Topic: [ mining os ] nvoc - page 224. (Read 418546 times)

Yeah I had set up the worker. what I messed up on was, I had another log in for my windows machine and my brilliant self miss matched the log in and worker names. so yeah your solution was spot on it was just me who managed to un-fix your help lol. but seriously thanks for the help. this is my first venture into Linux for mining. 13 cards per motherboard seems way more efficient than 8. and my 1070's are even managing to get into the 480/sols not 1080 TIs but very respectable for the card.

Good to know. I do this kind of things via rasberrypi + temp sensors

did you make the worker in suprnova worker page ?

ok progress has been made but now I am getting a stratum authorization error. below is basically what I have. do I not need to put the worker password somewhere? also I do appreciate the help. thanks

ZEN_WORKER="tempworker1"
ZEN_ADDRESS="yourSuprNovaLoginName"
ZEN_POOL="zen.suprnova.cc"
ZEN_PORT="3618"


well I feel real stupid. I am up and running. thank you for the help. I miss typed name I used the log in info not the user name. it was a me issue lol

Hi guys

i have a problem if anyone can give me a fix. I am using Salfter profit switch MPH or nicehash, but it automatically gives me ethminer. is there any way to set it using claymore instead or if it is also possible to set it if mining eth (most profitable) it starts in dual mining mode.
thanks

Hi mate
Could you manage to mine sib x11ghost?
Any miner I try give me some kind of error.

lol, almost same answer
Don't kill your GPU to save the fan.
If I remember correctly It won't go lower, because minimum fan speed is 29.

no i fu**** question

I want to set fans to lower than 30, it wont do it...

Compiles ok, but Neoscrypt gives me this error



I just opened a new ticket
If any one else has same issue please follow this ticket and conform it.
may be some one try to solve it.

thank you i am looking to do the crontab

Hello papampi; hope you are well

I believe we can compile it well but when we try to use it fails to mine with some weird errors!! or it has been fixed?

I've issue with connecting to stratum pool using EWBF;

try this:

This should work; let me know if it doesn't.

Anyone successfully mined sib x11ghost with Alexis?
I know Alexis should be able to handle it, but it gives me error :

@fullzero
What do you think about integrating dropbox like pastebin too
I think It has so much more benefits than pastebin.
It can be either as a dropbox file link or a dropbox folder to check the files inside it.

Exactly what is your zen supernava 1bash lines (copy / paste it )\
it should be like this :
You make new or update your worker name in suprnova worker page ?
and post output of

If you just want KTccminer-cryptonight salfter has compiled one :


I could compile KTccminer on nv0019, but not on my other ubuntu
gave me some errors
just download the source
and run the commands with no args
it should be ok

Greetings, i am in the process of setting up a 13 card rig to see what the world of mining is like. So i have run into an issue that seems odd. I have looked around and have not seen it. So here it is.

My miner keeps telling me it failed to connect to the host and i am not sure why. I am trying to use suprnova.cc pool

I set coin to ZEN
I then changed my worker name to my pool worker name
i have set the address to stratum+tcp://zen.suprnova.cc
i have set the port to 3618
and i have put my wallet address in.

So what am i missing? On my Windows rig i have to put worker name and password info in but i do not see any place to enter that. then when i start it up it just keeps failing to connect to host.

I can not install KTccminer on NVOCv019.

I looked at your post on their incident ticket page and I find that 4 days ago you were able to compile it correctly on your machine.
Unfortunately, I have not managed to do the same with my Biostar TB250-BTC PRO (Socket 1151) and my 2 x ASUS GTX1070 DUAL.

I use the script (s) of Scott ALlfter (alias Salfter) and I went on his page here: https://gitlab.com/salfter/mph_switch/tree/master. This page explains how to add the Cryptonight and Sia miners but I was unable to compile by following the command lines given by Salfter.

./autoreconf.sh does not exist in the KTccminer directory
and
./configure --with-cuda- / usr / local / cuda-8.0 also returns errors after executing the file: autogen.sh

here is what the configuration command gives me before the command make:

user @ hostname $ / KTccminer-cryptonight $ ./configure --with-cuda / usr / local / cuda
configure: WARNING: you should use --build, --host, --target
configure: WARNING: invalid host type: / usr / local / cuda
checking build system type ... / usr / local / cuda
configure: error: invalid value of canonical build

It seems to me to have found by re-reading the bash-history that it tries to mine with the CPUminer which mine at the same time as ETH and the others algo.
is it possible to mining with CPUs and GPUs with two different software simultaneously without it posing bp?
That is, I use Scott's mining profit switching script and I have activated the plusCPU function of fullZERO in the 1bash

1 / How to install KTccminer correctly?
2 / Is it possible to mine monero with the CPUs in addition to the GPUs ?

@Scott Alfter

The use of your script delighted me, but I hesitated for a long time because of the lack of documentation. I did not know too much or I was going. and I still do not really know where all the files you are using.

Maybe you have some documentation about these scripts?

NB: I used google translation to write this message

That's 188 mini rigs if my math is correct, and you have to add cabling/switches/power for all the cabling so 5x48 ports switches can handle that but then you still have a ton of cables (and time to manage it all) and if you go second hand for the switches, one switch dies and brings down 48 rigs, anyway you slice it you need cabling and can have many cards go down depending on the nature of your failure.
Then there is heat.
Of course the above can be great in the right circumstances.

FYI - 1 SRR controls 8 rigs, there should be a daughterboard available eventually to add 32 for a total of 40 rigs for 1 SRR.
I'm very happy with it.

The highest temp I have on these cards is 61 degrees and fans are running no more than 67% so I doubt that these causes the problem. Unfortunately in P106-100 headless mode neither watchdog nor tempcontrol works so I do not use those.