Topic: Ⓜ️ minerstat - mining monitor and management (mining OS, Windows, ASIC) - page 110. (Read 167182 times)
June 05, 2017, 06:41:54 AM
I cannot login anymore. If I enter my passkey and click login, it will redirect me to the homepage without logging in.
June 04, 2017, 06:57:41 AM
Minerstat API is updated!
- New PHP Example.
- Updated JSON.
Current rate: 2 request / 1 IP / 1 sec (Will be higher)
https://github.com/coinscrow/minerstat-api
Upcoming:
- Revenue Chart
- Hashrate Down Notification
- Improved Hashrate Chart (H, KH, MH, GH view)
- New PHP Example.
- Updated JSON.
Current rate: 2 request / 1 IP / 1 sec (Will be higher)
https://github.com/coinscrow/minerstat-api
Upcoming:
- Revenue Chart
- Hashrate Down Notification
- Improved Hashrate Chart (H, KH, MH, GH view)
June 04, 2017, 02:01:29 AM
I Lost my workers with my api is this normal?
https://minerstat.com/api/getstat/ACCESSKEY
Rate Limit on the Api: 3 request / 1 minute.
The API will improved in the upcoming days, more detailed informations about rigs.
Examples will be here:
https://github.com/coinscrow/minerstat-api/
i dont know what you think
June 03, 2017, 09:07:41 PM
I Lost my workers with my api is this normal?
https://minerstat.com/api/getstat/ACCESSKEY
Rate Limit on the Api: 3 request / 1 minute.
The API will improved in the upcoming days, more detailed informations about rigs.
Examples will be here:
https://github.com/coinscrow/minerstat-api/
June 03, 2017, 07:32:28 PM
I Lost my workers with my api is this normal?
https://minerstat.com/api/getstat/ACCESSKEY
Rate Limit on the Api: 3 request / 1 minute.
The API will improved in the upcoming days, more detailed informations about rigs.
Examples will be here:
https://github.com/coinscrow/minerstat-api/
June 03, 2017, 07:23:23 PM
I Lost my workers with my api is this normal?
June 03, 2017, 04:55:05 PM
update done, but still can't get it working.
node version 2.9.1.0 but first says that no wattool configs found, but i have them.
took a look in claymore-eth config file and there is no pools, no wallets etc. listed.
node version 2.9.1.0 but first says that no wattool configs found, but i have them.
took a look in claymore-eth config file and there is no pools, no wallets etc. listed.
Thank you for your report, it was a server side mistake. Now will work
Only 7 gpu in stat.
Need more, 9 will be nice.
Need more, 9 will be nice.
I will upgrade to 13+ GPU support, because the new Ascrock motherboard will support it
Still having problems with new rigs not showing up in the config editor
Fixed. Also, i'll improve the new rigs. The new config addresses will auto loaded from the the address editor, not need to change my addresses just, working with yours. I will write a post about if its ready.
June 03, 2017, 04:29:25 PM
update done, but still can't get it working.
node version 2.9.1.0 but first says that no wattool configs found, but i have them.
took a look in claymore-eth config file and there is no pools, no wallets etc. listed.
node version 2.9.1.0 but first says that no wattool configs found, but i have them.
took a look in claymore-eth config file and there is no pools, no wallets etc. listed.
Thank you for your report, it was a server side mistake. Now will work
Only 7 gpu in stat.
Need more, 9 will be nice.
Need more, 9 will be nice.
I will upgrade to 13+ GPU support, because the new Ascrock motherboard will support it
Still having problems with new rigs not showing up in the config editor
June 03, 2017, 01:44:15 PM
update done, but still can't get it working.
node version 2.9.1.0 but first says that no wattool configs found, but i have them.
took a look in claymore-eth config file and there is no pools, no wallets etc. listed.
node version 2.9.1.0 but first says that no wattool configs found, but i have them.
took a look in claymore-eth config file and there is no pools, no wallets etc. listed.
Thank you for your report, it was a server side mistake. Now will work
Only 7 gpu in stat.
Need more, 9 will be nice.
Need more, 9 will be nice.
I will upgrade to 13+ GPU support, because the new Ascrock motherboard will support it
June 03, 2017, 01:36:33 PM
Quote
And now this file is the config in the claymore folder;
-eworker Rig5
-epool
-ewal
-epsw x
-dpool
-dcoin
-dwal
-dpsw x
-mode 0
-dcri
-cvddc 900
-mclock 1950
-fanmin 80
-allcoins 1
See?? Only the eworker gets pulled into the file. Any other info is not there.
Have same problem, claymore-eth config has no values. -eworker Rig5
-epool
-ewal
-epsw x
-dpool
-dcoin
-dwal
-dpsw x
-mode 0
-dcri
-cvddc 900
-mclock 1950
-fanmin 80
-allcoins 1
See?? Only the eworker gets pulled into the file. Any other info is not there.
June 03, 2017, 01:32:43 PM
Only 7 gpu in stat.
Need more, 9 will be nice.
Need more, 9 will be nice.
June 03, 2017, 01:30:42 PM
Am I the only one were the pool / wallet info does not end up in the claymore config file? It is like the "( )" tags are not working. 
Doesn't work for me too.
config.txt have no values.
yes, thats i wrote upper. I you need to use this or autoupdate.
https://github.com/coinscrow/minerstat-windows/releases/tag/2.9.1.0
the config.txt not downloaded from the server, this in the package, the autoupdate create a backup file than replace.
The 2.9.0.1 rewrote the backup file to dump. Thats will be good
No you misunderstand. It does get the file but everything in the file is empty.
This is my config setting in the portal now;
-eworker (WORKER)
-epool exp-eu.dwarfpool.com:8018
-ewal 0x3ec1c5c390f8a63b852f85f79e7e2354a4d92a79
-epsw x
-dpool eu.siamining.com:7777
-dcoin SC
-dwal 00ee4e3d423fcb4bc7c5335e653a97dcd2599b9df2ceabbd11b9d4f3168a2818bc63de483668
-dpsw x
-mode 0
-dcri 19
-cvddc 900
-mclock 1950
-fanmin 80
-allcoins 1
And this is the config file the node downloads;
-eworker Rig5
-epool exp-eu.dwarfpool.com:8018
-ewal 0x3ec1c5c390f8a63b852f85f79e7e2354a4d92a79
-epsw x
-dpool eu.siamining.com:7777
-dcoin SC
-dwal 00ee4e3d423fcb4bc7c5335e653a97dcd2599b9df2ceabbd11b9d4f3168a2818bc63de483668
-dpsw x
-mode 0
-dcri 19
-cvddc 900
-mclock 1950
-fanmin 80
-allcoins 1
So all seems good.
Now I Set it all back to default. So my portal settings look like this;
-eworker (WORKER)
-epool (1_COIN_POOL)
-ewal (1_COIN_ADDRESS)
-epsw x
-dpool (2_COIN_POOL)
-dcoin (2_COIN)
-dwal (2_COIN_ADDRESS)
-dpsw x
-mode 0
-dcri (DCRI)
-cvddc 900
-mclock 1950
-fanmin 80
-allcoins 1
And now this file is the config in the claymore folder;
-eworker Rig5
-epool
-ewal
-epsw x
-dpool
-dcoin
-dwal
-dpsw x
-mode 0
-dcri
-cvddc 900
-mclock 1950
-fanmin 80
-allcoins 1
See?? Only the eworker gets pulled into the file. Any other info is not there.
June 03, 2017, 01:28:57 PM
update done, but still can't get it working.
node version 2.9.1.0 but first says that no wattool configs found, but i have them.
took a look in claymore-eth config file and there is no pools, no wallets etc. listed.
node version 2.9.1.0 but first says that no wattool configs found, but i have them.
took a look in claymore-eth config file and there is no pools, no wallets etc. listed.
June 03, 2017, 01:07:23 PM
How about letting people run their own private severs? Attacks will always happen esp in this industry.
Is this mainly node.js? If so it would be easy to get this up and running on heroku with Postgres or gcloud as a docker images. If your using LAMP I would suggest moving to LEMP , nginx can handle a lot more data and is much more efficient than apache if configured properly ..
Thoughts ?
Is this mainly node.js? If so it would be easy to get this up and running on heroku with Postgres or gcloud as a docker images. If your using LAMP I would suggest moving to LEMP , nginx can handle a lot more data and is much more efficient than apache if configured properly ..
Thoughts ?
maybe i need to thinking in a self hosted version. or a backup server what sync in the main server, im working on tge best solution.
i tested nginx with fpm, hard to say what better. apche with rate limiter at server and dns side can do the trick.
If you need any help I have been a sever stack and web developer/designer for almost 12 years..
If you have ideas or advices don't hesitate to tell me.
We can get in contact June 03, 2017, 01:05:51 PM
How about letting people run their own private severs? Attacks will always happen esp in this industry.
Is this mainly node.js? If so it would be easy to get this up and running on heroku with Postgres or gcloud as a docker images. If your using LAMP I would suggest moving to LEMP , nginx can handle a lot more data and is much more efficient than apache if configured properly ..
Thoughts ?
Is this mainly node.js? If so it would be easy to get this up and running on heroku with Postgres or gcloud as a docker images. If your using LAMP I would suggest moving to LEMP , nginx can handle a lot more data and is much more efficient than apache if configured properly ..
Thoughts ?
maybe i need to thinking in a self hosted version. or a backup server what sync in the main server, im working on tge best solution.
i tested nginx with fpm, hard to say what better. apche with rate limiter at server and dns side can do the trick.
If you need any help I have been a sever stack and web developer/designer for almost 12 years..
June 03, 2017, 01:00:35 PM
How about letting people run their own private severs? Attacks will always happen esp in this industry.
Is this mainly node.js? If so it would be easy to get this up and running on heroku with Postgres or gcloud as a docker images. If your using LAMP I would suggest moving to LEMP , nginx can handle a lot more data and is much more efficient than apache if configured properly ..
Thoughts ?
Is this mainly node.js? If so it would be easy to get this up and running on heroku with Postgres or gcloud as a docker images. If your using LAMP I would suggest moving to LEMP , nginx can handle a lot more data and is much more efficient than apache if configured properly ..
Thoughts ?
maybe i need to thinking in a self hosted version. or a backup server what sync in the main server, im working on tge best solution.
i tested nginx with fpm, hard to say what better. apche with rate limiter at server and dns side can do the trick.
June 03, 2017, 12:48:25 PM
How about letting people run their own private severs? Attacks will always happen esp in this industry.
Is this mainly node.js? If so it would be easy to get this up and running on heroku with Postgres or gcloud as a docker images. If your using LAMP I would suggest moving to LEMP , nginx can handle a lot more data and is much more efficient than apache if configured properly ..
Thoughts ?
Is this mainly node.js? If so it would be easy to get this up and running on heroku with Postgres or gcloud as a docker images. If your using LAMP I would suggest moving to LEMP , nginx can handle a lot more data and is much more efficient than apache if configured properly ..
Thoughts ?
June 03, 2017, 12:43:49 PM
Am I the only one were the pool / wallet info does not end up in the claymore config file? It is like the "( )" tags are not working.
Doesn't work for me too.
config.txt have no values.
yes, thats i wrote upper. I you need to use this or autoupdate.
https://github.com/coinscrow/minerstat-windows/releases/tag/2.9.1.0
the config.txt not downloaded from the server, this in the package, the autoupdate create a backup file than replace.
The 2.9.0.1 rewrote the backup file to dump. Thats will be good
June 03, 2017, 12:04:11 PM
Am I the only one were the pool / wallet info does not end up in the claymore config file? It is like the "( )" tags are not working.
Doesn't work for me too.
config.txt have no values.
June 03, 2017, 11:38:06 AM
GOT IT TO WORK NOW JUST UPDATED TO 2.9.1.0!
Jump to: