Guys I cant see the mining stats, instead on my screen it says "
Process in screen miner; attach with: screen -r miner
Topic: [ mining os ] nvoc - page 228. (Read 418546 times)
Hi
I'm having a problem where nvoc mines xmr instead of HUSH which i configured in 1bash. It does not utilize my GPUs at all. please help.
I found a solution, there are 2 1bash files one at "home" and the other at "9.4 MB volume", i edited the wrong one
I'm having a problem where nvoc mines xmr instead of HUSH which i configured in 1bash. It does not utilize my GPUs at all. please help.
I found a solution, there are 2 1bash files one at "home" and the other at "9.4 MB volume", i edited the wrong one
Guys; I thought of keeping all the best OC settings in one place for all the available cards in the market.
I would need your help to input your best OC finds bit of details; happy to update it time to time; it would help us hit the rock bottom (even for a beginner).
You can PM me or Post a reply on this post or request on this post :
https://bitcointalksearch.org/topic/all-oc-settings-in-one-place-2176936
Hope I get good support from our nvOC community members to make this possible
This is URL :
http://krypto-mining.blogspot.co.uk/
I've only started; any suggestions welcome
I would need your help to input your best OC finds bit of details; happy to update it time to time; it would help us hit the rock bottom (even for a beginner).
You can PM me or Post a reply on this post or request on this post :
https://bitcointalksearch.org/topic/all-oc-settings-in-one-place-2176936
Hope I get good support from our nvOC community members to make this possible
This is URL :
http://krypto-mining.blogspot.co.uk/
I've only started; any suggestions welcome
I plan to try salfter's coin switching app soon, but would like to know your experience first: what has been shown to be more lucrative, Mining Pool Hub or NiceHash? (Sorry if it's been asked before, couldn't find any previous answers.)
There was a lengthy comparison somewhere on this forum between MPH, NiceHash, and zpool that found zpool to charge the lowest overall fees and thus be the most profitable.
Cool, thanks! I'll look again in the previous pages to catch up with this discussion.
I plan to try salfter's coin switching app soon, but would like to know your experience first: what has been shown to be more lucrative, Mining Pool Hub or NiceHash? (Sorry if it's been asked before, couldn't find any previous answers.)
There was a lengthy comparison somewhere on this forum between MPH, NiceHash, and zpool that found zpool to charge the lowest overall fees and thus be the most profitable.
guys is there any tuts to mine HUSH? open the bash wow a lot of codes lol... can someone help me? and i heard from the vid how to , he said don't touch this below this line....
I plan to try salfter's coin switching app soon, but would like to know your experience first: what has been shown to be more lucrative, Mining Pool Hub or NiceHash? (Sorry if it's been asked before, couldn't find any previous answers.)
@damNmad
Thanx for your reply.
Now all working fine ...
After some minutes I have >750 sol/s per GPU. Is it a good number for a gtx1080ti ?
I probably need to twicking powerlimit / cc / cm ...
By the way, powerlimit is a watt number but I just don't know if cc and/or cm are for Mhz or % ?
What's your favorite overclocking or dowclocking numbers (powerlimit / cc / cm) for a MSI Geforce gtx1080ti Gaming OC ?
In advance, thanks for your help.
_S_C_
Thanx for your reply.
Quote
It has to go like this:
Worker is what you add on suprnova portal
Code:
ZEN_WORKER="gaol"
Address is your username for logging into suprnova portal
Code:
ZEN_ADDRESS="gaol"
Worker is what you add on suprnova portal
Code:
ZEN_WORKER="gaol"
Address is your username for logging into suprnova portal
Code:
ZEN_ADDRESS="gaol"
Now all working fine ...
After some minutes I have >750 sol/s per GPU. Is it a good number for a gtx1080ti ?
I probably need to twicking powerlimit / cc / cm ...
By the way, powerlimit is a watt number but I just don't know if cc and/or cm are for Mhz or % ?
