[ mining os ] nvoc - page 190. | Bitcointalksearch.org

codereddew12

newbie

Activity: 36

Merit: 0

Quote from: Alienbert on October 12, 2017, 11:33:22 AM

Quote from: Alienbert on October 12, 2017, 10:48:40 AM

Quote from: papampi on October 12, 2017, 09:24:59 AM

Quote from: Alienbert on October 12, 2017, 08:57:17 AM

Quote from: damNmad on October 12, 2017, 08:07:46 AM

Quote from: Alienbert on October 12, 2017, 07:37:11 AM

Quote from: damNmad on October 12, 2017, 03:50:05 AM

Quote from: Alienbert on October 12, 2017, 01:26:22 AM

Hi!

I tried to mine Mona Coin on Lyra algo, but when the miner starts, he closes after seconds! i didint overclocked at the test.
i have 10x 1070 and 3x1060 with the new NVOC

At the Miner:

ccminer 1.8.2 for nvidia gpus........................
..................
.................

Intensity set to 21
Starting on stratum+tcp://mona.suprnova.cc:2995
NVML GPU Monotoring enable
13 miner threads started, using lyra2v2 algo
Stratum difficultly set to 1

After this, short time nothing, than screen terminated.

Have someone an idea what could it happens?

nice greets, thanks

I can confirm that your pool details are fine, make sure your worker details are set fine.

Code:

MONA_WORKER="suprnovaWorkerName"
MONA_ADDRESS="suprnovaLoginName"

May be try to reduce you intensity a bit probably?

Thanks for your answer!
The suprnovaLoginName is right, because when i try another one it writes, it cannot connect to stratum!
Is the WorkerName alone enough, or i also must write the worker pw?

now i tried with itensity 15 - same problem

I would also suggest you to try TPccminer; to do so you need to edit the below lines

Quote

if [ $COIN == "MONA" ]
then
HCD='/home/m1/SPccminer/ccminer'
ADDR="$MONA_ADDRESS.$MONA_WORKER"

to this;

Quote

if [ $COIN == "MONA" ]
then
HCD='/home/m1/TPccminer/ccminer'
ADDR="$MONA_ADDRESS.$MONA_WORKER"

Give it a shot and let me know if it worked for you.

Thanks, but the same problem.
I dont know what happens! ETH + ZEC runs great, no problems, but MONA doesnt run.

I am mining Mona with ASccminer and intensity 21 with no problem and great hash rate on suprnova
are you sure you made your worker in suprnova settings?
suprnova dont creat worker automatically , you should make them manually

Yes i created a worker!
i have something in the transactions history on suprnova from my tests, so i think the connection is not the problem
18114296 2017-10-12 08:24:09 Credit Confirmed 1131252 0.00000829

Now i looked at my sytem monitor and there are all CPUs on 100% when MONA mining starts, after few seconds screen terminated!
Could that be the problem?
Is it the same at your system?
or maybe 13 cards too much for the algo/system? How many cards do you have?

I have an i5 7600k - i dont think it has to low power

I was having the same issue you were and then I switched to the ASccminer noted by papampi above and it works great now! I am running 3 rigs with 8-10 GPUs on each rig.

Alienbert

newbie

Activity: 26

Merit: 0

Quote from: Alienbert on October 12, 2017, 10:48:40 AM

Quote from: papampi on October 12, 2017, 09:24:59 AM

Quote from: Alienbert on October 12, 2017, 08:57:17 AM

Quote from: damNmad on October 12, 2017, 08:07:46 AM

Quote from: Alienbert on October 12, 2017, 07:37:11 AM

Quote from: damNmad on October 12, 2017, 03:50:05 AM

Quote from: Alienbert on October 12, 2017, 01:26:22 AM

Hi!

I tried to mine Mona Coin on Lyra algo, but when the miner starts, he closes after seconds! i didint overclocked at the test.
i have 10x 1070 and 3x1060 with the new NVOC

At the Miner:

ccminer 1.8.2 for nvidia gpus........................
..................
.................

