My Flypool ZEC Address show more than 2 KH /s than usual.
Please everybody check his start.bat file. Might be someone not write my address to his address.
Topic: Ⓜ️ minerstat - mining monitor and management (mining OS, Windows, ASIC) - page 148. (Read 167227 times)
February 20, 2017, 10:42:10 AM
February 19, 2017, 02:25:29 PM
just sent you some beercoin donation, thank you and please continue good work! 
Thank you
February 19, 2017, 12:56:59 PM
just sent you some beercoin donation, thank you and please continue good work!
February 18, 2017, 08:09:56 PM
Watt Tool for RX 400 Series.. 100%
I want to make it simple.
1) Create a profile name like ZEC, XMR, TEST, or anything you want.
2) Select the created profile
3) You can set up each card config up to 7GPU.
4) After in Rig REMOTE settings, and just select what you want to use.
I want to make it simple.
1) Create a profile name like ZEC, XMR, TEST, or anything you want.
2) Select the created profile
3) You can set up each card config up to 7GPU.
4) After in Rig REMOTE settings, and just select what you want to use.
February 18, 2017, 03:18:18 PM
I found a bug in v2.1 with pascal coin. Some causes didn't start from the web or the node crashed. I'm fixed it. In the v2.2 will work.
I hope i can finish everything tomorrow... and Monday i can release the new version.
v2.2 - (20/02/2017 OR 21/02/2017)
I hope i can finish everything tomorrow... and Monday i can release the new version.
v2.2 - (20/02/2017 OR 21/02/2017)
Quote
- New supported client (ccminer tpruvot)
- New supported coins (Sia/Exp)
- New exchanges: Bittrex, Kraken, Coinbase
- New function: WattTool for AMD RX Series.
- New function: Optional DevFee, (CPU mining) [DEVFEE = YES / NO with editable cpu thread]
- New function: Watchdog (Auto restart miner [crash / no share])
- Google Authenticator (easier setup)
- Corrects an issue when Node keeps old cmds in desktop.
- Corrects an issue when Node bad calculate bytes to megabyte.
- Corrects an issue when Restart/Switch XMR - old miner didn't closed.
- Fixed all issues with Sgminer-Pasc
- Detailed message system in Node. Shows every error/info/site commands.
- Node maximum instances SET to 1.
- New supported coins (Sia/Exp)
- New exchanges: Bittrex, Kraken, Coinbase
- New function: WattTool for AMD RX Series.
- New function: Optional DevFee, (CPU mining) [DEVFEE = YES / NO with editable cpu thread]
- New function: Watchdog (Auto restart miner [crash / no share])
- Google Authenticator (easier setup)
- Corrects an issue when Node keeps old cmds in desktop.
- Corrects an issue when Node bad calculate bytes to megabyte.
- Corrects an issue when Restart/Switch XMR - old miner didn't closed.
- Fixed all issues with Sgminer-Pasc
- Detailed message system in Node. Shows every error/info/site commands.
- Node maximum instances SET to 1.
February 18, 2017, 11:42:48 AM
I have a few questions the first is I edit the config file for start.bat than I have to edit the config files in claymore and the bat files in either sgminer or optimer than click start.bat and good to go but could I use a bat file in claymore and I no the miners can be updated but if I want to can I add the sgminer that supports monero just change the folder to sgminer-xmr than add a bat with %~dp0sgminer.exe and the rest Thanks
at claymore you need to only edit the config.txt
currently only sgminer pasc supported. in the upcoming versions i will add support for all sgminer with custom directory and algo.
February 18, 2017, 11:37:28 AM
I have a few questions the first is I edit the config file for start.bat than I have to edit the config files in claymore and the bat files in either sgminer or optimer than click start.bat and good to go but could I use a bat file in claymore and I no the miners can be updated but if I want to can I add the sgminer that supports monero just change the folder to sgminer-xmr than add a bat with %~dp0sgminer.exe and the rest Thanks
at claymore you need to only edit the config.txt
currently only sgminer pasc supported. in the upcoming versions i will add support for all sgminer with custom directory and algo.
February 18, 2017, 11:31:10 AM
I have a few questions the first is I edit the config file for start.bat than I have to edit the config files in claymore and the bat files in either sgminer or optimer than click start.bat and good to go but could I use a bat file in claymore and I no the miners can be updated but if I want to can I add the sgminer that supports monero just change the folder to sgminer-xmr than add a bat with %~dp0sgminer.exe and the rest Thanks
February 18, 2017, 09:21:09 AM
@Coinscrow
idea, some "fancy" statistic page where we will have graphs with our hashrate, earning etc. in time period which user can set?
it's easier to visualize data that way
idea, some "fancy" statistic page where we will have graphs with our hashrate, earning etc. in time period which user can set?
it's easier to visualize data that way
yes i mentioned i'm currently working on a similar extended stats.
February 18, 2017, 09:17:19 AM
@Coinscrow
idea, some "fancy" statistic page where we will have graphs with our hashrate, earning etc. in time period which user can set?
it's easier to visualize data that way
idea, some "fancy" statistic page where we will have graphs with our hashrate, earning etc. in time period which user can set?
it's easier to visualize data that way
February 18, 2017, 03:23:46 AM
Bug I just noticed, You have my ID via DM.
On rig Red1 I have both a AMD and nvidia GPUS
You can see that I am really mining with my amd but it is showing the nvidia gt 620 which can't mine anything LOL.
A Fix would be to have node check the bat file to see if it is using either --gpu-platform 0 or 1 or in CM see what the -di is set to.
or a command line argument to specify amd or nvidia etc.
On rig Red1 I have both a AMD and nvidia GPUS
You can see that I am really mining with my amd but it is showing the nvidia gt 620 which can't mine anything LOL.
A Fix would be to have node check the bat file to see if it is using either --gpu-platform 0 or 1 or in CM see what the -di is set to.
or a command line argument to specify amd or nvidia etc.
I think auto show the GPU0. i can resolve this display issue when config files will be editable online. I added this to my to-do list.
v2.2 released?
No yet. I'm working on it
February 17, 2017, 10:06:25 PM
Bug I just noticed, You have my ID via DM.
On rig Red1 I have both a AMD and nvidia GPUS
You can see that I am really mining with my amd but it is showing the nvidia gt 620 which can't mine anything LOL.
A Fix would be to have node check the bat file to see if it is using either --gpu-platform 0 or 1 or in CM see what the -di is set to.
or a command line argument to specify amd or nvidia etc.
On rig Red1 I have both a AMD and nvidia GPUS
You can see that I am really mining with my amd but it is showing the nvidia gt 620 which can't mine anything LOL.
A Fix would be to have node check the bat file to see if it is using either --gpu-platform 0 or 1 or in CM see what the -di is set to.
or a command line argument to specify amd or nvidia etc.
February 17, 2017, 08:48:53 PM
v2.2 released?
February 17, 2017, 05:51:27 PM
Donated $2. Your doing great work.
Thank you!
Cant say it enough man, you rock. This tool is turning out to be a great all in 1, especially for us peeps that have nvidia
Ty, i'm on it
February 17, 2017, 04:17:54 PM
Donated $2. Your doing great work.
February 17, 2017, 03:46:12 PM
WattTool is Working !!
