Topic: MinerGate Pool [PPS 1.5%] [PPLNS 1%] ZEC-ETH-ETC-BTC-LTC-BCN-XMR-QCN-FCN-XDN - page 16. (Read 306040 times)
August 18, 2016, 04:50:00 PM
Please consider a pool for Bitcedi https://bitcointalksearch.org/topic/annbxcbitcedi-upto-106-fixed-deposit-interest-with-encrypted-messaging-1474935
August 17, 2016, 12:29:20 AM
Hello, i noticed smart miner likes to mine XMR, which is fine, I turned down the cpu cores to 5, just to ease the load on my computer a bit.. at 5 it runs at about 75-85% in the task manager. And I'm currently getting 50 H/s
What I'm curious about is, why is my gpu not mining? it always says 0/00 HS, and it's intesity is at 4. I tried 1/2/3/4 and it just sits at 0 h/s.
My gpu card is AMD 5800 series.
I'm having the same issue with my AMD cards, can't seem to mine anything (however they are low spec) - NVIDIA cards seem to work fine on the other hand.
August 16, 2016, 01:26:09 PM
Hello, i noticed smart miner likes to mine XMR, which is fine, I turned down the cpu cores to 5, just to ease the load on my computer a bit.. at 5 it runs at about 75-85% in the task manager. And I'm currently getting 50 H/s
What I'm curious about is, why is my gpu not mining? it always says 0/00 HS, and it's intesity is at 4. I tried 1/2/3/4 and it just sits at 0 h/s.
My gpu card is AMD 5800 series.
August 08, 2016, 05:23:34 AM
Hi Nopedope,
I notice that my unconfirmed balance for BCN is very high. Do you know if there are any problems with the process that balances our accounts?
Is anybody else seeing the same issue?
I notice that my unconfirmed balance for BCN is very high. Do you know if there are any problems with the process that balances our accounts?
Is anybody else seeing the same issue?
FYI: This issue resolved its-self in the end about 24 hours after I reported the issue. The problem has not occurred again since the report. I suspect a process got stuck and was restarted.
August 08, 2016, 04:33:45 AM
Hello i got problems with the minergate gui 64 bit everytime i open it says crash-report.exe
has stopped working even im running on 64 bit system
i got no problems with the 32 bit versions
has stopped working even im running on 64 bit system
i got no problems with the 32 bit versions
August 03, 2016, 01:07:08 AM
Hi Nopedope,
I notice that my unconfirmed balance for BCN is very high. Do you know if there are any problems with the process that balances our accounts?
Is anybody else seeing the same issue?
I notice that my unconfirmed balance for BCN is very high. Do you know if there are any problems with the process that balances our accounts?
Is anybody else seeing the same issue?
July 31, 2016, 11:32:16 AM
It is very expensive to withdraw from your platform. Very high fees. Not worth it?
July 29, 2016, 05:07:08 AM
1 click miner is too buggy on Win 8.1 64 bit - GTX 1070
July 26, 2016, 01:37:47 PM
MinerGate adds support for Ethereum Classic mining! [0% fee!]
Please enjoy mining ETC on our pool!
- 1-click GUI miner. Download our GUI miner and start mining ETC in minutes!
Download link: https://minergate.com/donwloads/gui
GUI miner guide: https://minergate.com/blog/brief-minergate-gui-miner-guide/ - Ethminer supported! Settings:
For CPU mining:
ethminer -C -F http://eth.pool.minergate.com:51777/YOUR_EMAIL –disable-submit-hashrate
For GPU mining:
ethminer -G -F http://eth.pool.minergate.com:51777/YOUR_EMAIL –disable-submit-hashrate
Detailed instructions: https://minergate.com/faq/how-to-mine-eth-classic-with-console - Genoil miner supported! Settings:
Open CL:
ethminer -G -S eth.pool.minergate.com:45777 -O YOUR_EMAIL
CUDA:
ethminer -U -S eth.pool.minergate.com:45777 -O YOUR_EMAIL
Detailed instructions: https://minergate.com/faq/how-to-mine-eth-classic-with-console
More info:
Website: https://minergate.com
Support: https://minergate.com/support
Blog post: https://minergate.com/blog/v-6-4-ethereum-classic-etc-mining/
Awesome news nopedope89, I'll give ETC a whirl once I finish my current mining targets (and thanks for posting the update information on here - its very much appreciated)
July 26, 2016, 12:25:12 PM
Nice to see you are going to be adding in the AMD support at some point this week. Already using though ethminer. Just one question regarding share submitting to pool. Why so many shares being submitted in less than 5 min submitted over 200+ with only 20MH running and looking at it was submitting shares every half sec or little longer. Is this based on difficulty that is set on pool? If so might want to have a variable one based on hash speed.
Well, actually our pool provides variable difficulty, which is exactly the reason you're submitting so many shares. The pool provides you the hashrate, based on your hardware, in order to let you submit shares constantly (which at first may look odd for GPU miners that are used to constant difficulty on other pools).
Our variable difficulty is mainly designed for those, who have lesser mining power (e.g. CPU-miners), but still want to mine Ethereum. In the case of our pool, CPU-miners can submit shares in each block, because the pool provides them with lower hashrate and lets them submit shares and make profit.
And also a problem I have come across on pool is that mining with say 70MH pool never seen more than 45 to 48MH at most. Any idea as to what the cause of this is? Reason I ask this is other pools are fine or very little between actual mining power and pool report.
I guess you are talking about the difference between your hashrate that you see in the miner and your hashrate, displayed on the account dashboard on the website.
The reason for this difference is that the dashboard hashrate is based on the shares that you submitted, while the miner shows the hashrate, based on your hardware. They simply use different formulas, so it doesn't affect your efficiency in any way and the pool uses your hardware completely.
"Our variable difficulty is mainly designed for those, who have lesser mining power (e.g. CPU-miners), but still want to mine Ethereum. In the case of our pool, CPU-miners can submit shares in each block, because the pool provides them with lower hashrate and lets them submit shares and make profit."
I was thinking about ordering 6 graphics cards, a rig and using your software but then I found this =(
Is it still possible to use your software and pool with 150 MH/s rig? If not would you be interested in setting up a special port for high MH/s rigs?
[/quote]
Hi there!
Please send your .log files to our support team! [email protected]
[/quote]
Done =)
July 26, 2016, 11:34:02 AM
I'm only getting 4 MH/s with a 970 mining ETH on Windows 10. I've tried several drivers including 347.52 which everyone swears by, but it doesn't work with Minergate for me. GPU isn't available to mine with when using that driver. I should be getting at least 10 MH/s. Does anyone know if it's a problem with Windows 10 or do I need a certain driver that I haven't tried? If anyone can help me I'll give you some BTC.
Hi there!
Have you contacted our support team? Please submit your ticket here: https://minergate.com/support
You can try to change your GPU settings for OpenCL, but you should be careful: https://forum.minergate.com/viewtopic.php?f=9&p=3913#p3913
Hi,
I Just picked up a copy of minergate, seems like a nice piece of software but I'm having a similar problem with Windows 10, I believe. I'm running a 980ti only getting 3.5 MH/s mining ETH. I have also tried that driver but my computer does not accept it and I can not install it at all. It just says no compatible Hardware found.
I've tried asking in chat in minergate with no luck and I've done research for hours online and still no luck=(
Thankfully I found this thread=)
Hi there!
Please send your .log files to our support team! [email protected]
July 26, 2016, 11:31:59 AM
MinerGate adds support for Ethereum Classic mining! [0% fee!]
Please enjoy mining ETC on our pool!
- 1-click GUI miner. Download our GUI miner and start mining ETC in minutes!
Download link: https://minergate.com/donwloads/gui
GUI miner guide: https://minergate.com/blog/brief-minergate-gui-miner-guide/ - Ethminer supported! Settings:
For CPU mining:
ethminer -C -F http://eth.pool.minergate.com:51777/YOUR_EMAIL –disable-submit-hashrate
For GPU mining:
ethminer -G -F http://eth.pool.minergate.com:51777/YOUR_EMAIL –disable-submit-hashrate
Detailed instructions: https://minergate.com/faq/how-to-mine-eth-classic-with-console - Genoil miner supported! Settings:
Open CL:
ethminer -G -S eth.pool.minergate.com:45777 -O YOUR_EMAIL
CUDA:
ethminer -U -S eth.pool.minergate.com:45777 -O YOUR_EMAIL
Detailed instructions: https://minergate.com/faq/how-to-mine-eth-classic-with-console
More info:
Website: https://minergate.com
Support: https://minergate.com/support
Blog post: https://minergate.com/blog/v-6-4-ethereum-classic-etc-mining/
July 26, 2016, 05:39:43 AM
I'm only getting 4 MH/s with a 970 mining ETH on Windows 10. I've tried several drivers including 347.52 which everyone swears by, but it doesn't work with Minergate for me. GPU isn't available to mine with when using that driver. I should be getting at least 10 MH/s. Does anyone know if it's a problem with Windows 10 or do I need a certain driver that I haven't tried? If anyone can help me I'll give you some BTC.
Hi there!
Have you contacted our support team? Please submit your ticket here: https://minergate.com/support
You can try to change your GPU settings for OpenCL, but you should be careful: https://forum.minergate.com/viewtopic.php?f=9&p=3913#p3913
Hi,
I Just picked up a copy of minergate, seems like a nice piece of software but I'm having a similar problem with Windows 10, I believe. I'm running a 980ti only getting 3.5 MH/s mining ETH. I have also tried that driver but my computer does not accept it and I can not install it at all. It just says no compatible Hardware found.
I've tried asking in chat in minergate with no luck and I've done research for hours online and still no luck=(
Thankfully I found this thread=)
July 25, 2016, 09:21:42 AM
Ubuntu version doesn't support GTX 1070 or am i missing something 
July 25, 2016, 05:13:27 AM
I see there is a new version out. What are the changes? Anything to do with the ETH hard fork? would be interesting to know. Can't see anything on the blog or site.
Strange, It looks like the new download file is also called Minergate-6.3-win64 and loads a version also called 6.3. Is that correct? If so, that is a strange release procedure. July 25, 2016, 05:09:56 AM
I see there is a new version out. What are the changes? Anything to do with the ETH hard fork? would be interesting to know. Can't see anything on the blog or site.
July 24, 2016, 06:48:30 AM
Help everytime i open minergate.exe (latest version)
it shows this
it shows this
July 23, 2016, 03:23:49 AM
Why my DSH dont send on my account poloniex ?
.
.
Anyone to help ? .
Hello,
You most likely already checked this, but did you setup the payment id and address correctly, that caught me out one time =)
Otherwise could be that the blockchain is not moving quickly as its not a very popular coin. You could try downloading the wallet to help the coin out a little
July 22, 2016, 07:38:28 AM
Why my DSH dont send on my account poloniex ?
.
.
Anyone to help ? .
July 19, 2016, 05:17:57 AM
Why my DSH dont send on my account poloniex ?
.
.
Jump to: