Ⓜ️ minerstat - mining monitor and management (mining OS, Windows, ASIC) - page 114.

insaniak

full member

Activity: 137

Merit: 100

Quote from: magnoman on May 26, 2017, 03:18:53 PM

Quote from: insaniak on May 25, 2017, 10:49:35 PM

Coinscrow, do you know why when node is fetching data and syncing there is drop in hash rate?

I haven't noticed any appreciable difference in the hash rate while the Minerstat is syncing on my rigs. I've used most all of the miners.

Can you give more specifics?

- Which miner(s) are exhibiting this behavior?
- How much is the hash rate dropping?
- What GPU(s) and CPU do you have?
- Are you CPU mining as well?
- Windows version?

If we can replicate the issue then perhaps we can help find a cause and solution.

Eth only miner I get 30-31 mh/s and once it starts syncing my gpu 2 drops to 28 mh/s then when it's done syncing goes back up to 30-31. Running 6 gpus.
Rx 580s 8gbs CPU intel 3900 I think? The one that works with z170a
Not CPU mining
4gb ram
Windows 10 64 bit

magnoman

newbie

Activity: 33

Merit: 0

Quote from: insaniak on May 25, 2017, 10:49:35 PM

Coinscrow, do you know why when node is fetching data and syncing there is drop in hash rate?

I haven't noticed any appreciable difference in the hash rate while the Minerstat is syncing on my rigs. I've used most all of the miners.

Can you give more specifics?

- Which miner(s) are exhibiting this behavior?
- How much is the hash rate dropping?
- What GPU(s) and CPU do you have?
- Are you CPU mining as well?
- Windows version?

If we can replicate the issue then perhaps we can help find a cause and solution.

insaniak

full member

Activity: 137

Merit: 100

Coinscrow, do you know why when node is fetching data and syncing there is drop in hash rate?

Herdirfauzi

sr. member

Activity: 574

Merit: 250

I will try tonight on Android, thank you very much Cheesy

SoeLak

newbie

Activity: 11

Merit: 0

Quote from: Bones972 on May 25, 2017, 07:56:16 AM

Quote from: coinscrow on May 25, 2017, 04:31:32 AM

Quote from: Bones972 on May 25, 2017, 02:41:25 AM

@Coincrow
Man you are doing an amazing job! This program is Awesome. I love that I can change all my rigs coin algro's around so quick and easy. The improvements you are making on your own and with some of our suggestions are incredible! Really loving the new Revenue/Rig update

Any word on updating the new Claymore miners?
Keep up the good work!!
Bones972

i update the v2.9 package with new
claymore-zec, claymore-eth and final version of ccminer. (Later today.. I will update this post when i updated)

but everyone can easily update the clients. EXAMPLE:
clients/claymore-zec -> delete all of contents
after put all of new files what you downloaded from claymore. thats all

Sweet! I did not know I could do that!
I am still learning all the in's and out's of this program.
Thanks!!

delete all of contents except "start.bat"

Bones972

full member

Activity: 198

Merit: 101

Quote from: coinscrow on May 25, 2017, 04:31:32 AM

Quote from: Bones972 on May 25, 2017, 02:41:25 AM

@Coincrow
Man you are doing an amazing job! This program is Awesome. I love that I can change all my rigs coin algro's around so quick and easy. The improvements you are making on your own and with some of our suggestions are incredible! Really loving the new Revenue/Rig update

Any word on updating the new Claymore miners?
Keep up the good work!!
Bones972

i update the v2.9 package with new
claymore-zec, claymore-eth and final version of ccminer. (Later today.. I will update this post when i updated)

but everyone can easily update the clients. EXAMPLE:
clients/claymore-zec -> delete all of contents
after put all of new files what you downloaded from claymore. thats all

Sweet! I did not know I could do that!
I am still learning all the in's and out's of this program.
Thanks!!

coinscrow

sr. member

Activity: 1596

Merit: 305

minerstat CEO

Quote from: Bones972 on May 25, 2017, 02:41:25 AM

@Coincrow
Man you are doing an amazing job! This program is Awesome. I love that I can change all my rigs coin algro's around so quick and easy. The improvements you are making on your own and with some of our suggestions are incredible! Really loving the new Revenue/Rig update

Any word on updating the new Claymore miners?
Keep up the good work!!
Bones972

i update the v2.9 package with new
claymore-zec, claymore-eth and final version of ccminer. (Later today.. I will update this post when i updated)

but everyone can easily update the clients. EXAMPLE:
clients/claymore-zec -> delete all of contents
after put all of new files what you downloaded from claymore. thats all

Bones972

full member

Activity: 198

Merit: 101

@Coincrow
Man you are doing an amazing job! This program is Awesome. I love that I can change all my rigs coin algro's around so quick and easy. The improvements you are making on your own and with some of our suggestions are incredible! Really loving the new Revenue/Rig update

Any word on updating the new Claymore miners?
Keep up the good work!!
Bones972

cryptominer420

sr. member

Activity: 450

Merit: 255

Also New Dual Miner.