v2.2 Beta Progress:
v2.2 Beta Progress:
Quote
v2.2 BETA (SOON)
- New supported client (ccminer tpruvot) 80%
- New supported coins (Sia/Exp) 100%
- New exchanges: Bittrex, Kraken, Coinbase 80%
- New function: WattTool for AMD RX Series. 90%
- New function: Watchdog (Auto restart miner [crash / no share]) 100%
- Google Authenticator (easier setup) 0%
- Corrects an issue when Node keeps old cmds in desktop. 100%
- Corrects an issue when Node bad calculate bytes to megabyte. 100%
- Corrects an issue when Restart/Switch XMR - old miner didn't closed. 100%
- Detailed message system in Node. Shows every error/info/site commands. 100%
- Node maximum instances SET to 1. 100%
- New supported client (ccminer tpruvot) 80%
- New supported coins (Sia/Exp) 100%
- New exchanges: Bittrex, Kraken, Coinbase 80%
- New function: WattTool for AMD RX Series. 90%
- New function: Watchdog (Auto restart miner [crash / no share]) 100%
- Google Authenticator (easier setup) 0%
- Corrects an issue when Node keeps old cmds in desktop. 100%
- Corrects an issue when Node bad calculate bytes to megabyte. 100%
- Corrects an issue when Restart/Switch XMR - old miner didn't closed. 100%
- Detailed message system in Node. Shows every error/info/site commands. 100%
- Node maximum instances SET to 1. 100%
Cant say it enough man, you rock. This tool is turning out to be a great all in 1, especially for us peeps that have nvidia
February 17, 2017, 12:02:29 PM
WattTool is Working !!
v2.2 Beta Progress:
v2.2 Beta Progress:
Quote
v2.2 BETA (SOON)
- New supported client (ccminer tpruvot) 80%
- New supported coins (Sia/Exp) 100%
- New exchanges: Bittrex, Kraken, Coinbase 80%
- New function: WattTool for AMD RX Series. 90%
- New function: Watchdog (Auto restart miner [crash / no share]) 100%
- Google Authenticator (easier setup) 0%
- Corrects an issue when Node keeps old cmds in desktop. 100%
- Corrects an issue when Node bad calculate bytes to megabyte. 100%
- Corrects an issue when Restart/Switch XMR - old miner didn't closed. 100%
- Detailed message system in Node. Shows every error/info/site commands. 100%
- Node maximum instances SET to 1. 100%
- New supported client (ccminer tpruvot) 80%
- New supported coins (Sia/Exp) 100%
- New exchanges: Bittrex, Kraken, Coinbase 80%
- New function: WattTool for AMD RX Series. 90%
- New function: Watchdog (Auto restart miner [crash / no share]) 100%
- Google Authenticator (easier setup) 0%
- Corrects an issue when Node keeps old cmds in desktop. 100%
- Corrects an issue when Node bad calculate bytes to megabyte. 100%
- Corrects an issue when Restart/Switch XMR - old miner didn't closed. 100%
- Detailed message system in Node. Shows every error/info/site commands. 100%
- Node maximum instances SET to 1. 100%
February 17, 2017, 07:11:13 AM
WATCHDOG to everyone who donated the project with minimum $1!
- Auto START miner if crashed.
- Auto RESTART miner if running without shares. (frozed some reason?!?)
Comes with v2.2
- Auto START miner if crashed.
- Auto RESTART miner if running without shares. (frozed some reason?!?)
Comes with v2.2
February 17, 2017, 04:00:02 AM
Hey coinscrow, I have my 3rd rig setup with rx 480's using your claymore eth miner doing dual eth and dcr. On your site my eth shows correct but my dcr only seems to be showing half of what the miner in cmd says, it shows 2 gpu's for dcr but each gpu should show 420 with a total of 840.
i fixed it. It was a dual mining calculator error.
EXP coin (full) support comes in a few hour.
Site Side modification of config files.
wattman with profiles for each coin
Auto profit switching
watchdog
close miner if node is closed
if using fee based miner option to deduct the fee % in profitability calculation
as to algos basically add everything nicehash, miningpoolhub have which sgminer-gm, gateless gate, claymore, optiminer cover.
we should add a voting page to the site so that people can vote on what the next feature will be using a donation address.
wattman with profiles for each coin
Auto profit switching
watchdog
close miner if node is closed
if using fee based miner option to deduct the fee % in profitability calculation
as to algos basically add everything nicehash, miningpoolhub have which sgminer-gm, gateless gate, claymore, optiminer cover.
we should add a voting page to the site so that people can vote on what the next feature will be using a donation address.
sounds good
New miners and finish website
may i need to do this in logical order.
1) WattTool, Watchdog
2) Finish website add new miners
3) Mobile app
4) Coin Algo
February 17, 2017, 02:46:53 AM
New miners and finish website
Jump to: