Topic: [Minera v0.9.0] Your next mining dashboard - S9/L3+/D3/CPUminer/CGminer/BFGminer - page 44. (Read 850409 times)

I don't recommend to plug them directly to PI, usually this won't work for multiple devices (only one could work), you need a powered and good USB HUB.

Then you cannot run both on the same miner instance like bfgminer or you need to find the perfect config line to bring up both in a single miner instance, not simple.

You should first try one, then the other one and only when both is working (alone) you could try to setup both together, or you have to use two miner instances (but Minera supports only one).

bfgminer with root all Miner were detected.
Unfortunately, there is at frequency "not available" for all Miner.
How do you see there the frequencies?
How can it be that is displayed 32.72% Error?

I picked up a Gridseed G-Blade and a Zeus x6.
I would like to run these both on a Raspberry PI, and ran-accross Minera.
It looks like it can support this, so I just wanted to double-check before I screw-everything-up or blow-up my miners...

Im assuming I can directly plug in the USB ports of the mining HW into the PI and use this software to mine with both my G-Blade and Zeus at the same time?

Can you give me right settings for Antminer U3 in Minera?
Which CPU/CG/BFGminer to choose? Should I add custom parameters?
It will be fresh image in Pi 3 - starting from scratch.
Thanks in advance.

ANTMINER U1/2/3 DEVICES

--anu-freq     Set AntminerU1 frequency in MHz, range 150-500 (default: 200)
--au3-freq     Set AntminerU3 frequency in MHz, range 100-250 (default: 225.0)
--au3-volt     Set AntminerU3 voltage in mv, range 725-850, 0 to not set (default: 750)

By default, Antminer U1 devices run at a clockspeed of 200. This command allows
you to specify a chosen frequency to attempt to run all ANU devices at. Cgminer
will try to find the nearest frequency the device supports and will report if
the frequency is not exactly as requested. Note that cgminer reports hashrate
ONLY FROM VALID HASHES so if you increase the frequency but your hashrate does
not increase or it decreases and hardware errors start showing up, you have
overclocked it too much. In the worst case scenario it will fail to start at too
high a speed. Most will run happily up to 250.

This is pretty tuff and cool idea. I will try this out. i already tried minergate some Days ago. Hoping finding with Minera v0.7 an better Option

Keep it Up!

regards

Hello...

I'm new to the topic Raspberry and Minera and have a question.

Minera 0.7.0 under BFGminer runs fine on the Raspberry 2B. Now I have 4 Miner (Block Erupter AntMiner 333 MH, Antminer U1 1,8 GH, Red Fury 2,5 GH, Bi-Fury 5 GH), where I the Red Fury and Bi-Fury not get it to run. Under Windows and BFGminer are all found (COM3,4,5,6).

How can I integrate them under Minera. Unfortunately, I do not know me from using Linux.
Would be very grateful for a tip.

Greetings from Karlsruhe
sternenprinz

I presume I need being as root before running that miner using:?

Thanks

If you connect to your Minera via terminal binaries are located here:


So your command becomes:

Thank Michelem,

Ok so according what I read, it contain bfgminer!
I also know in linus there a program named as "screen" so I can keep process running when I terminate SSH section, does this included on mineral image?

I am not interested using minera GUI yet as way to confusing toward pool setting, starting bfgminer and to recognize gridseed bladr 80 chip!
In fact, Those probblems were happening when I done all manual install.

What I just want doing is running bfgminer program via terminal when logging through putty and without through GUI at all

From SD where is this bfgminer located and how to execute that program via terminal as I already explained?
According to Toptek there no *.exe in linus and I intend running bfgminer on a raspberry pi2

Of course manual settings will be needed as we would usual see in windows OS inside command line. Toptek knows what I'm talking about!
Here a windows sample settings:

Knowing proper syntax on linux (rasbberry PI 2) would help!
I will try executiing without devices attached on PI as I test to see if bfgminer is running!

Sure it contains the Raspberry OS too the image you downloaded is a full Raspbian operating system with Minera inside pre-installed.

Of course when you put that in your SD Card everything else will be deleted and overwritten by Minera.

These goes all the fun of doing it jk  i guess my PI's will become useless, one big question and i won't ask anymore and just wait will it still be a controller for miners that's why i use it mostly all most everything else is off i really have no use for it beyond that ? that's my  only question .I'll wait for the rest.

I really hope you will not need the Minera you know anymore by July ;-) No PHP No complex installs and a new way to manage everything is coming...

BTW for the errors problem I will try to see something, thanks for the files

cool sent the info asked for , i got request not sure if it's poss wonder if you can make minera run numbers like bfg/CG 's real time black screen does not sure how hard that would be or even if it's poss and willing to pay a little extra for it but do it for every one ?.

I can see some place down the road others might want it and it could make you a lot later on just a thought .


I mean real time stats not parsed stats


tip this will only work right if you use it with ubuntu 15 or lower , I still do it the old school manual way for other reason.



because of  php5 and Ubuntu 16 there is no support unless you share it for php5 , that may not work but everything else does update fine after a little editing here or there  and I'm sure at some Point minera might run better with Ubuntu 16 , but right now till July i don't suggest anyone try it on PI's till July's update for Pi's it is suppose to fix a lot and not just on Rasp berry pi's if you can install Ubuntu on other PI's  it will more then likely will upgrade to ubuntu 16 .

Hey , I love minera over them all well if you look around there is no better one to be had that does what minera does or will do as time goes on .

i have been meaning to ask thu why minera all ways show the wrong % for hard ware error if you need screen shots will supply but it's all way been that way the rest of minera seems on track .,..


example what i mean minera shows the right Hardware error but if like at the command line for bfg or cg the % is different


minera shows 5.39% for 74 while CG shows 74 (0.003%)

same with BFG but i just rebooted BFG so right now it will be off a lot . seems my Alchemist miner from time to time needs a reboot i don't think that's minera at all ... i only have five out of eight boards online right now due to i need to have another 240 line installed if i want to use it at full speed and the rest of my very small farm to gather  on 240 power ( i don't like the idea of a lot of miners running over 110). it is one of the best script miners you can get right now beside the A2 till later this summer ......  when the A4 comes out if you think about it,the A4 is not really gonna use less power just do more but not use less power. my thought on less power would be 500 watts @  500 MH not 1100 @ 500 MH to me that is truly using less power (500@500) but don't get me wrong the A4 will be nice ..if i have the cash and they sell to the public il be getting one of there 128 MH A4 miners and will be buying some A2 once they hit the market cheap im sure they will be but still very use able with minera.