Intensity set to 21
Starting on stratum+tcp://mona.suprnova.cc:2995
NVML GPU Monotoring enable
13 miner threads started, using lyra2v2 algo
Stratum difficultly set to 1

After this, short time nothing, than screen terminated.

Have someone an idea what could it happens?

nice greets, thanks

I can confirm that your pool details are fine, make sure your worker details are set fine.

Code:

MONA_WORKER="suprnovaWorkerName"
MONA_ADDRESS="suprnovaLoginName"

May be try to reduce you intensity a bit probably?

Thanks for your answer!
The suprnovaLoginName is right, because when i try another one it writes, it cannot connect to stratum!
Is the WorkerName alone enough, or i also must write the worker pw?

now i tried with itensity 15 - same problem

I would also suggest you to try TPccminer; to do so you need to edit the below lines

Quote

if [ $COIN == "MONA" ]
then
HCD='/home/m1/SPccminer/ccminer'
ADDR="$MONA_ADDRESS.$MONA_WORKER"

to this;

Quote

if [ $COIN == "MONA" ]
then
HCD='/home/m1/TPccminer/ccminer'
ADDR="$MONA_ADDRESS.$MONA_WORKER"

Give it a shot and let me know if it worked for you.

Thanks, but the same problem.
I dont know what happens! ETH + ZEC runs great, no problems, but MONA doesnt run.

I am mining Mona with ASccminer and intensity 21 with no problem and great hash rate on suprnova
are you sure you made your worker in suprnova settings?
suprnova dont creat worker automatically , you should make them manually

Yes i created a worker!
i have something in the transactions history on suprnova from my tests, so i think the connection is not the problem
18114296 2017-10-12 08:24:09 Credit Confirmed 1131252 0.00000829

Now i looked at my sytem monitor and there are all CPUs on 100% when MONA mining starts, after few seconds screen terminated!
Could that be the problem?
Is it the same at your system?
or maybe 13 cards too much for the algo/system? How many cards do you have?

I have an i5 7600k - i dont think it has to low power

crazydane

full member

Activity: 558

Merit: 194

Quote from: papampi on October 12, 2017, 09:58:23 AM

WTm Auto Switch dont depend much on value, its more about dropping difficulty and the more coins you can get at that time

VERY interesting. I'll will most certainly explore this further and if that is how it works, then auto exchanging to BTC might not be the best idea.

codereddew12

newbie

Activity: 36

Merit: 0

Quote from: papampi on October 12, 2017, 09:24:59 AM

Quote from: Alienbert on October 12, 2017, 08:57:17 AM

Quote from: damNmad on October 12, 2017, 08:07:46 AM

Quote from: Alienbert on October 12, 2017, 07:37:11 AM

Quote from: damNmad on October 12, 2017, 03:50:05 AM

Quote from: Alienbert on October 12, 2017, 01:26:22 AM

Hi!

I tried to mine Mona Coin on Lyra algo, but when the miner starts, he closes after seconds! i didint overclocked at the test.
i have 10x 1070 and 3x1060 with the new NVOC

At the Miner:

ccminer 1.8.2 for nvidia gpus........................
..................
.................

Intensity set to 21
Starting on stratum+tcp://mona.suprnova.cc:2995
NVML GPU Monotoring enable
13 miner threads started, using lyra2v2 algo
Stratum difficultly set to 1

After this, short time nothing, than screen terminated.

Have someone an idea what could it happens?

nice greets, thanks

I can confirm that your pool details are fine, make sure your worker details are set fine.

Code:

MONA_WORKER="suprnovaWorkerName"
MONA_ADDRESS="suprnovaLoginName"

May be try to reduce you intensity a bit probably?

Thanks for your answer!
The suprnovaLoginName is right, because when i try another one it writes, it cannot connect to stratum!
Is the WorkerName alone enough, or i also must write the worker pw?

now i tried with itensity 15 - same problem

I would also suggest you to try TPccminer; to do so you need to edit the below lines

Quote

if [ $COIN == "MONA" ]
then
HCD='/home/m1/SPccminer/ccminer'
ADDR="$MONA_ADDRESS.$MONA_WORKER"

to this;

Quote

if [ $COIN == "MONA" ]
then
HCD='/home/m1/TPccminer/ccminer'
ADDR="$MONA_ADDRESS.$MONA_WORKER"

Give it a shot and let me know if it worked for you.

Thanks, but the same problem.
I dont know what happens! ETH + ZEC runs great, no problems, but MONA doesnt run.

I am mining Mona with ASccminer and intensity 21 with no problem and great hash rate on suprnova
are you sure you made your worker in suprnova settings?
suprnova dont creat worker automatically , you should make them manually

What's your hashrate looking like and with what GPUs?

Alienbert

newbie

Activity: 26

Merit: 0

Quote from: papampi on October 12, 2017, 09:24:59 AM

Quote from: Alienbert on October 12, 2017, 08:57:17 AM

Quote from: damNmad on October 12, 2017, 08:07:46 AM

Quote from: Alienbert on October 12, 2017, 07:37:11 AM

Quote from: damNmad on October 12, 2017, 03:50:05 AM

Quote from: Alienbert on October 12, 2017, 01:26:22 AM

Hi!

I tried to mine Mona Coin on Lyra algo, but when the miner starts, he closes after seconds! i didint overclocked at the test.
i have 10x 1070 and 3x1060 with the new NVOC

At the Miner:

ccminer 1.8.2 for nvidia gpus........................
..................
.................

Intensity set to 21
Starting on stratum+tcp://mona.suprnova.cc:2995
NVML GPU Monotoring enable
13 miner threads started, using lyra2v2 algo
Stratum difficultly set to 1

After this, short time nothing, than screen terminated.

Have someone an idea what could it happens?

nice greets, thanks

I can confirm that your pool details are fine, make sure your worker details are set fine.

Code:

MONA_WORKER="suprnovaWorkerName"
MONA_ADDRESS="suprnovaLoginName"

May be try to reduce you intensity a bit probably?

Thanks for your answer!
The suprnovaLoginName is right, because when i try another one it writes, it cannot connect to stratum!
Is the WorkerName alone enough, or i also must write the worker pw?

now i tried with itensity 15 - same problem

I would also suggest you to try TPccminer; to do so you need to edit the below lines

Quote

if [ $COIN == "MONA" ]
then
HCD='/home/m1/SPccminer/ccminer'
ADDR="$MONA_ADDRESS.$MONA_WORKER"

to this;

Quote

if [ $COIN == "MONA" ]
then
HCD='/home/m1/TPccminer/ccminer'
ADDR="$MONA_ADDRESS.$MONA_WORKER"

Give it a shot and let me know if it worked for you.

Thanks, but the same problem.
I dont know what happens! ETH + ZEC runs great, no problems, but MONA doesnt run.

I am mining Mona with ASccminer and intensity 21 with no problem and great hash rate on suprnova
are you sure you made your worker in suprnova settings?
suprnova dont creat worker automatically , you should make them manually

Yes i created a worker!
i have something in the transactions history on suprnova from my tests, so i think the connection is not the problem
18114296 2017-10-12 08:24:09 Credit Confirmed 1131252 0.00000829

gs777

member

Activity: 118

Merit: 10

Quote from: damNmad on October 12, 2017, 03:50:05 AM

Quote from: Alienbert on October 12, 2017, 01:26:22 AM

Hi!

I tried to mine Mona Coin on Lyra algo, but when the miner starts, he closes after seconds! i didint overclocked at the test.
i have 10x 1070 and 3x1060 with the new NVOC

At the Miner:

ccminer 1.8.2 for nvidia gpus........................
..................
.................

Intensity set to 21
Starting on stratum+tcp://mona.suprnova.cc:2995
NVML GPU Monotoring enable
13 miner threads started, using lyra2v2 algo
Stratum difficultly set to 1

After this, short time nothing, than screen terminated.

Have someone an idea what could it happens?

nice greets, thanks

I can confirm that your pool details are fine, make sure your worker details are set fine.

Code:

MONA_WORKER="suprnovaWorkerName"
MONA_ADDRESS="suprnovaLoginName"

May be try to reduce you intensity a bit probably?

But where I have to setup my e Wallet address?
and where to get "suprnovaLoginName"?

papampi

full member

Activity: 686

Merit: 140

Linux FOREVER! Resistance is futile!!!

Quote from: crazydane on October 12, 2017, 09:37:52 AM

General question about auto switching to most profitable coin. If you do this, don't you want some automatic mechanism to convert what you're mining into Bitcoin very frequently?

If you don't, aren't you constantly chasing coins with high difficulty and by the time you manually convert them to Bitcoin or whatever, their value may have fallen greatly?

Back when I first started, I was using NiceHash, and it did exactly that, convert to BTC more or less in realtime. But the fees with NiceHash are very high, which is why most people move on after a while.

Just trying to understand the pros and cons of auto switching and presumably hodl'ing, if you don't have time to spend on the exchanges everyday trading what you're mining, but just want to "set it and forget it".

Thanks

If you want to get BTC as soon as you can, you have 2 options,
1- use pools like MPH and set auto exchange
2- use exchanges like bittrex and set auto exchange
If you want to hold, you hold and find right time to exchange

WTm Auto Switch dont depend much on value, its more about dropping difficulty and the more coins you can get at that time
I will write a strategy guide base on my 1-2 weeks auto switch on WTM soon.

crazydane

full member

Activity: 558

Merit: 194

General question about auto switching to most profitable coin. If you do this, don't you want some automatic mechanism to convert what you're mining into Bitcoin very frequently?

If you don't, aren't you constantly chasing coins with high difficulty and by the time you manually convert them to Bitcoin or whatever, their value may have fallen greatly?

Back when I first started, I was using NiceHash, and it did exactly that, convert to BTC more or less in realtime. But the fees with NiceHash are very high, which is why most people move on after a while.

Just trying to understand the pros and cons of auto switching and presumably hodl'ing, if you don't have time to spend on the exchanges everyday trading what you're mining, but just want to "set it and forget it".

Thanks

papampi

full member

Activity: 686

Merit: 140

Linux FOREVER! Resistance is futile!!!

Quote from: Alienbert on October 12, 2017, 08:57:17 AM

Quote from: damNmad on October 12, 2017, 08:07:46 AM

Quote from: Alienbert on October 12, 2017, 07:37:11 AM

Quote from: damNmad on October 12, 2017, 03:50:05 AM

Quote from: Alienbert on October 12, 2017, 01:26:22 AM

Hi!

I tried to mine Mona Coin on Lyra algo, but when the miner starts, he closes after seconds! i didint overclocked at the test.
i have 10x 1070 and 3x1060 with the new NVOC

At the Miner:

ccminer 1.8.2 for nvidia gpus........................
..................
.................

Intensity set to 21
Starting on stratum+tcp://mona.suprnova.cc:2995
NVML GPU Monotoring enable
13 miner threads started, using lyra2v2 algo
Stratum difficultly set to 1

After this, short time nothing, than screen terminated.

Have someone an idea what could it happens?

nice greets, thanks

I can confirm that your pool details are fine, make sure your worker details are set fine.

Code:

MONA_WORKER="suprnovaWorkerName"
MONA_ADDRESS="suprnovaLoginName"

May be try to reduce you intensity a bit probably?

