[Minera v0.9.0] Your next mining dashboard - S9/L3+/D3/CPUminer/CGminer/BFGminer - page 41.

michelem

legendary

Activity: 1015

Merit: 1000

Quote from: zOU on September 23, 2016, 01:31:03 PM

very neat !

For temperature, do you support display of all the temps iof a Miner ? (1 sensor per hashboard) ?

Yes I will add that but only to be displayed, for the scheduled rules they will use the device temp (that I think it's an average of the boards)

zOU

hero member

Activity: 728

Merit: 500

★ these are stars ★

very neat !

For temperature, do you support display of all the temps iof a Miner ? (1 sensor per hashboard) ?

michelem

legendary

Activity: 1015

Merit: 1000

Well,
I think it's time you deserve to see something, not much because you should see it "moving", but I hope you like a couple of static pictures to start :-)

Dashboard (Full-res)

Miner (Full-res)

New Minera is coming.

mamiakimo

full member

Activity: 197

Merit: 100

what i hope to see in the future is Freq/Temp tasks
like what a fan do to manage temp i hope to see freq did also
so i can add tasks like ( if temp exceed 95 reduce freq to 550 ) ( if temp lower than 90 increase freq to 575 ) and so on.

proctologic

sr. member

Activity: 241

Merit: 250

Finally i got it to mine with zeusminers and gridseed blades

sudo screen -dmS bfgminer ./bfgminer --scrypt -o stratum+tcp://scrypt.eu.nicehash.com:3333 -u 1AQTordUHPayyCdx5WiyBeGdG7jpLCYTQj -p x -S zus:all --set zus:chips=6 --set zus:clock=350 -S gridseed:all --set-device gridseed:clock=850

sudo screen -r

bfgminer version 5.4.2-7-g9f781b8 - Started: [2016-09-12 00:26:58] - [ 0 days 00:05:22]
[M]anage devices [P]ool management ettings [D]isplay options [H]elp [Q]uit
Pool 0: ...eu.nicehash.com Diff:62m +Strtm LU:[00:31:47] User:1AQTordUHPayyCdx5WiyBeGdG7jpLCYTQj
Block: ...74c184d7c5034416 Diff:1.73k (12.38G) Started: [00:31:47] I:?
ST:338 F:0 NB:11 AS:0 BW:[ 21/ 10 B/s] E:0.22 BS:778m
0 | 19.98/20.04/14.25Mh/s | A:17 R:0+0(none) HW:0/none
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
ZUS 0: | 1.46/ 1.32/ 2.50Mh/s | A: 3 R:0+0(none) HW:0/none
ZUS 1: | 1.42/ 1.29/ 0.00Mh/s | A: 0 R:0+0(none) HW:0/none
GSD 0: | 2.91/ 2.88/ 1.67Mh/s | A: 2 R:0+0(none) HW:0/none
GSD 1: | 2.91/ 2.88/ 1.67Mh/s | A: 2 R:0+0(none) HW:0/none
GSD 2: | 2.91/ 2.88/ 2.50Mh/s | A: 3 R:0+0(none) HW:0/none
GSD 3: | 2.91/ 2.88/ 0.00Mh/s | A: 0 R:0+0(none) HW:0/none
GSD 4: | 2.91/ 2.88/ 3.33Mh/s | A: 4 R:0+0(none) HW:0/none
GSD 5: | 2.91/ 2.88/ 3.33Mh/s | A: 4 R:0+0(none) HW:0/none

zOU

hero member

Activity: 728

Merit: 500

★ these are stars ★

Quote from: michelem on September 10, 2016, 05:18:25 AM

Quote from: mamiakimo on September 10, 2016, 12:15:29 AM

is there away to get alert on mobile and computer when antminer get high temp ?

I'm going to add this to the new Minera.

And folks with Antminers (or similar) get ready, I will need you soon to start testing the new app.

We are really close to see something. Stay tuned.

michelem

legendary

Activity: 1015

Merit: 1000

Quote from: mamiakimo on September 10, 2016, 12:15:29 AM

is there away to get alert on mobile and computer when antminer get high temp ?

I'm going to add this to the new Minera.

And folks with Antminers (or similar) get ready, I will need you soon to start testing the new app.

We are really close to see something. Stay tuned.

zOU

hero member

Activity: 728

Merit: 500

★ these are stars ★

Quote from: AlternativeMiner on September 08, 2016, 10:19:35 AM

As a newbie, I'd just like to ask if anyone else using Minera with a Gridseed Blade if there's any other config they'd particularly recommend and if my experiences with bfgminer and cpuminer are what would be expected.

if you type a word in the search box at the top right of this page, it will search this topic for the word.

Try gridseed

mamiakimo

full member

Activity: 197

Merit: 100

is there away to get alert on mobile and computer when antminer get high temp ?

AlternativeMiner

newbie

Activity: 6

Merit: 0

I'm a newbie but I've recently set up Minera from the image file on a Raspberry Pi B+ I had laying around doing nothing and hooked it up to a Gridseed Blade I got cheap on ebay. So far, I have to say I'm very impressed.

