[Minera v0.9.0] Your next mining dashboard - S9/L3+/D3/CPUminer/CGminer/BFGminer - page 56.

michelem

legendary

Activity: 1015

Merit: 1000

Quote from: cavaliersrus on December 07, 2015, 09:14:06 AM

Quote from: michelem on December 07, 2015, 04:27:56 AM

Just to inform you I updated Minera to version 0.6.2.

This is only a maintenance version to update the dead Ghash.io Multi pool with the LTC one.

I will upload the new image file asap.

are you going to add bfgminer 5.4.* to new versions ? this will help with people buying the sidehack miners that run on the new cgminer and bfgminers

ouch, I forgot that, please guys when you need something open an issue here https://github.com/michelem09/minera/issues because I can't re-read every posts in the forum they are too much but I always read the issues and if there is something I can do I do it.

I hope to include it soon. In the meantime you can always use the build script to update your miners version. https://github.com/michelem09/minera/wiki/Getting-started#build-miners

cavaliersrus

hero member

Activity: 735

Merit: 500

★YoBit.Net★ 350+ Coins Exchange & Dice

Quote from: michelem on December 07, 2015, 04:27:56 AM

Just to inform you I updated Minera to version 0.6.2.

This is only a maintenance version to update the dead Ghash.io Multi pool with the LTC one.

I will upload the new image file asap.

are you going to add bfgminer 5.4.* to new versions ? this will help with people buying the sidehack miners that run on the new cgminer and bfgminers

michelem

legendary

Activity: 1015

Merit: 1000

Just to inform you I updated Minera to version 0.6.2.

This is only a maintenance version to update the dead Ghash.io Multi pool with the LTC one.

I will upload the new image file asap.

haharry

newbie

Activity: 5

Merit: 0

Quote from: mm5aes on November 25, 2015, 06:37:12 PM

Quote from: haharry on November 25, 2015, 04:15:23 PM

Just started using minera for my 3 gridseed blade pcb's.
At start the system says i got 3 local miners.
But 3minutes later i got 15 :S

hashing at pool says about 9mh/s. so thats ok.
Is this a bug?

Same problem for BFGminer as for Cgminer (cgdmaxlzeus)

https://i.gyazo.com/e5c10f42bc5ced9e0b15a830322a7f95.png

from log:
[2015-11-25 22:40:34] GSD 0: Failed to send work
[2015-11-25 22:40:34] GSD 3: Failed to send work
[2015-11-25 22:40:34] GSD 1: Failed to send work
[2015-11-25 22:40:35] Found GSD 4aa at /dev/serial/by-id/usb-STMicroelectronics_STM32_Virtual_COM_Port_48D8685D3031-if00
[2015-11-25 22:40:35] Found GSD 5aa at /dev/ttyACM5
[2015-11-25 22:40:35] Found GSD 6aa at /dev/ttyACM4

Run exactly the same setup to keep some plants frost free in a greenhouse - ultimate recycling....

Runs fine mostly with cpuminer. though sometimes have to restart the miner from the menu after first boot to get it to settle down.
It will also do odd things sometimes on certain pools, nicehash being most notable. Seems solid on litecoinpool and ghash.

My manual options are set to :-

--gc3355-detect --freq=800 --gc3355-chips=40

This is with a minera image. Had to recompile from source to get minerd running with a manual install on top of ubumtu mate. (it was on an orange pi which may have been the issue)
HTH

Cpuminer works just a while for me. and den stops hashing.. :/
the blades works great in windows and cgminer.

Is there any other solution here?

alrachid

member

Activity: 101

Merit: 10

Just another man trying to find his way.

Using 2 gekko sticks and seems to be working fine for now, although setup took me a little while as I got some errors. I will followup if I have any problems. Thank you for this!