Bones972

full member

Activity: 198

Merit: 101

@Coincrow Did you see that Claymore just released

ZCash miner V12.5

- added support for latest ZCash forks.
- improved fans management for latest drivers and Polaris cards.
- added "-mpsw" option.
- added shares-per-GPU statistics when "s" key is pressed.
- Included EthMan v3.0 which supports passwords and email notifications

They just delayed ZEN for 7 days... Not released till the 31st now.

FRK

newbie

Activity: 15

Merit: 0

Quote from: coinscrow on May 22, 2017, 07:36:51 PM

i missed that. Grin

i wrote aperum instead of alpereum
now will work.

Thanks, it works Cheesy

insaniak

full member

Activity: 137

Merit: 100

Thank you got it working. One thing I noticed is that when ever node fetches data and updates the status. I get a drop in hashrate from one of my GPUS. Is this normal?

coinscrow

sr. member

Activity: 1596

Merit: 305

minerstat CEO

Quote from: insaniak on May 23, 2017, 11:47:27 AM

I'm having issues trying to mine eth. In settings on update I update claymore dual configs to my settings. I change all the settings in the config file for node. node miner says ClayMore Dual log file doesn't excist

MINER = claymore-eth

in config.txt

insaniak

full member

Activity: 137

Merit: 100

I'm having issues trying to mine eth. In settings on update I update claymore dual configs to my settings. I change all the settings in the config file for node. node miner says ClayMore Dual log file doesn't excist

coinscrow

sr. member

Activity: 1596

Merit: 305

minerstat CEO

Quote from: Bones972 on May 23, 2017, 10:06:55 AM

Quote from: coinscrow on May 23, 2017, 09:51:52 AM

Quote from: Bones972 on May 23, 2017, 07:22:42 AM

I think it need to recognise, if not write me a Private Message and we solve it

I just tried pointing it to Zcash and received some error but the window closes too fast for me to read the error?
ccminer-80-x64 -a equihash -o stratum+tcp://zec.suprnova.cc:4142 -u Bones972.Athena -p x -b 0.0.0.0:3333 --api-bind 3333 --api-remote

edit start.bat file in ccminer folder.
put a pause in a new line. after save it. you will see the error.

i don't see equihash support for ccminer

Code:

This is a CUDA accelerated mining application which handle :

Decred (Blake256 14-rounds - 180 bytes)
HeavyCoin & MjollnirCoin
FugueCoin
GroestlCoin & Myriad-Groestl
Lbry Credits
JackpotCoin
QuarkCoin family & AnimeCoin
TalkCoin
DarkCoin and other X11 coins
Chaincoin and Flaxscript (C11)
Saffroncoin blake (256 14-rounds)
BlakeCoin (256 8-rounds)
Qubit (Digibyte, ...)
Luffa (Joincoin)
Keccak (Maxcoin)
Pentablake (Blake 512 x5)
1Coin Triple S
Neoscrypt (FeatherCoin)
Revolver (X11evo)
Scrypt and Scrypt:N
Scrypt-Jane (Chacha)
Sibcoin (sib)
Skein (Skein + SHA)
Woodcoin (Double Skein)
Vanilla (Blake256 8-rounds - double sha256)
Vertcoin Lyra2RE
Ziftrcoin (ZR5)
Boolberry (Wild Keccak)
Monero (Cryptonight)
Aeon (Cryptonight-lite)

Hmmm ok maybe its not supported then. Suprnova has a config file listed on their website for it though?
https://zen.suprnova.cc/index.php?page=gettingstarted

I tried putting a --pause line in and it still closes too fast? I can only read "unknown alg" so I am assuming it is not a supported algo in that miner. I guess I will have to take my chances with EWBF and try to get it stable on that platform.

Thanks anyways.

I mean like:

Code:

ccminer-80-x64 -a decred -o stratum+tcp://XY:PORT -u WALLET -p x -q -b 0.0.0.0:3333 --api-bind 3333 --api-remote
pause

in config editor. ewbf will work

Bones972

full member

Activity: 198

Merit: 101

Quote from: coinscrow on May 23, 2017, 09:51:52 AM

Quote from: Bones972 on May 23, 2017, 07:22:42 AM

I think it need to recognise, if not write me a Private Message and we solve it

I just tried pointing it to Zcash and received some error but the window closes too fast for me to read the error?
ccminer-80-x64 -a equihash -o stratum+tcp://zec.suprnova.cc:4142 -u Bones972.Athena -p x -b 0.0.0.0:3333 --api-bind 3333 --api-remote

edit start.bat file in ccminer folder.
put a pause in a new line. after save it. you will see the error.

i don't see equihash support for ccminer

Code:

This is a CUDA accelerated mining application which handle :