What's your favorite overclocking or dowclocking numbers (powerlimit / cc / cm) for a MSI Geforce gtx1080ti Gaming OC ?
In advance, thanks for your help.
_S_C_
Glad it worked.
Speaking of OC's , I only have 1 rig, which has only 1060's.
I can suggest the best for it but not much about 1080 TBH.
nvOC doesn't use %
I would suggest to try 80% of your power limit, my 1060 power limit is 120 and 80% of it is 96.
Core clock, fullzero suggested me in the beginning to increase 10 at a time until it crashes.
Once you find the stable CC - core clock then increase the MC - memory clock 50 at a time until you see the number of sols stable
This is just my illustration from my experience of 1060. If I were you, I would Google first and try what people suggesting, there are lots of topics about this
Tip: Every algorithm and every coin is different, so you need to change it depending on algorithm/coin you mine.
PS: Welcome to the Jungle
Thanks for your reply damNmad.
As you mentioned and as suggested by fullzero, I'm gonna try to oc core clock 10 by 10 until crashes.
Once the cc is stable, I'm gonna try to oc memory clock by 50 until stable sols levels.
Regards.
_S_C_
P.S.: many thanks to fullzero and all the co-workers for this amazing mining nvoc' os.
Is it sort of trivial to make the adjustments in nvOC for going over 13 GPUs? I should be crossing that threshold soon enough..
when i set:
BaliMiner_TELEGRAM_ALERTS="YES"
and after install libutempter0 got this error:
Then i press CTRL+C and the mining process starts ok
If I set:
BaliMiner_TELEGRAM_ALERTS="NO"
All runs ok.
In both cases (and from the first install of nVoc 0.19) i get this too:
All done.
No devices were found
No devices were found
No devices were found
No devices were found
No devices were found
No devices were found
No devices were found
No devices were found
No devices were found
Any fix?
Thx.
Have you checked for upgradable packages ?BaliMiner_TELEGRAM_ALERTS="YES"
and after install libutempter0 got this error:
Code:
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for .
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for.
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for.
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for.
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for.
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for.
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for.
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for.
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for.
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for.
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for.
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for.
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for.
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for.
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for.
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for.
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for.
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for.
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for.
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for.
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for.
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for.
INFO:guake.guake_app:Logging configuration complete
/usr/lib/python2.7/dist-packages/guake/guake_app.py:1785: GtkWarning: gtk_box_pack: assertion 'child->parent == NULL' failed
self.mainframe.pack_start(self.notebook, expand=True, fill=True, padding=0)
** (guake:4329): WARNING **: Binding 'F12' failed!
INFO:guake.notifier:Notification service is not running (yet). Guake can't display notifications!
We'll retry a few times more a bit later, but you can use
the following command to disable the startup notification:
$ gconftool-2 --type bool --set /apps/guake/general/use_popup false
^CTraceback (most recent call last):
File "/usr/lib/python2.7/runpy.py", line 174, in _run_module_as_main
"__main__", fname, loader, pkg_name)
File "/usr/lib/python2.7/runpy.py", line 72, in _run_code
exec code in run_globals
File "/usr/lib/python2.7/dist-packages/guake/main.py", line 239, in
exec_main()
File "/usr/lib/python2.7/dist-packages/guake/main.py", line 236, in exec_main
gtk.main()
KeyboardInterrupt
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for
INFO:guake.guake_app:Logging configuration complete
/usr/lib/python2.7/dist-packages/guake/guake_app.py:1785: GtkWarning: gtk_box_pack: assertion 'child->parent == NULL' failed
self.mainframe.pack_start(self.notebook, expand=True, fill=True, padding=0)
** (guake:4329): WARNING **: Binding 'F12' failed!
INFO:guake.notifier:Notification service is not running (yet). Guake can't display notifications!
We'll retry a few times more a bit later, but you can use
the following command to disable the startup notification:
$ gconftool-2 --type bool --set /apps/guake/general/use_popup false
^CTraceback (most recent call last):
File "/usr/lib/python2.7/runpy.py", line 174, in _run_module_as_main
"__main__", fname, loader, pkg_name)
File "/usr/lib/python2.7/runpy.py", line 72, in _run_code
exec code in run_globals
File "/usr/lib/python2.7/dist-packages/guake/main.py", line 239, in
exec_main()
File "/usr/lib/python2.7/dist-packages/guake/main.py", line 236, in exec_main
gtk.main()
KeyboardInterrupt
Then i press CTRL+C and the mining process starts ok
If I set:
BaliMiner_TELEGRAM_ALERTS="NO"
All runs ok.
In both cases (and from the first install of nVoc 0.19) i get this too:
All done.
No devices were found
No devices were found
No devices were found
No devices were found
No devices were found
No devices were found
No devices were found
No devices were found
No devices were found
Any fix?
Thx.
I think guake need to be updated
If not run
Code:
sudo apt update && sudo apt uograde
Reboot, let's see if it fixes.Thx so much, that fixed the problem :-)
when i set:
BaliMiner_TELEGRAM_ALERTS="YES"
and after install libutempter0 got this error:
Then i press CTRL+C and the mining process starts ok
If I set:
BaliMiner_TELEGRAM_ALERTS="YES"
All runs ok.
In both cases (and from the first install of nVoc 0.19) i get this too:
All done.
No devices were found
No devices were found
No devices were found
No devices were found
No devices were found
No devices were found
No devices were found
No devices were found
No devices were found
Any fix?
Thx.
Have you checked for upgradable packages ?BaliMiner_TELEGRAM_ALERTS="YES"
and after install libutempter0 got this error:
Code:
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for .
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for.
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for.
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for.
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for.
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for.
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for.
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for.
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for.
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for.
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for.
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for.
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for.
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for.
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for.
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for.
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for.
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for.
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for.
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for.
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for.
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for.
INFO:guake.guake_app:Logging configuration complete
/usr/lib/python2.7/dist-packages/guake/guake_app.py:1785: GtkWarning: gtk_box_pack: assertion 'child->parent == NULL' failed
self.mainframe.pack_start(self.notebook, expand=True, fill=True, padding=0)
** (guake:4329): WARNING **: Binding 'F12' failed!
INFO:guake.notifier:Notification service is not running (yet). Guake can't display notifications!
We'll retry a few times more a bit later, but you can use
the following command to disable the startup notification:
$ gconftool-2 --type bool --set /apps/guake/general/use_popup false
^CTraceback (most recent call last):
File "/usr/lib/python2.7/runpy.py", line 174, in _run_module_as_main
"__main__", fname, loader, pkg_name)
File "/usr/lib/python2.7/runpy.py", line 72, in _run_code
exec code in run_globals
File "/usr/lib/python2.7/dist-packages/guake/main.py", line 239, in
exec_main()
File "/usr/lib/python2.7/dist-packages/guake/main.py", line 236, in exec_main
gtk.main()
KeyboardInterrupt
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for
INFO:guake.guake_app:Logging configuration complete
/usr/lib/python2.7/dist-packages/guake/guake_app.py:1785: GtkWarning: gtk_box_pack: assertion 'child->parent == NULL' failed
self.mainframe.pack_start(self.notebook, expand=True, fill=True, padding=0)
** (guake:4329): WARNING **: Binding 'F12' failed!
INFO:guake.notifier:Notification service is not running (yet). Guake can't display notifications!
We'll retry a few times more a bit later, but you can use
the following command to disable the startup notification:
$ gconftool-2 --type bool --set /apps/guake/general/use_popup false
^CTraceback (most recent call last):
File "/usr/lib/python2.7/runpy.py", line 174, in _run_module_as_main
"__main__", fname, loader, pkg_name)
File "/usr/lib/python2.7/runpy.py", line 72, in _run_code
exec code in run_globals
File "/usr/lib/python2.7/dist-packages/guake/main.py", line 239, in
exec_main()
File "/usr/lib/python2.7/dist-packages/guake/main.py", line 236, in exec_main
gtk.main()
KeyboardInterrupt
Then i press CTRL+C and the mining process starts ok
If I set:
BaliMiner_TELEGRAM_ALERTS="YES"
All runs ok.
