[Minera v0.9.0] Your next mining dashboard - S9/L3+/D3/CPUminer/CGminer/BFGminer - page 115.

michelem

legendary

Activity: 1015

Merit: 1000

Quote from: Flep182 on August 27, 2014, 09:58:52 AM

I have NiceHash, CM, Ghash and Multipool setup. And had the donationpool under it. I don't think it will happen often that Nicehash, CM, Ghash and multipool are down but that the ghashmultipool is up

It's been reported before and I haven't seen a "fixed" notice but I could've missed that

Have tried it a week ago again and when I got home one of my RPi's was running donationpool for more than the 15 minutes I had put in Wink

Let me understand, if you go to settings page -> donation pool -> View your past donations: can you see the right donations or they have unexpected time periods?

Another question, what miner do you use? And, can you see what the miner log says when a jumping pool happens?

Thanks!

Flep182

legendary

Activity: 938

Merit: 1007

Quote from: michelem on August 26, 2014, 10:12:41 AM

Quote from: Flep182 on August 26, 2014, 09:50:32 AM

Is there a solution already for the bumping down the poollist which ends up on the donationpool?

Because I want to donate something, but would be ok with giving 15 minutes a day but not keeping it as last pool in the list as it will get much higher than 15 minutes a day then Wink

What do you mean? Is it randomly jumping into donation pool? Otherwise, just keep 3/4 different pools of yours and you should be fine.

I have NiceHash, CM, Ghash and Multipool setup. And had the donationpool under it. I don't think it will happen often that Nicehash, CM, Ghash and multipool are down but that the ghashmultipool is up

It's been reported before and I haven't seen a "fixed" notice but I could've missed that

Have tried it a week ago again and when I got home one of my RPi's was running donationpool for more than the 15 minutes I had put in Wink

michelem

legendary

Activity: 1015

Merit: 1000

@marty1972 we need more info, what miner do you use? did you try another one? Can you see what the miner log says when this happens?

@pjcltd that should be easy

@giopi if latest bfgminer/cgminer works with Anminer S3, Minera will work too.

Giopi

member

Activity: 67

Merit: 10

Work with antminer s3?

pjcltd

legendary

Activity: 1778

Merit: 1003

NodeMasters

Hi guys I'm useing this system on all my miners and one thing
I would like is the ability to name a pool
I run my own pool server and all the stratus lines are the same apart from the port no.

I just think it would be nice to have it.

Thanks and keep up the very good work.

Axiste

full member

Activity: 152

Merit: 100

michelem is going to need more info than that.. what miner? etc etc.

I have 4 pools plus the donation pool, and minera only swaps to the donation pool for the 30 mins I have set, and only switches to a lower priority pool when the first is down... hasnt ever done what you have described.

marty1972

newbie

Activity: 35

Merit: 0

Hi there,

I noticed that Minera 0.3.5 has a little bug. It is what I renamed the "pool jumping" bug. I configured 4 pools and suddenly it started to "jump" on the second, the third and then back to first one, even if the first pool (with 0 priority) was alive. That's quite peculiar, isn't it?

Cheers,
Marty

madmartyk

legendary

Activity: 2702

Merit: 1030

Yes I am a pirate, 300 years too late!

With CPUMiner what causes this when you try to connect to a pool?
[2014-08-26 17:34:40] stratum_recv_line failed
[2014-08-26 17:34:40] ...retry after 5 seconds
[2014-08-26 17:34:46] stratum_recv_line failed
[2014-08-26 17:34:46] ...retry after 5 seconds
[2014-08-26 17:34:51] stratum_recv_line failed

I can restart the miner a few times and usually get it to accept shares, but it's a real pain...

gigica viteazu`

sr. member

Activity: 458

Merit: 250

beast at work

Quote from: michelem on August 26, 2014, 09:08:49 AM

Is it a Minera install from image file or a manual install?

manual install... but nwoolls answer fixed the problem

thank you nate

Axiste

full member

Activity: 152

Merit: 100

I have 4 pools + Donation pool, and i have donate set to 30 mins a day, it only mines on the donate pool for 30 mins, or if my other 4 pools are down (so far i have never had more than 1 down at a time..)

michelem

legendary

Activity: 1015

Merit: 1000

Quote from: Flep182 on August 26, 2014, 09:50:32 AM

Is there a solution already for the bumping down the poollist which ends up on the donationpool?

Because I want to donate something, but would be ok with giving 15 minutes a day but not keeping it as last pool in the list as it will get much higher than 15 minutes a day then Wink

What do you mean? Is it randomly jumping into donation pool? Otherwise, just keep 3/4 different pools of yours and you should be fine.

madmartyk

legendary

Activity: 2702

Merit: 1030

Yes I am a pirate, 300 years too late!

Quote from: nwoolls on August 26, 2014, 09:27:42 AM

Quote from: madmartyk on August 26, 2014, 09:11:18 AM

Quote from: nwoolls on August 26, 2014, 08:57:00 AM

Quote from: madmartyk on August 26, 2014, 08:55:35 AM

Anyone out there using BFGMiner with Gridseed blades? What is the command like that should be entered in options to get the correct speed?

Thanks!!

Try:

Code:

--set gsd:clock=840

Nope, same thing, lots of HW errors and the speed shoots up the 2.8 Mh per blade.

2.8 Mh/s is the correct speed per blade. Maybe you are not providing enough power to them?

840 is what I use but you can try adjusting it down if it is too high for your hardware.

I'll give it a try again when I get home. I usually run at 838 and with CPUMiner I get very few errors. BFGMiner has no issues with the pool I use where CPUMiner has to be started and stopped a few times before it starts accepting.

Flep182

legendary

Activity: 938

Merit: 1007

Is there a solution already for the bumping down the poollist which ends up on the donationpool?

Because I want to donate something, but would be ok with giving 15 minutes a day but not keeping it as last pool in the list as it will get much higher than 15 minutes a day then Wink

nwoolls

hero member

Activity: 840

Merit: 1002

Quote from: madmartyk on August 26, 2014, 09:11:18 AM

Quote from: nwoolls on August 26, 2014, 08:57:00 AM

Quote from: madmartyk on August 26, 2014, 08:55:35 AM

Anyone out there using BFGMiner with Gridseed blades? What is the command like that should be entered in options to get the correct speed?

Thanks!!

Try:

Code:

--set gsd:clock=840

Nope, same thing, lots of HW errors and the speed shoots up the 2.8 Mh per blade.

2.8 Mh/s is the correct speed per blade. Maybe you are not providing enough power to them?

840 is what I use but you can try adjusting it down if it is too high for your hardware.

madmartyk

legendary

Activity: 2702

Merit: 1030

Yes I am a pirate, 300 years too late!

Quote from: nwoolls on August 26, 2014, 08:57:00 AM

Quote from: madmartyk on August 26, 2014, 08:55:35 AM

Anyone out there using BFGMiner with Gridseed blades? What is the command like that should be entered in options to get the correct speed?

Thanks!!

Try:

Code:

--set gsd:clock=840

Nope, same thing, lots of HW errors and the speed shoots up the 2.8 Mh per blade.

michelem

legendary

Activity: 1015

Merit: 1000

Quote from: gigica viteazu` on August 26, 2014, 08:51:34 AM

Quote from: Axiste on August 26, 2014, 07:28:19 AM

The Wallet and Proxy can be the same machine, so:

Minera (BFGminer) > Server (BFGMiner + Wallet)

yes, my diagram was more about the connection logic

, anyway my BFGminer doesn`t wanna start:

Code:

./bfgminer: error while loading shared libraries: libblkmaker_jansson-0.1.so.0: cannot open shared object file: No such file or directory

any idea ?

Is it a Minera install from image file or a manual install?

nwoolls

hero member

Activity: 840

Merit: 1002

Quote from: madmartyk on August 26, 2014, 08:55:35 AM

Anyone out there using BFGMiner with Gridseed blades? What is the command like that should be entered in options to get the correct speed?

Thanks!!

Try:

Code:

--set gsd:clock=840

nwoolls

hero member

Activity: 840

Merit: 1002

Quote from: gigica viteazu` on August 26, 2014, 08:51:34 AM

Code:

./bfgminer: error while loading shared libraries: libblkmaker_jansson-0.1.so.0: cannot open shared object file: No such file or directory

any idea ?

Maybe try:

Code:

sudo ldconfig

madmartyk

legendary

Activity: 2702

Merit: 1030

Yes I am a pirate, 300 years too late!

Anyone out there using BFGMiner with Gridseed blades? What is the command like that should be entered in options to get the correct speed?

Thanks!!

gigica viteazu`

sr. member

Activity: 458

Merit: 250

beast at work

Quote from: Axiste on August 26, 2014, 07:28:19 AM

The Wallet and Proxy can be the same machine, so:

Minera (BFGminer) > Server (BFGMiner + Wallet)

yes, my diagram was more about the connection logic

, anyway my BFGminer doesn`t wanna start:

Code:

./bfgminer: error while loading shared libraries: libblkmaker_jansson-0.1.so.0: cannot open shared object file: No such file or directory

any idea ?

Topic: [Minera v0.9.0] Your next mining dashboard - S9/L3+/D3/CPUminer/CGminer/BFGminer - page 115. (Read 850502 times)