Thanks for your answer!
The suprnovaLoginName is right, because when i try another one it writes, it cannot connect to stratum!
Is the WorkerName alone enough, or i also must write the worker pw?

now i tried with itensity 15 - same problem

I would also suggest you to try TPccminer; to do so you need to edit the below lines

Quote

if [ $COIN == "MONA" ]
then
HCD='/home/m1/SPccminer/ccminer'
ADDR="$MONA_ADDRESS.$MONA_WORKER"

to this;

Quote

if [ $COIN == "MONA" ]
then
HCD='/home/m1/TPccminer/ccminer'
ADDR="$MONA_ADDRESS.$MONA_WORKER"

Give it a shot and let me know if it worked for you.

Thanks, but the same problem.
I dont know what happens! ETH + ZEC runs great, no problems, but MONA doesnt run.

I am mining Mona with ASccminer and intensity 21 with no problem and great hash rate on suprnova
are you sure you made your worker in suprnova settings?
suprnova dont creat worker automatically , you should make them manually

Alienbert

newbie

Activity: 26

Merit: 0

Quote from: damNmad on October 12, 2017, 08:07:46 AM

Quote from: Alienbert on October 12, 2017, 07:37:11 AM

Quote from: damNmad on October 12, 2017, 03:50:05 AM

Quote from: Alienbert on October 12, 2017, 01:26:22 AM

Hi!

I tried to mine Mona Coin on Lyra algo, but when the miner starts, he closes after seconds! i didint overclocked at the test.
i have 10x 1070 and 3x1060 with the new NVOC

At the Miner:

ccminer 1.8.2 for nvidia gpus........................
..................
.................

Intensity set to 21
Starting on stratum+tcp://mona.suprnova.cc:2995
NVML GPU Monotoring enable
13 miner threads started, using lyra2v2 algo
Stratum difficultly set to 1

After this, short time nothing, than screen terminated.

Have someone an idea what could it happens?

nice greets, thanks

I can confirm that your pool details are fine, make sure your worker details are set fine.

Code:

MONA_WORKER="suprnovaWorkerName"
MONA_ADDRESS="suprnovaLoginName"

May be try to reduce you intensity a bit probably?

Thanks for your answer!
The suprnovaLoginName is right, because when i try another one it writes, it cannot connect to stratum!
Is the WorkerName alone enough, or i also must write the worker pw?

now i tried with itensity 15 - same problem

I would also suggest you to try TPccminer; to do so you need to edit the below lines

Quote

if [ $COIN == "MONA" ]
then
HCD='/home/m1/SPccminer/ccminer'
ADDR="$MONA_ADDRESS.$MONA_WORKER"

to this;

Quote

if [ $COIN == "MONA" ]
then
HCD='/home/m1/TPccminer/ccminer'
ADDR="$MONA_ADDRESS.$MONA_WORKER"

Give it a shot and let me know if it worked for you.

Thanks, but the same problem.
I dont know what happens! ETH + ZEC runs great, no problems, but MONA doesnt run.

papampi

full member

Activity: 686

Merit: 140

Linux FOREVER! Resistance is futile!!!

Thanks to damNmad and hurvajs77
New WTM auto switch is ready

Changes :
+ Switcher now check for difference between top coin and current mining coin profitability and wont switch if its less than the value given in 1bash
+ Miner restart faster now, no more 3main restart
- damNmad conditional OC settings not working for now, set it to no and set a default OC for all coins you choose (looking for a workaround to fix it)

You can get the new scripts from HERE

damNmad

full member

Activity: 378

Merit: 104

nvOC forever

Quote from: Alienbert on October 12, 2017, 07:37:11 AM

Quote from: damNmad on October 12, 2017, 03:50:05 AM

Quote from: Alienbert on October 12, 2017, 01:26:22 AM

Hi!

I tried to mine Mona Coin on Lyra algo, but when the miner starts, he closes after seconds! i didint overclocked at the test.
i have 10x 1070 and 3x1060 with the new NVOC

At the Miner:

ccminer 1.8.2 for nvidia gpus........................
..................
.................

Intensity set to 21
Starting on stratum+tcp://mona.suprnova.cc:2995
NVML GPU Monotoring enable
13 miner threads started, using lyra2v2 algo
Stratum difficultly set to 1

After this, short time nothing, than screen terminated.

Have someone an idea what could it happens?

nice greets, thanks

I can confirm that your pool details are fine, make sure your worker details are set fine.

Code:

MONA_WORKER="suprnovaWorkerName"
MONA_ADDRESS="suprnovaLoginName"

May be try to reduce you intensity a bit probably?

Thanks for your answer!
The suprnovaLoginName is right, because when i try another one it writes, it cannot connect to stratum!
Is the WorkerName alone enough, or i also must write the worker pw?

now i tried with itensity 15 - same problem

I would also suggest you to try TPccminer; to do so you need to edit the below lines

Quote

if [ $COIN == "MONA" ]
then
HCD='/home/m1/SPccminer/ccminer'
ADDR="$MONA_ADDRESS.$MONA_WORKER"

to this;

Quote

if [ $COIN == "MONA" ]
then
HCD='/home/m1/TPccminer/ccminer'
ADDR="$MONA_ADDRESS.$MONA_WORKER"

Give it a shot and let me know if it worked for you.

papampi

full member

Activity: 686

Merit: 140

Linux FOREVER! Resistance is futile!!!

Quote from: hurvajs77 on October 11, 2017, 06:02:10 PM

Hi papampi,
I'm using your telegram messages. Excellent!

I've a small improvement for miner uptime (I got always empty), so I check command. There is used unknown option -p and failed

The universal solution is:

Code:

ps -eo comm,etime | grep -i miner | grep -vi cpu | awk '{print $2}'

Other infos are empty too, I check later

Thanks mate
I'm aware of some problems thats why we call beta version:)
Some info and hash rate on web has not completed yet , will try to add them all for next version.

Alienbert

newbie

Activity: 26

Merit: 0

Quote from: damNmad on October 12, 2017, 03:50:05 AM

Quote from: Alienbert on October 12, 2017, 01:26:22 AM

Hi!

I tried to mine Mona Coin on Lyra algo, but when the miner starts, he closes after seconds! i didint overclocked at the test.
i have 10x 1070 and 3x1060 with the new NVOC

At the Miner:

ccminer 1.8.2 for nvidia gpus........................
..................
.................

Intensity set to 21
Starting on stratum+tcp://mona.suprnova.cc:2995
NVML GPU Monotoring enable
13 miner threads started, using lyra2v2 algo
Stratum difficultly set to 1

After this, short time nothing, than screen terminated.

Have someone an idea what could it happens?

nice greets, thanks

I can confirm that your pool details are fine, make sure your worker details are set fine.

Code:

MONA_WORKER="suprnovaWorkerName"
MONA_ADDRESS="suprnovaLoginName"

May be try to reduce you intensity a bit probably?

Thanks for your answer!
The suprnovaLoginName is right, because when i try another one it writes, it cannot connect to stratum!
Is the WorkerName alone enough, or i also must write the worker pw?

now i tried with itensity 15 - same problem

damNmad

full member

Activity: 378

Merit: 104

nvOC forever

Quote from: Alienbert on October 12, 2017, 01:26:22 AM

Hi!

I tried to mine Mona Coin on Lyra algo, but when the miner starts, he closes after seconds! i didint overclocked at the test.
i have 10x 1070 and 3x1060 with the new NVOC

At the Miner:

ccminer 1.8.2 for nvidia gpus........................
..................
.................

Intensity set to 21
Starting on stratum+tcp://mona.suprnova.cc:2995
NVML GPU Monotoring enable
13 miner threads started, using lyra2v2 algo
Stratum difficultly set to 1

After this, short time nothing, than screen terminated.