In both cases (and from the first install of nVoc 0.19) i get this too:
All done.
No devices were found
No devices were found
No devices were found
No devices were found
No devices were found
No devices were found
No devices were found
No devices were found
No devices were found
Any fix?
Thx.
I think guake need to be updated
If not run
Code:
sudo apt update && sudo apt uograde
Reboot, let's see if it fixes.
when i set:
BaliMiner_TELEGRAM_ALERTS="YES"
and after install libutempter0 got this error:
Then i press CTRL+C and the mining process starts ok
If I set:
BaliMiner_TELEGRAM_ALERTS="NO"
All runs ok.
In both cases (and from the first install of nVoc 0.19) i get this too:
All done.
No devices were found
No devices were found
No devices were found
No devices were found
No devices were found
No devices were found
No devices were found
No devices were found
No devices were found
Any fix?
Thx.
BaliMiner_TELEGRAM_ALERTS="YES"
and after install libutempter0 got this error:
Code:
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for .
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for.
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for.
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for.
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for.
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for.
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for.
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for.
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for.
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for.
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for.
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for.
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for.
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for.
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for.
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for.
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for.
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for.
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for.
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for.
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for.
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for.
INFO:guake.guake_app:Logging configuration complete
/usr/lib/python2.7/dist-packages/guake/guake_app.py:1785: GtkWarning: gtk_box_pack: assertion 'child->parent == NULL' failed
self.mainframe.pack_start(self.notebook, expand=True, fill=True, padding=0)
** (guake:4329): WARNING **: Binding 'F12' failed!
INFO:guake.notifier:Notification service is not running (yet). Guake can't display notifications!
We'll retry a few times more a bit later, but you can use
the following command to disable the startup notification:
$ gconftool-2 --type bool --set /apps/guake/general/use_popup false
^CTraceback (most recent call last):
File "/usr/lib/python2.7/runpy.py", line 174, in _run_module_as_main
"__main__", fname, loader, pkg_name)
File "/usr/lib/python2.7/runpy.py", line 72, in _run_code
exec code in run_globals
File "/usr/lib/python2.7/dist-packages/guake/main.py", line 239, in
exec_main()
File "/usr/lib/python2.7/dist-packages/guake/main.py", line 236, in exec_main
gtk.main()
KeyboardInterrupt
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for
(guake:4329): libglade-WARNING **: unknown attribute `swapped' for
INFO:guake.guake_app:Logging configuration complete
/usr/lib/python2.7/dist-packages/guake/guake_app.py:1785: GtkWarning: gtk_box_pack: assertion 'child->parent == NULL' failed
self.mainframe.pack_start(self.notebook, expand=True, fill=True, padding=0)
** (guake:4329): WARNING **: Binding 'F12' failed!
INFO:guake.notifier:Notification service is not running (yet). Guake can't display notifications!
We'll retry a few times more a bit later, but you can use
the following command to disable the startup notification:
$ gconftool-2 --type bool --set /apps/guake/general/use_popup false
^CTraceback (most recent call last):
File "/usr/lib/python2.7/runpy.py", line 174, in _run_module_as_main
"__main__", fname, loader, pkg_name)
File "/usr/lib/python2.7/runpy.py", line 72, in _run_code
exec code in run_globals
File "/usr/lib/python2.7/dist-packages/guake/main.py", line 239, in
exec_main()
File "/usr/lib/python2.7/dist-packages/guake/main.py", line 236, in exec_main
gtk.main()
KeyboardInterrupt
Then i press CTRL+C and the mining process starts ok
If I set:
BaliMiner_TELEGRAM_ALERTS="NO"
All runs ok.