Blackross

newbie

Activity: 53

Merit: 0

Quote from: michelem on November 19, 2015, 02:51:59 AM

Quote from: Blackross on November 18, 2015, 12:36:14 PM

i was wondering....

where do i change it so i can have screen running as well as echo the output to the monitor as a status, i know there's a switch to echo the miners output to a com port etc.. but the pi has a small rca driven monitor slapped to the front of the rack.

just would like to walk by and see what’s it doing at a glance instead of having to login to the pi via ssh or http (still cant login via http on the ps3 (for ultimate laziness)).

thats all, any solutions to those two options (output redirection or autologin) would be great from any of you guys here.

If you connect via SSH and type "screen -r" you can bring up the miner software output console. Type "ctrl+a" and "d" to detach it.

Oh no no i know that... just redirecting the output of "screen" to the lcd attached to the rca port of the rpi2 thats all.. there was a redirect option switch in the command line of both bfg and cgminer but, i dont know how to get it to dump it out the rca lol

I have an lcd monitor on the front of my rack and all it shows is the boot up process and not the mining process, i wouldlike to see the mining process dumped to the screen (lcd) on the front of the rack.

zOU

hero member

Activity: 728

Merit: 500

★ these are stars ★

Yes you're right

My question is: why does minera show less accepted shares than cryptoglance.

ShrykeZ

hero member

Activity: 630

Merit: 500

Quote from: zOU on November 28, 2015, 04:34:56 AM

I noticed some discrepancies between Minera and Cryptoglance.

they both report the same number of HW errors, but not the same % (and not the same number of accepted shares, hence the difference in HW error %)

HW errors are actually calculated against the accepted shares as far as I am aware? The Cryptoglance image has a large number of accepted compared to what Minera has displayed, or am I understanding your question incorrectly?

zOU

hero member

Activity: 728

Merit: 500

★ these are stars ★

I noticed some discrepancies between Minera and Cryptoglance.

they both report the same number of HW errors, but not the same % (and not the same number of accepted shares, hence the difference in HW error %)

enthus

full member

Activity: 140

Merit: 100

minera is great, i like the nice and simple gui, i hope alternative to mobile miner comes soon

mm5aes

full member

Activity: 176

Merit: 100

Quote from: haharry on November 25, 2015, 04:15:23 PM

Just started using minera for my 3 gridseed blade pcb's.
At start the system says i got 3 local miners.
But 3minutes later i got 15 :S

hashing at pool says about 9mh/s. so thats ok.
Is this a bug?

Same problem for BFGminer as for Cgminer (cgdmaxlzeus)

from log:
[2015-11-25 22:40:34] GSD 0: Failed to send work
[2015-11-25 22:40:34] GSD 3: Failed to send work
[2015-11-25 22:40:34] GSD 1: Failed to send work
[2015-11-25 22:40:35] Found GSD 4aa at /dev/serial/by-id/usb-STMicroelectronics_STM32_Virtual_COM_Port_48D8685D3031-if00
[2015-11-25 22:40:35] Found GSD 5aa at /dev/ttyACM5
[2015-11-25 22:40:35] Found GSD 6aa at /dev/ttyACM4

Run exactly the same setup to keep some plants frost free in a greenhouse - ultimate recycling....

Runs fine mostly with cpuminer. though sometimes have to restart the miner from the menu after first boot to get it to settle down.
It will also do odd things sometimes on certain pools, nicehash being most notable. Seems solid on litecoinpool and ghash.

My manual options are set to :-

--gc3355-detect --freq=800 --gc3355-chips=40

This is with a minera image. Had to recompile from source to get minerd running with a manual install on top of ubumtu mate. (it was on an orange pi which may have been the issue)
HTH

haharry

newbie

Activity: 5

Merit: 0

Just started using minera for my 3 gridseed blade pcb's.
At start the system says i got 3 local miners.
But 3minutes later i got 15 :S

hashing at pool says about 9mh/s. so thats ok.
Is this a bug?