For me, I am finding that using bfgminer with pre-configured Gridseed Blade settings seems to be the best combination. I get good hash rates reported from the pools I've tested it with and these seem reasonably close to the reported device hash rates. The only issue I've seen with bfgminer is that sometimes it takes a couple of attempts to start it up and get it to recognize both devices. Once it has recognised the devices though it keeps running smoothly.

I've also tested with cpuminer, again using the Gridseed Blade preset. This combination seems to reliably detect the devices first time but I'm finding that the reported device hash rate is much lower. The pool hash rate seems about the same as with bfgminer so I'm assuming it's just cpuminer giving incorrect readings for the devices.

As a newbie, I'd just like to ask if anyone else using Minera with a Gridseed Blade if there's any other config they'd particularly recommend and if my experiences with bfgminer and cpuminer are what would be expected.

GatekeeperZA

newbie

Activity: 23

Merit: 0

appologies for being idiotic what is the solo pool for GLDcoin
am not sure how to do this with other altcoins.

I tried to edit the rpc for the goldcoin wallet and run as server but the miner does not connect.
must i explicit open certain firewall ports even though my upnp is enabled.. >?

zOU

hero member

Activity: 728

Merit: 500

★ these are stars ★

Quote from: GatekeeperZA on September 05, 2016, 03:53:55 PM

@michelem

Could you kindly post a guide to mine solo coins with minera.
Ive been trying to get it setup but have no luck ... thanks.

just plug your USB miners, setup the solo pool adress and off you go.
If you nad network miners, you have to set them to use the correct pool individually and add them to Minera as network miners for monitoring.

GatekeeperZA

newbie

Activity: 23

Merit: 0

@michelem

Could you kindly post a guide to mine solo coins with minera.
Ive been trying to get it setup but have no luck ... thanks.

michelem

legendary

Activity: 1015

Merit: 1000

Quote from: thecodeman on September 01, 2016, 08:55:24 AM

I'm having the same problem with ads after donating months ago. Now I am unable to access Minera at all. The main add appears in the center of the browser window and I can't make it go away to pull the information you are requesting.

Try to update the code:

Code:

cd /var/www/minera
sudo git reset --hard
sudo git pull origin master

To get the Minera ID from the console:

Code:

redis-cli get minera_system_id

thecodeman

newbie

Activity: 1

Merit: 0

I'm having the same problem with ads after donating months ago. Now I am unable to access Minera at all. The main add appears in the center of the browser window and I can't make it go away to pull the information you are requesting.

michelem

legendary

Activity: 1015

Merit: 1000

Quote from: hallo_frosch on August 29, 2016, 02:38:34 PM

Hi michelem,

my adds-free version of minera has re-enabled the adds, could you please assist in removing these adds again ?
I thought that one donation was enough to remove the adds permanently on each device.

Write me in PM, send me your minera ID (if you add the donation pool you can look at it as the username) and the email of the payment.

hallo_frosch

member

Activity: 87

Merit: 10

Hi michelem,

my adds-free version of minera has re-enabled the adds, could you please assist in removing these adds again ?
I thought that one donation was enough to remove the adds permanently on each device.

michelem

legendary

Activity: 1015

Merit: 1000

If you wanna stay updated with Minera news, we are on Twitter now, follow us: https://twitter.com/getminera

michelem

legendary

Activity: 1015

Merit: 1000

Quote from: GatekeeperZA on August 25, 2016, 05:31:04 PM

@michelem

Sorry to bother. new release update please.
will it include updated mining software and configs. -or will we be using the same ones
have a small issue with cgminer and bfgminer not detecting all my g-blades

can someone post their config on their g-blades what they are using eg. cpuminer / bfg miner / cgminer please
another small issue im having is that the the miners start off great but like an hour later they have dropped to
half their speed. what could be the cause of this.. ?

thanks for the great software and support guys.
was also thinking of the donation box could you not rather set in the Support Minera! sections
after the user has supported a well sort of % towards the software it would be able to remove the adds / donations.

also if you have multiple blades ive seen people using a 80 chip setting is this correct ..? doesnt seem right to me
and how would I implement the modules and chip settings.. thanks.

thanks.

I don't think I will update anymore the current Minera.
The new Minera is coming soon. (But it won't have USB miner support by now)

For any questions about miners (the hardware devices) please use the relative forum thread because I don't know much about them.

GatekeeperZA

newbie

Activity: 23

Merit: 0

@michelem

Sorry to bother. new release update please.
will it include updated mining software and configs. -or will we be using the same ones
have a small issue with cgminer and bfgminer not detecting all my g-blades

can someone post their config on their g-blades what they are using eg. cpuminer / bfg miner / cgminer please
another small issue im having is that the the miners start off great but like an hour later they have dropped to
half their speed. what could be the cause of this.. ?

thanks for the great software and support guys.
was also thinking of the donation box could you not rather set in the Support Minera! sections
after the user has supported a well sort of % towards the software it would be able to remove the adds / donations.

also if you have multiple blades ive seen people using a 80 chip setting is this correct ..? doesnt seem right to me
and how would I implement the modules and chip settings.. thanks.

thanks.

Topic: [Minera v0.9.0] Your next mining dashboard - S9/L3+/D3/CPUminer/CGminer/BFGminer - page 41. (Read 850409 times)