In both cases (and from the first install of nVoc 0.19) i get this too:
All done.
No devices were found
No devices were found
No devices were found
No devices were found
No devices were found
No devices were found
No devices were found
No devices were found
No devices were found
Any fix?
Thx.
Thanks a lot @salfter.
SALFTER_MPH_PROFIT_SWITCHING is working now,
But I think it does not change the power limit based on 1bash algo values
It does change CC and MC.
screen start with this :
nvidia-smi :
Another question.
Is it possible to use multi algo switch from this link https://miningpoolhub.com/index.php?page=api&action=getautoswitchingandprofitsstatistics
instead of coin switch ?
Multi algo will switch coins based on their profits without stopping minner,
For example if mining zcash and zclassic goes more profitable it switches within the pool, and miner wont get restart...
SALFTER_MPH_PROFIT_SWITCHING is working now,
But I think it does not change the power limit based on 1bash algo values
It does change CC and MC.
Code:
Myriad_Groestl_POWERLIMIT_WATTS=125
__Myriad_Groestl_CORE_OVERCLOCK=100
Myriad_Groestl_MEMORY_OVERCLOCK=100
__Myriad_Groestl_CORE_OVERCLOCK=100
Myriad_Groestl_MEMORY_OVERCLOCK=100
Code:
POWERLIMIT_WATTS=135
__CORE_OVERCLOCK=100
MEMORY_OVERCLOCK=600
__CORE_OVERCLOCK=100
MEMORY_OVERCLOCK=600
screen start with this :
Code:
INDIVIDUAL_POWERLIMIT_0: 135
INDIVIDUAL_POWERLIMIT_1: 135
INDIVIDUAL_POWERLIMIT_2: 135
INDIVIDUAL_POWERLIMIT_3: 135
INDIVIDUAL_POWERLIMIT_4: 135
INDIVIDUAL_POWERLIMIT_5: 135
INDIVIDUAL_POWERLIMIT_6: 135
INDIVIDUAL_POWERLIMIT_7: 135
INDIVIDUAL_POWERLIMIT_8: 135
INDIVIDUAL_POWERLIMIT_9: 135
INDIVIDUAL_POWERLIMIT_10: 135
INDIVIDUAL_POWERLIMIT_11: 135
INDIVIDUAL_POWERLIMIT_12: 135
INDIVIDUAL_POWERLIMIT_13: 135
TARGET_TEMP_0: 75
TARGET_TEMP_1: 75
TARGET_TEMP_2: 75
TARGET_TEMP_3: 75
TARGET_TEMP_4: 75
TARGET_TEMP_5: 75
TARGET_TEMP_6: 75
TARGET_TEMP_7: 75
TARGET_TEMP_8: 75
TARGET_TEMP_9: 75
TARGET_TEMP_10: 75
TARGET_TEMP_11: 75
TARGET_TEMP_12: 75
TARGET_TEMP_13: 75
FAN_ADJUST: 5
POWER_ADJUST: 5
ALLOWED_TEMP_DIFF: 3
RESTORE_POWER_LIMIT: 90
INDIVIDUAL_POWERLIMIT_1: 135
INDIVIDUAL_POWERLIMIT_2: 135
INDIVIDUAL_POWERLIMIT_3: 135
INDIVIDUAL_POWERLIMIT_4: 135
INDIVIDUAL_POWERLIMIT_5: 135
INDIVIDUAL_POWERLIMIT_6: 135
INDIVIDUAL_POWERLIMIT_7: 135
INDIVIDUAL_POWERLIMIT_8: 135
INDIVIDUAL_POWERLIMIT_9: 135
INDIVIDUAL_POWERLIMIT_10: 135
INDIVIDUAL_POWERLIMIT_11: 135
INDIVIDUAL_POWERLIMIT_12: 135
INDIVIDUAL_POWERLIMIT_13: 135
TARGET_TEMP_0: 75
TARGET_TEMP_1: 75
TARGET_TEMP_2: 75
TARGET_TEMP_3: 75
TARGET_TEMP_4: 75
TARGET_TEMP_5: 75
TARGET_TEMP_6: 75
TARGET_TEMP_7: 75
TARGET_TEMP_8: 75
TARGET_TEMP_9: 75
TARGET_TEMP_10: 75
TARGET_TEMP_11: 75
TARGET_TEMP_12: 75
TARGET_TEMP_13: 75
FAN_ADJUST: 5
POWER_ADJUST: 5
ALLOWED_TEMP_DIFF: 3
RESTORE_POWER_LIMIT: 90
nvidia-smi :
Code:
m1@m1-desktop-101:~$ nvidia-smi
Thu Sep 14 15:53:00 2017
+-----------------------------------------------------------------------------+