Decred (Blake256 14-rounds - 180 bytes)
HeavyCoin & MjollnirCoin
FugueCoin
GroestlCoin & Myriad-Groestl
Lbry Credits
JackpotCoin
QuarkCoin family & AnimeCoin
TalkCoin
DarkCoin and other X11 coins
Chaincoin and Flaxscript (C11)
Saffroncoin blake (256 14-rounds)
BlakeCoin (256 8-rounds)
Qubit (Digibyte, ...)
Luffa (Joincoin)
Keccak (Maxcoin)
Pentablake (Blake 512 x5)
1Coin Triple S
Neoscrypt (FeatherCoin)
Revolver (X11evo)
Scrypt and Scrypt:N
Scrypt-Jane (Chacha)
Sibcoin (sib)
Skein (Skein + SHA)
Woodcoin (Double Skein)
Vanilla (Blake256 8-rounds - double sha256)
Vertcoin Lyra2RE
Ziftrcoin (ZR5)
Boolberry (Wild Keccak)
Monero (Cryptonight)
Aeon (Cryptonight-lite)

Hmmm ok maybe its not supported then. Suprnova has a config file listed on their website for it though?
https://zen.suprnova.cc/index.php?page=gettingstarted

I tried putting a --pause line in and it still closes too fast? I can only read "unknown alg" so I am assuming it is not a supported algo in that miner. I guess I will have to take my chances with EWBF and try to get it stable on that platform.

Thanks anyways.

coinscrow

sr. member

Activity: 1596

Merit: 305

minerstat CEO

Quote from: Bones972 on May 23, 2017, 07:22:42 AM

I think it need to recognise, if not write me a Private Message and we solve it

I just tried pointing it to Zcash and received some error but the window closes too fast for me to read the error?
ccminer-80-x64 -a equihash -o stratum+tcp://zec.suprnova.cc:4142 -u Bones972.Athena -p x -b 0.0.0.0:3333 --api-bind 3333 --api-remote

edit start.bat file in ccminer folder.
put a pause in a new line. after save it. you will see the error.

i don't see equihash support for ccminer

Code:

This is a CUDA accelerated mining application which handle :

Decred (Blake256 14-rounds - 180 bytes)
HeavyCoin & MjollnirCoin
FugueCoin
GroestlCoin & Myriad-Groestl
Lbry Credits
JackpotCoin
QuarkCoin family & AnimeCoin
TalkCoin
DarkCoin and other X11 coins
Chaincoin and Flaxscript (C11)
Saffroncoin blake (256 14-rounds)
BlakeCoin (256 8-rounds)
Qubit (Digibyte, ...)
Luffa (Joincoin)
Keccak (Maxcoin)
Pentablake (Blake 512 x5)
1Coin Triple S
Neoscrypt (FeatherCoin)
Revolver (X11evo)
Scrypt and Scrypt:N
Scrypt-Jane (Chacha)
Sibcoin (sib)
Skein (Skein + SHA)
Woodcoin (Double Skein)
Vanilla (Blake256 8-rounds - double sha256)
Vertcoin Lyra2RE
Ziftrcoin (ZR5)
Boolberry (Wild Keccak)
Monero (Cryptonight)
Aeon (Cryptonight-lite)

Bones972

full member

Activity: 198

Merit: 101

I think it need to recognise, if not write me a Private Message and we solve it

I just tried pointing it to Zcash and received some error but the window closes too fast for me to read the error?
ccminer-80-x64 -a equihash -o stratum+tcp://zec.suprnova.cc:4142 -u Bones972.Athena -p x -b 0.0.0.0:3333 --api-bind 3333 --api-remote

coinscrow

sr. member

Activity: 1596

Merit: 305

minerstat CEO

Quote from: Jamievs on May 23, 2017, 06:56:29 AM

Quote from: Jamievs on May 21, 2017, 09:17:54 AM

Quote from: coinscrow on May 21, 2017, 07:19:55 AM

---------------------------------------------------------------------------

Website & APP Improvements:
- New coins for CCMINER: VTC, DGB, MONA, GRS
- Ewbf & CCMINER now display pool name.
- Ewbf-ZEC support: ZEC, ZCL, ZEN, ZDASH.
- The website prepared for ZENCASH. (ewbf, claymore miners)
- Some UI improvements.
- Packaged Server Code -> Faster load

Perhaps I am completely blind but where do I add hashrates / pools / wallets for these coins?

Also add Siacoin as solomining option, it is really profitable atm!

@Coinscrow: Can you clarify? Where to add pools / wallets for ZEN / VTC / etcetera

today i add new wallets and config profile editor maybe.
ZenCash starts 4AM UTC, so the site will be ready to mine.

Quote from: Bones972 on May 23, 2017, 07:00:29 AM

Great!! Thanks!!

I also just learned that Equihash can be mined with CCMiner-Tpruvots according to Suprnova.
I have had issues with EWFB being unstable so I may try that miner instead. Not sure if it will be as fast as EWFB was or not though...

@Coincrow
is Minerstat set up for mining Equihash on CCMiner-Tpruvots?

I think it need to recognise, if not write me a Private Message and we solve it Grin

Bones972

full member

Activity: 198

Merit: 101

Great!! Thanks!!

I also just learned that Equihash can be mined with CCMiner-Tpruvots according to Suprnova.
I have had issues with EWFB being unstable so I may try that miner instead. Not sure if it will be as fast as EWFB was or not though...

@Coincrow
is Minerstat set up for mining Equihash on CCMiner-Tpruvots?

Topic: Ⓜ️ minerstat - mining monitor and management (mining OS, Windows, ASIC) - page 114. (Read 167182 times)