Topic: [MinerEU.com]Scrypta controller for 28nm Innosilicon A2 Miners (Read 7507 times)

When are you going to add wifi support?

hy i've an a2 mini from minereu

is it possible to. split hash like gridseed blade with cgminer and balance command

there is a miner fir a2

I am having this issue too.  I tried the quick fix and it didn't work for me.  Any suggestions?

thanks!

I have an A2 that was hosted by Gaw on the way  

MY DEAR FRIEND, CAN YOU PLEASE POST a full copy of the software with the correct miner?  My original factory mining sw SD card no longer works.  It did in the beginning.  I have 2 a2 terminators just gathering dust..

Find a quick fix.
Take the cgminer provided by innosilicon on the card.
It is originally located in /var/www

If you installed the Minereu software the original content on /var/www has been moved to /opt/minereu_back$(date +"%Y%m%d%H%M%S"). Take the earliest one you have as it is the one that was originally on the card.

Copy the cgminer to /opt/scripta/bin .
Kill the cgminer that runs, it will automatically restart in under a minute.

For every body that is not familiar with the pi architecture follow the steps:
1. ssh to the raspberry pi, if you use windows download putty http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html
2. login with user "pi" and password "innosilicon"
3. take the root 4. copy the original cgminer
5. end the running cgminer:
   a.     b.  copy the first number you see printed, that is the pid (process id) of the running cgminer. If using Putty just double click on it it will copy it to clipboard.
   c. past your number and press Enter. If using Putty right click will do the paste.

6. Wait a little, your miner should came up in under 1 minute.

Happy mining,

The Cube

I have the same problem, it seams to be a scripta problem. I have the same problem on two A2 mega.
When Using the provided Innosilicon image it runs with no problem.
I think it is the cgminer binary, I will do some tests to swap the cgminer from scripta with the one it came on the shippedon the card.

I will reply if this fix the problem.

Thanks,

I have A2MEGA nad  the same problem, i'm installing RASPIAN next to install Scripta and miner dose'nt work :/ If i use A2 software my miner is up for 3 munutes and hashrate gone down :/ I use   A2 Image Orginal (2014-05-21) user: pi / psw: innosilicon
- InnoSilicon Customized WebGUI RPI Image for A2 Miners (2014-06-18) static ip address 192.168.1.168 psw: innosilicon

And - InnoSilicon Customized WebGUI RPI Image for A2 Miners (2014-06-18) static ip address 192.168.1.168 psw: innosilicon
 on this my machine is up for 5 minutes :/

i use https://bitcointalksearch.org/topic/ultra-under-overclock-image-for-a2-innosilicon-by-emdje-v50-672969 Overclock image for A2 Innosilicon by Emdje and my miner for firs 10 sec got 110hasrate next to still donw to 0. :/ WTf?

MinerEU please help us! We buy machnes but we can't mines!


http://zapodaj.net/d70e5a7ee9223.jpg.html

Regards

Dear colleagues and Miner.eu

When I switch the A2 new mini on, and open your scripta interface, both blades are mining normally. However, in about 30 seconds, their hash rate begins to decrease and reaches 0 (zero) in 20-25 seconds. And stays there indefinitely. Restarting the miner does not help, neither does rebooting Raspberry. Only if I physically turn the power supply off and on again, the blades start working, but everything happens again like I described in the beginning.

Please, help.

-------------------------------------------

21/09/2014

I sent almost exactly the same text directly to Miner.eu yesterday. Received an answer today:
-----------
Hi,

You could search youtube to find some instruction of setting up the miner.

https://github.com/MinerEU/scripta_a2
It is our image download link for the miner, please check this out as well.

good luck!
--------------

I wonder, do they read their customers' mails at all?

I sent another mail - quote below:

--------------

Dear Support.

1. There are no videos depicting the setup of A2 New Mini Terminator with Raspberry PI built-in. None. Not on YouTube, not anywhere.
2. As I have already mentioned, I installed your Scripta miner and interface using CURL from Raspberry. Successfully.

Let me, please, specify the problem again.

1. A2 New Mini Terminator is powered correctly.
2. Immediately after power-on, when Raspberry loads, your Scripta interface shows that both blades are working normally.
3. In 30-35 seconds, hashing rate on both blades starts to decrease.
4. In another 30-40 seconds, both blades come to zero.
5. Miner restart or Raspberry reboot does not help.

Could you, please, help. I can execute and send you results of any log outputs, grep - whatever you need.

Regards

--------------

I had the same problem mate. Issue is that with the new version they have integrated certificate and authentication on HTTPS port. So basically if you are trying to open remotely the URL of your miner you need to go to your router and add a rule to allow traffic on port 443 to pass to internal IP of the miner. That fixed the problem for me.

After installing the latest yesterday morning it now refuses to login. Keeps looping around the login page

MinerEU scripta has many bugs. You need to update it.
In the beginning it works fine. But now I can't change pool and soft reset cgminer(RPC) doesn't work.
How can I fix it?
Thanks
   

Thanks for this feedback, we will try to work on it and get it implemented.

debugging the issue involves you ssh to the console.

1, sudo s
2, ps -ef |grep cgminer |grep -v grep  if you don't see any thing, means the cgmienr didn't come up

3, at this point, we need to see what error message you got there.   
you need to run (this is in the lastest image )
[/code][/code][/code]

you just have to edit a the file /etc/network/interfaces (or similar, I do not remember exactly).
Just put your IP address and reboot (restarting the network also work of course, but I like a little reboot from time to time...).

Oh one other thing, where can I hard code the network settings.  I don't care much for miner on DHCP.

would be a nice thing to add into the interface.

What does it mean when I get scripta down message?

At that point the interface seems locked, and I can no longer telnet into the unit.
Then I have to physically reboot the system as the reboot on the main screen doesn't seem to work either.
Unless I'm not entering root password correctly - btw what is root password on this install?  minereu?

Otherwise I like the interface and the adjustment abilities to the units.
I'm able to increase some devices and decrease others to keep hw errors at around 5% while maintaining 92mh

thanks,

Could you add something like a pool balance?
I mean like allow me to say for example:

60% of my mining power goes to this pool and 40% to this pool...

That would be great!

Thank you in advance

NO now it shows TH as my speed,and mines very slow!

Hey everything working now fine, i just use a command to update the software, now everything works.