| NVIDIA-SMI 384.69 Driver Version: 384.69 |
|-------------------------------+----------------------+----------------------+
| GPU Name Persistence-M| Bus-Id Disp.A | Volatile Uncorr. ECC |
| Fan Temp Perf Pwr:Usage/Cap| Memory-Usage | GPU-Util Compute M. |
|===============================+======================+======================|
| 0 GeForce GTX 1070 Off | 00000000:01:00.0 On | N/A |
| 65% 74C P2 102W / 135W | 421MiB / 8113MiB | 94% Default |
+-------------------------------+----------------------+----------------------+
| 1 GeForce GTX 1070 Off | 00000000:02:00.0 Off | N/A |
| 65% 71C P2 133W / 135W | 180MiB / 8114MiB | 84% Default |
+-------------------------------+----------------------+----------------------+
| 2 GeForce GTX 1070 Off | 00000000:03:00.0 Off | N/A |
| 65% 68C P2 120W / 135W | 180MiB / 8114MiB | 97% Default |
+-------------------------------+----------------------+----------------------+
| 3 GeForce GTX 1070 Off | 00000000:05:00.0 Off | N/A |
| 65% 69C P2 112W / 135W | 180MiB / 8114MiB | 96% Default |
+-------------------------------+----------------------+----------------------+
| 4 GeForce GTX 1070 Off | 00000000:06:00.0 Off | N/A |
| 65% 74C P2 141W / 135W | 180MiB / 8114MiB | 91% Default |
+-------------------------------+----------------------+----------------------+
| 5 GeForce GTX 1070 Off | 00000000:07:00.0 Off | N/A |
| 65% 74C P2 123W / 135W | 180MiB / 8114MiB | 90% Default |
Thu Sep 14 15:53:00 2017
+-----------------------------------------------------------------------------+
| NVIDIA-SMI 384.69 Driver Version: 384.69 |
|-------------------------------+----------------------+----------------------+
| GPU Name Persistence-M| Bus-Id Disp.A | Volatile Uncorr. ECC |
| Fan Temp Perf Pwr:Usage/Cap| Memory-Usage | GPU-Util Compute M. |
|===============================+======================+======================|
| 0 GeForce GTX 1070 Off | 00000000:01:00.0 On | N/A |
| 65% 74C P2 102W / 135W | 421MiB / 8113MiB | 94% Default |
+-------------------------------+----------------------+----------------------+
| 1 GeForce GTX 1070 Off | 00000000:02:00.0 Off | N/A |
| 65% 71C P2 133W / 135W | 180MiB / 8114MiB | 84% Default |
+-------------------------------+----------------------+----------------------+
| 2 GeForce GTX 1070 Off | 00000000:03:00.0 Off | N/A |
| 65% 68C P2 120W / 135W | 180MiB / 8114MiB | 97% Default |
+-------------------------------+----------------------+----------------------+
| 3 GeForce GTX 1070 Off | 00000000:05:00.0 Off | N/A |
| 65% 69C P2 112W / 135W | 180MiB / 8114MiB | 96% Default |
+-------------------------------+----------------------+----------------------+
| 4 GeForce GTX 1070 Off | 00000000:06:00.0 Off | N/A |
| 65% 74C P2 141W / 135W | 180MiB / 8114MiB | 91% Default |
+-------------------------------+----------------------+----------------------+
| 5 GeForce GTX 1070 Off | 00000000:07:00.0 Off | N/A |
| 65% 74C P2 123W / 135W | 180MiB / 8114MiB | 90% Default |
Another question.