Have someone an idea what could it happens?

nice greets, thanks

I can confirm that your pool details are fine, make sure your worker details are set fine.

Code:

MONA_WORKER="suprnovaWorkerName"
MONA_ADDRESS="suprnovaLoginName"

May be try to reduce you intensity a bit probably?

mikespax

full member

Activity: 362

Merit: 102

I've been having this recurring issue on and off and it's really bugging me. Occasionally, I lose manual temperature control on several cards simultaneously. This interferes with the temperature script, which doesn't make me feel too safe about leaving it running unattended.

I've tried all sorts of things over the past couple of days.

Any ideas?

Also, claymore seems to be the only miner I can get working on my 19 gpu rig. Could also just be my g3930 or 4gb of ram though.

https://m.imgur.com/a/R9qu1

Alienbert

newbie

Activity: 26

Merit: 0

Hi!

I tried to mine Mona Coin on Lyra algo, but when the miner starts, he closes after seconds! i didint overclocked at the test.
i have 10x 1070 and 3x1060 with the new NVOC

At the Miner:

ccminer 1.8.2 for nvidia gpus........................
..................
.................

Intensity set to 21
Starting on stratum+tcp://mona.suprnova.cc:2995
NVML GPU Monotoring enable
13 miner threads started, using lyra2v2 algo
Stratum difficultly set to 1

After this, short time nothing, than screen terminated.

Have someone an idea what could it happens?

nice greets, thanks

damNmad

full member

Activity: 378

Merit: 104

nvOC forever

Quote from: Dhodge87 on October 11, 2017, 05:43:39 PM

Quote from: damNmad on October 11, 2017, 03:51:55 PM

Quote from: Dhodge87 on October 11, 2017, 02:51:22 PM

Still not working....
I tried Us and EU aswell as ports 8008 and 8888
I don't think it has to do with the pool address as I tried the hadl pool with the same results.

https://imgur.com/a/HL5sE

I can mine 4 other coins with out a problem but UBQ doesn't appear to work.

Can any one else get it to work?
Has any one else successfully mined it with NVOC?

Mate, can you help me by giving the result of this command when it failed?

Quote

ps aux | grep miner

Also try this line (closing the main console + wdog + temp control) just for a minute or so in guake terminal.

Quote

/home/m1/eth/ethminer_11/ethminer -S eu.ubiqpool.io:8008 -O yourUBQaddress.minerName:x -SP 1 -U

Let me know what you see and take the result of it. I've mined UBQ so many times and tested it too.

Tested the above just as of now :

Code:

m1@m1-desktop:~$ /home/m1/eth/ethminer_11/ethminer -S eu.ubiqpool.io:8008 -O 0x403562790061cccfBd1Bd6714A5456987cd4a599.RIGV180V05:x -SP 1 -U
[CUDA]:Using grid size 8192, block size 128

  ℹ  21:43:09|ethminer  Connecting to stratum server eu.ubiqpool.io:8008
Could not resolve hosteu.ubiqpool.io:8008, Operation canceled  ℹ  21:43:09|ethminer  Reconnecting in 3 seconds...
  ℹ  21:43:12|ethminer  Connecting to stratum server eu.ubiqpool.io:8008
  ℹ  21:43:12|stratum  Connected to stratum server eu.ubiqpool.io : 8008
  ℹ  21:43:12|stratum  Starting farm
  ℹ  21:43:12|stratum  Received new job #0xe55137
  ℹ  21:43:12|cudaminer0  set work; seed: #c307e562, target:  #0000000112e0
  ℹ  21:43:12|cudaminer0  Initialising miner...
  ℹ  21:43:12|cudaminer1  set work; seed: #c307e562, target:  #0000000112e0
  ℹ  21:43:12|cudaminer1  Initialising miner...
  ℹ  21:43:12|cudaminer2  set work; seed: #c307e562, target:  #0000000112e0
  ℹ  21:43:12|cudaminer2  Initialising miner...
  ℹ  21:43:12|cudaminer3  set work; seed: #c307e562, target:  #0000000112e0
  ℹ  21:43:12|cudaminer3  Initialising miner...
  ℹ  21:43:12|cudaminer4  set work; seed: #c307e562, target:  #0000000112e0
  ℹ  21:43:12|cudaminer4  Initialising miner...
  ℹ  21:43:12|cudaminer5  set work; seed: #c307e562, target:  #0000000112e0
  ℹ  21:43:12|cudaminer5  Initialising miner...
  ℹ  21:43:12|cudaminer6  set work; seed: #c307e562, target:  #0000000112e0
  ℹ  21:43:12|cudaminer6  Initialising miner...
  ℹ  21:43:12|cudaminer7  set work; seed: #c307e562, target:  #0000000112e0
  ℹ  21:43:12|cudaminer7  Initialising miner...
  m  21:43:13|ethminer  Mining on PoWhash #e55137b1 : 0.00MH/s [A0+0:R0+0:F0]
Using device: GeForce GTX 1060 6GB (Compute 6.1)
Using device: GeForce GTX 1060 6GB (Compute 6.1)
Using device: GeForce GTX 1060 6GB (Compute 6.1)
Using device: GeForce GTX 1060 6GB (Compute 6.1)
Using device: GeForce GTX 1060 6GB (Compute 6.1)
Using device: GeForce GTX 1060 6GB (Compute 6.1)
Using device: GeForce GTX 1060 6GB (Compute 6.1)
Using device: GeForce GTX 1060 6GB (Compute 6.1)
  m  21:43:15|ethminer  Mining on PoWhash #e55137b1 : 0.00MH/s [A0+0:R0+0:F0]
  m  21:43:17|ethminer  Mining on PoWhash #e55137b1 : 0.00MH/s [A0+0:R0+0:F0]
  ℹ  21:43:18|stratum  Received new job #0x6471ff
Generating DAG for GPU #7
Generating DAG for GPU #1
Generating DAG for GPU #6
Generating DAG for GPU #2
Generating DAG for GPU #5
Generating DAG for GPU #3
Generating DAG for GPU #0
Generating DAG for GPU #4

Looking forward for your results; determined to close this issue asap.

The PS AUX code, do I enter that into quak?

The result for the other code is endless repeating trying to connect.

https://imgur.com/a/eH5Uv

yes, you need to enter it in guake terminal;

I suggest trying remote desktop using teamviewer and try all the possible ways I possibly can!!

If you are ok with it, please send your teamviewer details via PM or contact me on telegram @damNmad, i will try my best to sort this issue!!

damNmad

full member

Activity: 378

Merit: 104

nvOC forever

Quote from: hurvajs77 on October 11, 2017, 05:33:44 PM

Quote from: bwarbwar on October 11, 2017, 02:34:23 PM

...Also I think I found an error for SIB, it was trying to launch using the PXC address. I made the change in 3main but never checked to see if it was working properly.

Hi Fullzero,
yes, it's true. I upgraded to v0019-13 today, now tried switch to SIB and 3mail really use PXC settings

Please, fix replace

Code:

$HCD -a sib -o $PXC_POOL -u $ADDR -p x -i $SIB_INTENSITY

for

Code:

$HCD -a sib -o $SIB_POOL -u $ADDR -p x -i $SIB_INTENSITY

Thanks ;-)

Yes, i have noticed that too, probably my mistake while giving my copy! sorry for that, hope fullzero fixes it in next version.

Decrypted Capital

newbie

Activity: 7

Merit: 0

This software is awesome! I use it on all my Nvidia rigs and it has worked near flawlessly for me for upwards of 4 months now. Started back when it was nvOC 15! Thank you for continually developing this

Topic: [ mining os ] nvoc - page 190. (Read 418546 times)