Same problem for BFGminer as for Cgminer (cgdmaxlzeus)

https://i.gyazo.com/e5c10f42bc5ced9e0b15a830322a7f95.png

from log:
[2015-11-25 22:40:34] GSD 0: Failed to send work
[2015-11-25 22:40:34] GSD 3: Failed to send work
[2015-11-25 22:40:34] GSD 1: Failed to send work
[2015-11-25 22:40:35] Found GSD 4aa at /dev/serial/by-id/usb-STMicroelectronics_STM32_Virtual_COM_Port_48D8685D3031-if00
[2015-11-25 22:40:35] Found GSD 5aa at /dev/ttyACM5
[2015-11-25 22:40:35] Found GSD 6aa at /dev/ttyACM4

zOU

hero member

Activity: 728

Merit: 500

★ these are stars ★

custom build should be in /var/www/minera/minera-bin/custom

then they'll appear in the custom miner page of the settings.

Check the readme

Marvell1

legendary

Activity: 2408

Merit: 1102

Leading Crypto Sports Betting & Casino Platform

how do I point minera to a different folder for my install of bfgminer ? Im having poblems building the version in the src folder but I already have a working install on another folder

nowaltcoin

full member

Activity: 158

Merit: 100

Hi,

i get nanofury and redfury to run (only on powered USB2-Hubs) ---> with USB3-hubs i did not get my sticks shown to the OS
Power consumption (to keep in mind for the psu)
Nanofury up to 700mA
Redfury up to 500mA

With bifury (they need up to 900mA) im struggeling Roll Eyes

Have a nice day

P.S.: using cgminer Grin

ShrykeZ

hero member

Activity: 630

Merit: 500

Quote from: zOU on November 24, 2015, 04:38:31 AM

Quote from: ammi84 on November 24, 2015, 04:20:51 AM

Quote from: zOU on November 23, 2015, 02:30:57 PM

It depends on the miner and version you're using.

Minera is just a User Interface, not a mining SW.

well ... i'm ok with cgminer or bfgminer ...
just want to use it with my RPi and the Gekko-STicks

Then you'll have to get bfgminer 5.4+ or compile the special version of cgminer.

It's all explained in the gekkostick thread

Can confirm that this works, using bfgminer on my setup, had no problems with it.

ammi84

sr. member

Activity: 462

Merit: 251

:-) ok
i will give it a try Cheesy

zOU

hero member

Activity: 728

Merit: 500

★ these are stars ★

Quote from: ammi84 on November 24, 2015, 04:20:51 AM

Quote from: zOU on November 23, 2015, 02:30:57 PM

It depends on the miner and version you're using.

Minera is just a User Interface, not a mining SW.

well ... i'm ok with cgminer or bfgminer ...
just want to use it with my RPi and the Gekko-STicks

Then you'll have to get bfgminer 5.4+ or compile the special version of cgminer.

It's all explained in the gekkostick thread

ammi84

sr. member

Activity: 462

Merit: 251

Quote from: zOU on November 23, 2015, 02:30:57 PM

It depends on the miner and version you're using.

Minera is just a User Interface, not a mining SW.

well ... i'm ok with cgminer or bfgminer ...
just want to use it with my RPi and the Gekko-STicks

zOU

hero member

Activity: 728

Merit: 500

★ these are stars ★

Quote from: audiotopix on November 24, 2015, 12:59:23 AM

Can minera be used with an A2 terminator?

https://github.com/michelem09/minera

Quote

Minera is a complete system to manage and monitor your bitcoin mining hardware.

Since the 0.3.x version Minera supports the following miner softwares:

CPUminer-GC3355 fork
BFGminer latest original version
CGminer latest original version
CGminer Dmaxl Zeus fork
Since the 0.5.x version Minera supports also network miners as:

Antminer S1 / S3 / S5
Rockminer
Any network miner with cgminer
Other Minera system

Topic: [Minera v0.9.0] Your next mining dashboard - S9/L3+/D3/CPUminer/CGminer/BFGminer - page 56. (Read 850502 times)