Is it possible to use multi algo switch from this link https://miningpoolhub.com/index.php?page=api&action=getautoswitchingandprofitsstatistics
instead of coin switch ?
Multi algo will switch coins based on their profits without stopping minner,
For example if mining zcash and zclassic goes more profitable it switches within the pool, and miner wont get restart...
I have rare occasion were it adds html code in front of the 1bash on updating via ssh pastebin.
Only very rare but it forces my rig to go into error though. This requires manual fix each time
Only very rare but it forces my rig to go into error though. This requires manual fix each time
Anyone tested this distro with the Asrock H110 Pro BTC+ ?
All I get is a purple screen followed by the Ubuntu logo then a black screen and the USB key flashing forever. Tried 3 different USB drive same problem with one and the other one gives me a grub error.
All I get is a purple screen followed by the Ubuntu logo then a black screen and the USB key flashing forever. Tried 3 different USB drive same problem with one and the other one gives me a grub error.
Code:
Quote
Posted by: VoskCoin
Insert Quote
I connected to the rig via ssh . . but I don't understand what to do after that? I followed the guide I quoted on the last page but it is not working for me?
I'm basically stuck @ this point
Insert Quote
I connected to the rig via ssh . . but I don't understand what to do after that? I followed the guide I quoted on the last page but it is not working for me?
I'm basically stuck @ this point
just type following :
Code:
screen -ls
if you are mining, normaly, you should see 3 jobs :
1) the miner
2) temp (assuming temp supervision is on yes in your bash file)
3) watchdog (assuming wdog supervision is on yes in your bash file)
to see each job type the following :
Code:
screen -r miner
Code:
ctrl + a + d
same for the other jobs
Code:
screen -r temp
Code:
ctrl + a + d
Code:
screen -r wdog
Code:
ctrl + a + d
then type :
Code:
exit
if you want to change your bash file, just type :
Code:
nano 1bash
then ctrl + x to close nano
if you change your bash file, you need to kill the miner
so for that, just type :
Code:
pkill -e miner
after some seconds, your mining process restart by itself
to see if all working ok, just type :
Code:
screen -ls
Regards.
both of those commands just leave me with this?
@damNmad
Thanx for your reply.
Now all working fine ...
After some minutes I have >750 sol/s per GPU. Is it a good number for a gtx1080ti ?
I probably need to twicking powerlimit / cc / cm ...
By the way, powerlimit is a watt number but I just don't know if cc and/or cm are for Mhz or % ?
What's your favorite overclocking or dowclocking numbers (powerlimit / cc / cm) for a MSI Geforce gtx1080ti Gaming OC ?
In advance, thanks for your help.
_S_C_
Thanx for your reply.
Quote
It has to go like this:
Worker is what you add on suprnova portal
Code:
ZEN_WORKER="gaol"
Address is your username for logging into suprnova portal
Code:
ZEN_ADDRESS="gaol"
Worker is what you add on suprnova portal
Code:
ZEN_WORKER="gaol"
Address is your username for logging into suprnova portal
Code:
ZEN_ADDRESS="gaol"
Now all working fine ...
After some minutes I have >750 sol/s per GPU. Is it a good number for a gtx1080ti ?
I probably need to twicking powerlimit / cc / cm ...
By the way, powerlimit is a watt number but I just don't know if cc and/or cm are for Mhz or % ?
What's your favorite overclocking or dowclocking numbers (powerlimit / cc / cm) for a MSI Geforce gtx1080ti Gaming OC ?
