using nemosminer with only 4 possible coins being mined that I think will go up in price over the longer term and mining using MHP only it would be nice to add some extra pools the don't auto exchange

tutulfo

full member

Activity: 322

Merit: 105

Quote from: MikeBuzz on August 05, 2017, 11:54:07 AM

Quote from: tutulfo on August 05, 2017, 09:42:39 AM

Version 1.7

*Added spreadminer for spreadcoin
*Upgrade screen instructions of use for each pool
*Added to Suprnova: SPREADCOIN (SPR)
*Added Yiimp pool (requires individual wallet for each coin in config.txt): DENARIUS (DNR), DECRED (DCR), SIGNATUM (SIGT), BITCORE (BTX), VERGE (VRG), SIBCOIN (SIB), VERTCOIN(VRC)
*Software donwload for first execution is now independent of selected pool

THIS VERSION REQUIRES NEW CONFIG.TXT FILE, YOU MUST DOWNLOAD AND CONFIGURE AGAIN!!!

Could yiimp pool be added as an option for auto mining based on profit much like MPH and Zpool? but of course mining to each coins own wallet?

Automatic pools are controled by Aaronsace core, I think is possible core modifications to do what you want but do this separate this software from core future developments, I´ll try it.

I think this idea only makes sense if you exchange coins in short time (hours), profit is high based on exchage rate at moment you are mining. Anyway Yiimp requires a wallet for each coin, cannot acumulate coins on pool like Suprnova.

tutulfo

full member

Activity: 322

Merit: 105

Quote from: papampi on August 05, 2017, 10:53:28 AM

Thanks for fast updates
How do I set 2 pools ?
for example zpool+ mph ?

Not posible yet, noted in to do list.

MikeBuzz

member

Activity: 68

Merit: 10

Quote from: tutulfo on August 05, 2017, 09:42:39 AM

Version 1.7

*Added spreadminer for spreadcoin
*Upgrade screen instructions of use for each pool
*Added to Suprnova: SPREADCOIN (SPR)
*Added Yiimp pool (requires individual wallet for each coin in config.txt): DENARIUS (DNR), DECRED (DCR), SIGNATUM (SIGT), BITCORE (BTX), VERGE (VRG), SIBCOIN (SIB), VERTCOIN(VRC)
*Software donwload for first execution is now independent of selected pool

THIS VERSION REQUIRES NEW CONFIG.TXT FILE, YOU MUST DOWNLOAD AND CONFIGURE AGAIN!!!

Could yiimp pool be added as an option for auto mining based on profit much like MPH and Zpool? but of course mining to each coins own wallet?

papampi

full member

Activity: 686

Merit: 140

Linux FOREVER! Resistance is futile!!!

Thanks for fast updates
How do I set 2 pools ?
for example zpool+ mph ?

tutulfo

full member

Activity: 322

Merit: 105

Version 1.7

*Added spreadminer for spreadcoin
*Upgrade screen instructions of use for each pool
*Added to Suprnova: SPREADCOIN (SPR)
*Added Yiimp pool (requires individual wallet for each coin in config.txt): DENARIUS (DNR), DECRED (DCR), SIGNATUM (SIGT), BITCORE (BTX), VERGE (VRG), SIBCOIN (SIB), VERTCOIN(VRC)
*Software donwload for first execution is now independent of selected pool

THIS VERSION REQUIRES NEW CONFIG.TXT FILE, YOU MUST DOWNLOAD AND CONFIGURE AGAIN!!!

tutulfo

full member

Activity: 322

Merit: 105

Quote from: papampi on August 04, 2017, 05:27:48 PM

I just noticed some start batch files has wrong pool name which cause the no pool at start
hash_refinery instead of hash
mining_pool_hub instead of mph

got a question..
doesnt the switcher should update hash rate after each cycle ?
I believe its not updating the speed and keep the first benchmark.

Also is it a bug in klaust ccminer that it wont retry if connrction fails ?
it stays in retry till the switch period comes up

Code:

[2017-08-05 02:57:30] Starting Stratum on stratum+tcp://hub.miningpoolhub.com:17005
[2017-08-05 02:57:30] NVML GPU monitoring enabled.
[2017-08-05 02:57:30] 6 miner threads started, using 'myr-gr' algorithm.
[2017-08-05 02:57:47] stratum_recv_line failed
[2017-08-05 02:57:47] ...retry after 15 seconds

it would be nice to have an option to switch to next if hash rate or profit drop below a given % of benchmarked criteria after a given period.

Sorry, some changes for 1.6 went too early to github

Hasrate is always from test, not update from runtime, this has advantages and disadvantages.

Klaust fail is being commented on KlaustT github.

tutulfo

full member

Activity: 322

Merit: 105

Version 1.6
*Fixed Interval from config.txt has no effect on runtime.
*Changed core from Batch to Powershell (open new posibilities)
*Now you can add coins, pools and algo editing json files
*Unified all start batches without lost no user action boot (see examples.bat)
*Added to spnova: Bitcore(BTX)
*Added basic info from Whattomine, Bittrex and Cryptopia as help for manual coin selection on Suprnova.
*Changed from ccminerskunk to ccminerAlexis for skein algo. Ccminerskunk not working.

papampi

full member

Activity: 686

Merit: 140

Linux FOREVER! Resistance is futile!!!

I just noticed some start batch files has wrong pool name which cause the no pool at start
hash_refinery instead of hash
mining_pool_hub instead of mph

got a question..
doesnt the switcher should update hash rate after each cycle ?
I believe its not updating the speed and keep the first benchmark.

Also is it a bug in klaust ccminer that it wont retry if connrction fails ?
it stays in retry till the switch period comes up

Code:

[2017-08-05 02:57:30] Starting Stratum on stratum+tcp://hub.miningpoolhub.com:17005
[2017-08-05 02:57:30] NVML GPU monitoring enabled.
[2017-08-05 02:57:30] 6 miner threads started, using 'myr-gr' algorithm.
[2017-08-05 02:57:47] stratum_recv_line failed
[2017-08-05 02:57:47] ...retry after 15 seconds

it would be nice to have an option to switch to next if hash rate or profit drop below a given % of benchmarked criteria after a given period.

katejcejs

newbie

Activity: 12

Merit: 0

ooo sorry

to bad, will try to figure it out myself

1. Miner does benchmark for your gpu on pool you choose and checks that every 10min or so
2. Picks 5 most profitable coins for your gpu and then mines them. ( each coin 5-10-15min )
3. They stay in the pools wallet for holding.
4. Sit back and enjoy Wink

Any advice would be appreciated!

peace

tutulfo

full member

Activity: 322

Merit: 105

Quote from: katejcejs on August 04, 2017, 09:29:43 AM

Hi guys

Was talking earlier with #tutulfo about setting Megaminer for Suprnova, so the miner mines the most profitable coin for your Nvidia card and just stores mined coins on the pool, for you to withdraw when you want. So NO auto exchange.

Hopefully it will be ready soon

Keep up the good work #tutulfo

Sorry, You misunderstood me, there are 3 options:

*Automatic selection of coin based on profit at that moment, it only has sense if you autoexchange to destination coin, profit is highly based on instant exchange rate. You can get this selecting MPH, Zpool or HR.
*Automatic selection of coin based on profit at that moment, but no exchange to destination coin, for me only has sense if you manual exchange short time after (24h or less). You can get this on MPH setting "No Autoexchange" on pool´s web
*Manual selection of coin, based on your criterion, usually for hold coin (on pool, wallet or exchange). You can get this on Suprnova or BlocksFactory

No roadmap to autoexchange based on instant profit for manual pools like BF or SPNV. This software born to unify mining on different kind of pools, roadmap is only add new coins and new pools and add some info to some screens, keeping Aaronsace MPM core almost intact as posible.

katejcejs

newbie

Activity: 12

Merit: 0

Hi guys

Was talking earlier with #tutulfo about setting Megaminer for Suprnova, so the miner mines the most profitable coin for your Nvidia card and just stores mined coins on the pool, for you to withdraw when you want. So NO auto exchange.

Hopefully it will be ready soon

Keep up the good work #tutulfo

tutulfo

full member

Activity: 322

Merit: 105

Quote from: papampi on August 03, 2017, 09:43:39 AM

Thanks a lot
And hopefully last question for now ...
How much switch time do you think is good for triple pool mine ?
I set it to 10 min, is it good, or should go to 5 or 15 or 30 .. ?

I´m very disappointed with autochange pools, but is only an opinion, profit is far below estimate (more often on zpool for me). I actually mining on Suprnova and using Cryptopia to exchange.

100 seconds for test is enough, for real runtime less than 500-1000 I think is no sense, too many coin change and time lost on each change.

papampi

full member

Activity: 686

Merit: 140

Linux FOREVER! Resistance is futile!!!

Thanks a lot
And hopefully last question for now ...
How much switch time do you think is good for triple pool mine ?
I set it to 10 min, is it good, or should go to 5 or 15 or 30 .. ?

tutulfo

full member

Activity: 322

Merit: 105

Quote from: papampi on August 03, 2017, 09:30:25 AM

Awesome
Thanks a lot
Can I copy the stats and bin from 1.4 to 1.5 ?
And another question, If a coin/algo exist in all MPH, Zpool and Hash , how does it decide to mine on which one when I use triple switcher miner?

Yes, you can copy both folders. It chooses pool with max profit, can change in each interval.

papampi

full member

Activity: 686

Merit: 140

Linux FOREVER! Resistance is futile!!!

Awesome
Thanks a lot
Can I copy the stats and bin from 1.4 to 1.5 ?
And another question, If a coin/algo exist in all MPH, Zpool and Hash , how does it decide to mine on which one when I use triple switcher miner?

tutulfo

full member

Activity: 322

Merit: 105

Version 1.5

Added to spnova: Komodo(KMD), monero (XMR), CHAINCOIN (CHC), ETHEREUM+DECRED (ETH+DCR), ETHEREUM+LIBRARY (ETH+LBRY)
Removed from spnova: Bitcoin Cash (BCC), reason not viable mine with GPU
Fixed equihash not working on Miningpoolhub

papampi

full member

Activity: 686

Merit: 140

Linux FOREVER! Resistance is futile!!!

changlog.txt shows version 1.5 changes but there is no 1.5 tag in github ?
changes committed in master ?

rr32btg

newbie

Activity: 1

Merit: 0

Quote from: OverEasy on August 02, 2017, 08:42:49 AM

How about a *nix version?
Thx

Currently I develop somthing nearly same but for linux with tons of new features.
Whats about release time? At this moument I can't tel some kind of release date because of work on two high priority projects at main work, but brobably it will be released in this month.

Topic: Megaminer 6.3 - Multi pool / Multi Algo launcher - page 56. (Read 70970 times)