Topic: Ⓜ️ minerstat - mining monitor and management (mining OS, Windows, ASIC) - page 118. (Read 167287 times)

amazing tool! I am happy especially with linux 

Thanks

Sorry man, I lack the knowledge of and experience with linux to help you out on this one.

Yep, just PM me a link. Preferably one I can wget the archive from.

not released yet. i said before release.
so its in my computer only, but i can send to you

I will give it a try tonight when I reload one of my troublesome Windows rigs to Linux.

Problem though, there really isn't much in that repo...

Someone can me help with "Linux Client" Testing, Before Release?
Write me a message if you are interested..

When you query/open http://127.0.0.1:3333
miner generate statistics, thats why this show up. no effect on performance or on mining..  just few additional lines to the console

Thanks for your reply

I added -mode 1, but it keeps saying 'Pool Switches ETH - DECR':

ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
ETH: eth-proxy stratum mode
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333

ETH: Authorized
Setting DAG epoch #123...
ETH: 05/16/17-14:40:03 - New job from eu.alpereum.ch:3002
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s
ETH: 05/16/17-14:40:04 - New job from eu.alpereum.ch:3002
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s
Setting DAG epoch #123 for GPU3
Create GPU buffer for GPU3
Setting DAG epoch #123 for GPU0
Create GPU buffer for GPU0
Setting DAG epoch #123 for GPU2
Create GPU buffer for GPU2
Setting DAG epoch #123 for GPU1
Create GPU buffer for GPU1
GPU2 DAG creation time - 4455 ms
Setting DAG epoch #123 for GPU2 done
GPU1 DAG creation time - 4450 ms
Setting DAG epoch #123 for GPU1 done
GPU3 DAG creation time - 4466 ms
Setting DAG epoch #123 for GPU3 done
GPU0 DAG creation time - 4477 ms
Setting DAG epoch #123 for GPU0 done
ETH: 05/16/17-14:40:14 - SHARE FOUND - (GPU 3)
ETH: Share accepted (109 ms)!
ETH: 05/16/17-14:40:17 - New job from eu.alpereum.ch:3002
ETH - Total Speed: 108.536 Mh/s, Total Shares: 1, Rejected: 0, Time: 00:00
ETH: GPU0 27.112 Mh/s, GPU1 27.147 Mh/s, GPU2 27.138 Mh/s, GPU3 27.139 Mh/s
ETH: 05/16/17-14:40:19 - SHARE FOUND - (GPU 2)
ETH: Share accepted (156 ms)!
ETH: 05/16/17-14:40:27 - SHARE FOUND - (GPU 1)
ETH: Share accepted (203 ms)!
ETH: 05/16/17-14:40:30 - New job from eu.alpereum.ch:3002
ETH - Total Speed: 108.527 Mh/s, Total Shares: 3, Rejected: 0, Time: 00:00
ETH: GPU0 27.113 Mh/s, GPU1 27.146 Mh/s, GPU2 27.131 Mh/s, GPU3 27.138 Mh/s
ETH: 05/16/17-14:40:31 - New job from eu.alpereum.ch:3002
ETH - Total Speed: 108.525 Mh/s, Total Shares: 3, Rejected: 0, Time: 00:00
ETH: GPU0 27.110 Mh/s, GPU1 27.138 Mh/s, GPU2 27.129 Mh/s, GPU3 27.150 Mh/s
ETH: 05/16/17-14:40:33 - SHARE FOUND - (GPU 0)
ETH: Share accepted (203 ms)!
GPU0 t=55C fan=99%, GPU1 t=45C fan=98%, GPU2 t=49C fan=100%, GPU3 t=46C fan=100%
ETH: 05/16/17-14:40:35 - SHARE FOUND - (GPU 2)
ETH: Share accepted (32 ms)!
ETH: 05/16/17-14:40:40 - New job from eu.alpereum.ch:3002
ETH - Total Speed: 108.337 Mh/s, Total Shares: 5, Rejected: 0, Time: 00:00
ETH: GPU0 27.052 Mh/s, GPU1 27.097 Mh/s, GPU2 27.080 Mh/s, GPU3 27.109 Mh/s
ETH: 05/16/17-14:40:40 - New job from eu.alpereum.ch:3002
ETH - Total Speed: 108.350 Mh/s, Total Shares: 5, Rejected: 0, Time: 00:00
ETH: GPU0 27.043 Mh/s, GPU1 27.102 Mh/s, GPU2 27.096 Mh/s, GPU3 27.109 Mh/s
GPU0 t=57C fan=99%, GPU1 t=47C fan=98%, GPU2 t=52C fan=100%, GPU3 t=49C fan=100%
ETH: 05/16/17-14:41:26 - New job from eu.alpereum.ch:3002
ETH - Total Speed: 108.115 Mh/s, Total Shares: 5, Rejected: 0, Time: 00:01
ETH: GPU0 26.946 Mh/s, GPU1 27.081 Mh/s, GPU2 27.074 Mh/s, GPU3 27.015 Mh/s
ETH: 05/16/17-14:41:26 - New job from eu.alpereum.ch:3002
ETH - Total Speed: 107.048 Mh/s, Total Shares: 5, Rejected: 0, Time: 00:01
ETH: GPU0 25.765 Mh/s, GPU1 27.098 Mh/s, GPU2 27.063 Mh/s, GPU3 27.121 Mh/s

GPU #0: Ellesmere, 4096 MB available, 32 compute units
GPU #1: Ellesmere, 4096 MB available, 32 compute units
GPU #2: Ellesmere, 4096 MB available, 32 compute units
GPU #3: Ellesmere, 4096 MB available, 32 compute units
ETH - Total Speed: 108.362 Mh/s, Total Shares: 5, Rejected: 0, Time: 00:01
ETH: GPU0 27.062 Mh/s, GPU1 27.125 Mh/s, GPU2 27.079 Mh/s, GPU3 27.096 Mh/s
Incorrect ETH shares: none
Pool switches: ETH - 0, DCR - 0
Current ETH share target: 0x0000000225c17d04 (diff: 2000MH), epoch #123
GPU0 t=58C fan=99%, GPU1 t=49C fan=98%, GPU2 t=53C fan=100%, GPU3 t=50C fan=100%


Many thanks for your reply! Ok, I will wait

1) Telegram server was crashed, thanks for saying it. (I restarted, now will work fine)
2) Advanced alerts will coming soon.
3) You need to enable store cookies in your phone.
4) Yes, it possible. Comes with the Beta mobile app, the current is only an Alpha version Mobile App.

#4 Would be an awesome update!

#5 Change "-mode 0" to "-mode 1" inside the miner config.  That should take care of it.  

Many thanks for this amazing tool! Documentation could be a bit better for newbies, but it's self explanatory once you start using it. Here's my feedback:

1. Telegram alerts are not working. I've started a chat with the bot and entered the API key. The bot ackowledges the key and says to enable Telegram alerts on the website, which I did. But when my miner goes down, no alert is sent via Telegram. Email alerts however are working well.

2. You only receive an alert when your miner is down, but not when it's back up.

3. Is it possible for the Android app to remember my API key? Every time I start the app I need to re-enter my API key.

4. Is it possible to implement push alerts into the Android app, similar to email and Telegram alerts?

5. My miner keeps saying 'Pool switches: ETH - 0, DCR - 0' even though I selected claymore-eth as miner in the config.txt. Why is that? I do not want to dualmine.

Many thanks!

https://github.com/coinscrow/minerstat-linux/

Linux client will be here in this week.
Everything works good, i will add few more clients and do more testing on it.
ETA: Thursday

i develop the node under ubuntu.
but, i think it will work in all distro.

claymore-dual, claymore-zec. ewbf-zec already work on linux.
what clients are you using?

If the linux client is ready next week, what linux distro do we need to install to best test, I would like to get away from smOS by the time you release alpha client

Linux Client Alpha, Next week!

This is not the OS, yet. >> Client like minerstat.com on windows.

 

thank you

no.
just configure watttool, not needed to temove wattman

Its for rx 400 series but if I want to use watttoll should I remove wattman so there's not two programs trying to control my gpus win 10 installed it automically

not needed.
watttool for only RX 400 Series. currently 500 not supported.. (yet)

I should uninstall wattman to use wattool