In advance, thanks for your help.
_S_C_
Glad it worked.
Speaking of OC's , I only have 1 rig, which has only 1060's.
I can suggest the best for it but not much about 1080 TBH.
nvOC doesn't use %
I would suggest to try 80% of your power limit, my 1060 power limit is 120 and 80% of it is 96.
Core clock, fullzero suggested me in the beginning to increase 10 at a time until it crashes.
Once you find the stable CC - core clock then increase the MC - memory clock 50 at a time until you see the number of sols stable
This is just my illustration from my experience of 1060. If I were you, I would Google first and try what people suggesting, there are lots of topics about this
Tip: Every algorithm and every coin is different, so you need to change it depending on algorithm/coin you mine.
PS: Welcome to the Jungle
@damNmad
Thanx for your reply.
Now all working fine ...
After some minutes I have >750 sol/s per GPU. Is it a good number for a gtx1080ti ?
I probably need to twicking powerlimit / cc / cm ...
By the way, powerlimit is a watt number but I just don't know if cc and/or cm are for Mhz or % ?
What's your favorite overclocking or dowclocking numbers (powerlimit / cc / cm) for a MSI Geforce gtx1080ti Gaming OC ?
In advance, thanks for your help.
_S_C_
I use the stock settings for core / mem -- I need to fine tune this further , with a PL of 200 ~700 sols ~3.5 sols per wattThanx for your reply.
Quote
It has to go like this:
Worker is what you add on suprnova portal
Code:
ZEN_WORKER="gaol"
Address is your username for logging into suprnova portal
Code:
ZEN_ADDRESS="gaol"
Worker is what you add on suprnova portal
Code:
ZEN_WORKER="gaol"
Address is your username for logging into suprnova portal
Code:
ZEN_ADDRESS="gaol"
Now all working fine ...
After some minutes I have >750 sol/s per GPU. Is it a good number for a gtx1080ti ?
I probably need to twicking powerlimit / cc / cm ...
By the way, powerlimit is a watt number but I just don't know if cc and/or cm are for Mhz or % ?
What's your favorite overclocking or dowclocking numbers (powerlimit / cc / cm) for a MSI Geforce gtx1080ti Gaming OC ?
In advance, thanks for your help.
_S_C_
https://luckpool.org/workers/znWcPtNkPCj6VfLRfMhf6i44DvHoeEfNbcd
/
https://zcash.flypool.org/miners/t1WRoxHVh8vhDJxAr6vpP4zzj3xHGF9ZbgQ
thanks for your reply above, will try it now
Code:
Quote
Posted by: VoskCoin
Insert Quote
I connected to the rig via ssh . . but I don't understand what to do after that? I followed the guide I quoted on the last page but it is not working for me?
I'm basically stuck @ this point
Insert Quote
I connected to the rig via ssh . . but I don't understand what to do after that? I followed the guide I quoted on the last page but it is not working for me?
I'm basically stuck @ this point
just type following :
Code:
screen -ls
if you are mining, normaly, you should see 3 jobs :
1) the miner
2) temp (assuming temp supervision is on yes in your bash file)
3) watchdog (assuming wdog supervision is on yes in your bash file)
to see each job type the following :
Code:
screen -r miner
Code:
ctrl + a + d
same for the other jobs
Code:
screen -r temp
Code:
ctrl + a + d
Code:
screen -r wdog
Code:
ctrl + a + d
then type :
Code:
exit
if you want to change your bash file, just type :
Code:
nano 1bash
then ctrl + x to close nano
if you change your bash file, you need to kill the miner
so for that, just type :
Code:
pkill -e miner
after some seconds, your mining process restart by itself
to see if all working ok, just type :
Code:
screen -ls
Regards.
I connected to the rig via ssh . . but I don't understand what to do after that? I followed the guide I quoted on the last page but it is not working for me?
I'm basically stuck @ this point
I'm basically stuck @ this point
Jump to: