Pages:
Author

Topic: MindMiner v6.21 - miner manager program with online monitoring - page 21. (Read 31633 times)

member
Activity: 825
Merit: 18
MindMiner developer
Why not allowing both calculations at the same time MPH and NH, so people have the feel for the market?

One more for you:
In case of multiple rigs with multiple cards, 1060 some 3G and 6G (also different vendors). In order to maximize profit in current market conditions to max profit you need logic from nicehash, which benchmarks every card individually then creates the strategy for max profit. In following example: 3 different cards, Zotac 1060 6G, EVGA 1060 SC 3GB and EVGA 1060 6GB,...it's using multi matching,...so on NH latest beta, 12 gpu system, current estimate NH 8.8 usd vs MM 7.9 usd - yes we all know rough estimates, but still noticeable difference.


This is using ethash, with excluded 3gb cards,...now one variant is to use the rest of the gpu's with BEFORE/AFTER script to run separate instance of a miner, but you have to set it up manually, tomorrow or in next few hours everything changes.,..so it's not a reliable system that needs constant "maintenance". Any ideas?

After benchmarking is the hashrate final? Or when it's running it's constantly updating the values? Valuable information for tweaking the systems.

Yes, calc both and choose one is more profitable, if enabled both.
Now, while I do not want to complicate the logic of grouping the GPU.
Hashrate is updating during mining. See "AverageHashSpeed" parameter in main config.
member
Activity: 825
Merit: 18
MindMiner developer
MindMiner 2.55

* Showing balance on MPH for other currencies.
newbie
Activity: 77
Merit: 0
Would it be possible to add in BTC profit for last 24 hours total and for each pool, so it looks something like this:

Code:

Pool      Confirmed, BTC Unconfirmed, BTC Balance, BTC Balance, USD | 24hour, BTC  24hour, USD
----      -------------- ---------------- ------------ ------------ |--------------- -----------
BlazePool     0.00048384       0.00007841   0.00056225         3.67 | 0.00012345     0.80
NiceHash      0.00037618       0.00000000   0.00037618         2.46 | 0.00067890     4.42
Total:        0.00125737       0.00007841   0.00133578         8.72 | 0.00080235     5.23

It doesn't have to look excactly like that, but 24 hour stats would be great.
member
Activity: 130
Merit: 10
Thanks for response.

Right now profit on NH lower then MPH and choose MPH for this algo. Disable MPH in MPH.config.txt and you see NH (cnv7, eth).

Why not allowing both calculations at the same time MPH and NH, so people have the feel for the market?

One more for you:
In case of multiple rigs with multiple cards, 1060 some 3G and 6G (also different vendors). In order to maximize profit in current market conditions to max profit you need logic from nicehash, which benchmarks every card individually then creates the strategy for max profit. In following example: 3 different cards, Zotac 1060 6G, EVGA 1060 SC 3GB and EVGA 1060 6GB,...it's using multi matching,...so on NH latest beta, 12 gpu system, current estimate NH 8.8 usd vs MM 7.9 usd - yes we all know rough estimates, but still noticeable difference.


This is using ethash, with excluded 3gb cards,...now one variant is to use the rest of the gpu's with BEFORE/AFTER script to run separate instance of a miner, but you have to set it up manually, tomorrow or in next few hours everything changes.,..so it's not a reliable system that needs constant "maintenance". Any ideas?

After benchmarking is the hashrate final? Or when it's running it's constantly updating the values? Valuable information for tweaking the systems.
member
Activity: 825
Merit: 18
MindMiner developer
@Quake4  Really like you're multiminer, i'm testing it on one of my rigs, will give you later a full review and possible suggestions for the future.
Do you need to do anything special in order to include full nicehash support? Like cryptonightv7 and ethash are missing from calculations,...MPH is calculating properly.

1) What about adding support for nicehash excavator on their pool? Yes I know you're not allowed to redistribute it, but as an option so if there's a big order on nicehash then everybody gets a piece. This way you have one multiminer that does it all.
2) How's is mining fee implemented?

Keep up the good work.
Thanks.
Yes, MM have full support of NH include internal wallet. Right now profit on NH lower then MPH and choose MPH for this algo. Disable MPH in MPH.config.txt and you see NH (cnv7, eth).

1. Neoscrypt & Lyra2v2 in excavator equal klaust & dredge. one 1070 equal 1.06Mh & 40.5Mh
I see no reason to add.
2. First run after approx 3,5 hour to 4-6 min and all next after 7-9 hour again 4-6 min.
member
Activity: 130
Merit: 10
@Quake4  Really like you're multiminer, i'm testing it on one of my rigs, will give you later a full review and possible suggestions for the future.
Do you need to do anything special in order to include full nicehash support? Like cryptonightv7 and ethash are missing from calculations,...MPH is calculating properly.

1) What about adding support for nicehash excavator on their pool? Yes I know you're not allowed to redistribute it, but as an option so if there's a big order on nicehash then everybody gets a piece. This way you have one multiminer that does it all.
2) How's is mining fee implemented?

Keep up the good work.
member
Activity: 825
Merit: 18
MindMiner developer
MindMiner 2.54

* Updated ccminer enemy to version 1.12.
member
Activity: 825
Merit: 18
MindMiner developer
can you update whn  you have a chance?
In process ...
newbie
Activity: 46
Merit: 0
hey. trying your project for a few days now, really liking it.

z-enemy 1.12 final has been made public:

https://mega.nz/#!BbhRmAIC!K_SXI6Otxaz0apxghbbezW8n2E3Py-Uln6GSTbiVO4w

can you update whn  you have a chance?

thanks you for all your work.

member
Activity: 825
Merit: 18
MindMiner developer
MindMiner 2.53

* Fix main loop freeze.

Please, manual rerun MindMiner.
member
Activity: 825
Merit: 18
MindMiner developer
MindMiner 2.52

* Added balloon miner version 1.0.2.
member
Activity: 825
Merit: 18
MindMiner developer
MindMiner 2.51

* Removed claymore cryptonote cpu miner. Its stopped right work of MM.

Please press M key and remove miner claymore-cn-40 or change claymore-cn-40.config.txt file, property Enabled to false.
member
Activity: 825
Merit: 18
MindMiner developer
Blockmasters dont respond, i just restart the miner and i get this error
Now, blockmasters is fork fine. Try it.
member
Activity: 825
Merit: 18
MindMiner developer
member
Activity: 825
Merit: 18
MindMiner developer
MindMiner 2.50

* Added miner cryptodredge 0.6.0. Fastest miner for Lyra2rev2 algo.
* Updated cast xmr miner to version 1.3.0.
jr. member
Activity: 39
Merit: 1

do you have a channel of discord? Smiley
member
Activity: 825
Merit: 18
MindMiner developer
MindMiner 2.49

* Added mapping aeriumx to aergo for ccminer enemy.
member
Activity: 825
Merit: 18
MindMiner developer
Blockmasters dont respond, i just restart the miner and i get this error

https://imgur.com/a/Y6a2Ybt
Yes, API blockmaster dont respond.
You can try: http://blockmasters.co/api/currencies
Write him to the Discord.
Enable ZergPool or Zpool for example.
newbie
Activity: 38
Merit: 0
Blockmasters dont respond, i just restart the miner and i get this error

https://imgur.com/a/Y6a2Ybt
member
Activity: 825
Merit: 18
MindMiner developer
MindMiner 2.48

* Some tweaks for algos.
Pages:
Jump to: