Author

Topic: [Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free) - page 438. (Read 835481 times)

newbie
Activity: 2
Merit: 0
 Cry

Hey Guys!
I have a Asrock Z170 Extreme6+ mobo and tried to use simplemining, both versions (z170 and regular) but I keep getting this error:

ACPI Error: [PGRT] Namespace lookup failure, AE_NOT_FOUND (20170119/psargs-383)
ACPI Error: Method parse/execution failed [\_GPE._L6F] (Node ffff99c2a14df4d8), AE_NOT_FOUND (20170119/psparse-543)
ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L6F] (20170119/evgpe-646)

My mobo have the last bios installed.

It's impossible to use console because this messages are flooding  Cry

Any idea how to fix?Huh

Thx a lot!
sr. member
Activity: 1414
Merit: 487
YouTube.com/VoskCoin
Do I have to make the USB bootable? Do the instructions provided on site not include that within the hdd program
the tool is doing everything for you ... just load the image as source and select the target device ... after flash its ready to use.
I was unable to boot it on the panda from bios though?

mh dunno what panda uses or how it works ... for a normal mining rig with normal motherboard it should work with enabled usb boot.

Trying again on a new USB, tytanick says he does not support pandaminer so if this doesnt work i'm SOL xD

I changed boot to it, and it still boots windows, even disabled the other 2 boot options, still booted windows
newbie
Activity: 39
Merit: 0
Hey Guys,

I need help with my overclock settings in SMOS.

Currently I have the following cards.

12x 480rx 8GB
6x 570rx 4GB.

Below are the OC values I set in SMOS.
Powerstage is set to 5.

The systems are stable and have no issue.  However most posts I read say I should be getting roughly 180MHS or 30+ MHS. 

Eth1   ON(0)   166.61 MH/s 0 H/s   71 70 54 50 54 56 ℃
55 48 48 48 48 48 %   1202 1202 1125 1150 1125 1125 (5)
2100 2100 2080 2100 2080 2080       More

Eth2   ON(1)   161.72 MH/s 0 H/s   59 54 53 52 62 54 ℃
47 47 47 47 47 47 %   1100 1145 1145 1100 1145 1100 (5)
2080 2080 2100 2080 2080 2080       More

Eth3   ON(2)   142.49 MH/s 0 H/s   54 56 68 53 49 53 ℃
61 61 61 61 61 61 %   1150 1150 1167 1150 1150 1150 (5)
2080 2080 2080 2080 2080 2080


Anyone have any ideas?  Thank you.

Increase power stage to 7


I tried changing the power stage.  There is no change.  Do my mem clocks need to be changed?  I'm more concerned about the 6 570s that only hash at 142.  I would like to get to 160 if possible.

thanks,
newbie
Activity: 11
Merit: 0
I sometimes get these errors from Claymore and it just hangs there.

WATCHDOG: GPU 2 hangs in OpenCL call, exit
WATCHDOG: GPU 2 hangs in OpenCL call, exit
Binary file (standard input) matches

Had to reboot rig or even hardware reset to get it up again.

Tried -r 0 option but doesn't seem to work. Please advise. Thanks
newbie
Activity: 11
Merit: 0
Hey Guys,

I need help with my overclock settings in SMOS.

Currently I have the following cards.

12x 480rx 8GB
6x 570rx 4GB.

Below are the OC values I set in SMOS.
Powerstage is set to 5.

The systems are stable and have no issue.  However most posts I read say I should be getting roughly 180MHS or 30+ MHS. 

Eth1   ON(0)   166.61 MH/s 0 H/s   71 70 54 50 54 56 ℃
55 48 48 48 48 48 %   1202 1202 1125 1150 1125 1125 (5)
2100 2100 2080 2100 2080 2080       More

Eth2   ON(1)   161.72 MH/s 0 H/s   59 54 53 52 62 54 ℃
47 47 47 47 47 47 %   1100 1145 1145 1100 1145 1100 (5)
2080 2080 2100 2080 2080 2080       More

Eth3   ON(2)   142.49 MH/s 0 H/s   54 56 68 53 49 53 ℃
61 61 61 61 61 61 %   1150 1150 1167 1150 1150 1150 (5)
2080 2080 2080 2080 2080 2080


Anyone have any ideas?  Thank you.

Increase power stage to 7
member
Activity: 98
Merit: 10
Do I have to make the USB bootable? Do the instructions provided on site not include that within the hdd program
the tool is doing everything for you ... just load the image as source and select the target device ... after flash its ready to use.
I was unable to boot it on the panda from bios though?

mh dunno what panda uses or how it works ... for a normal mining rig with normal motherboard it should work with enabled usb boot.
sr. member
Activity: 1414
Merit: 487
YouTube.com/VoskCoin
Do I have to make the USB bootable? Do the instructions provided on site not include that within the hdd program
the tool is doing everything for you ... just load the image as source and select the target device ... after flash its ready to use.
I was unable to boot it on the panda from bios though?
member
Activity: 98
Merit: 10
Do I have to make the USB bootable? Do the instructions provided on site not include that within the hdd program
the tool is doing everything for you ... just load the image as source and select the target device ... after flash its ready to use.
sr. member
Activity: 1414
Merit: 487
YouTube.com/VoskCoin
Do I have to make the USB bootable? Do the instructions provided on site not include that within the hdd program
member
Activity: 98
Merit: 10
Guys can anyone give an example of an ethereum & sia  combined mining config?

I am really at a loss ...

thats what i do with EXP+DCR...

Code:
-wd 1 -r 1 -epool stratum+tcp://exp-eu.dwarfpool.com:8018 -ewal 0x8cc1b286b0da5187d59c2f648b5d30a111ee54da/$rigName  -allpools 1 -mport -3333  -allcoins exp  -esm 3 -dpool dcr.suprnova.cc:3252 -dwal eWMzpG4MAYSCnxcBYQEi.rig1 -dpsw x
ETH+SIA is pretty much the same i would say.
member
Activity: 72
Merit: 10
Guys can anyone give an example of an ethereum & sia  combined mining config?

I am really at a loss ...
newbie
Activity: 11
Merit: 0
is it okay to have incorrect shares?
newbie
Activity: 39
Merit: 0
Hey Guys,

I need help with my overclock settings in SMOS.

Currently I have the following cards.

12x 480rx 8GB
6x 570rx 4GB.

Below are the OC values I set in SMOS.
Powerstage is set to 5.

The systems are stable and have no issue.  However most posts I read say I should be getting roughly 180MHS or 30+ MHS. 

Eth1   ON(0)   166.61 MH/s 0 H/s   71 70 54 50 54 56 ℃
55 48 48 48 48 48 %   1202 1202 1125 1150 1125 1125 (5)
2100 2100 2080 2100 2080 2080       More

Eth2   ON(1)   161.72 MH/s 0 H/s   59 54 53 52 62 54 ℃
47 47 47 47 47 47 %   1100 1145 1145 1100 1145 1100 (5)
2080 2080 2100 2080 2080 2080       More

Eth3   ON(2)   142.49 MH/s 0 H/s   54 56 68 53 49 53 ℃
61 61 61 61 61 61 %   1150 1150 1167 1150 1150 1150 (5)
2080 2080 2080 2080 2080 2080


Anyone have any ideas?  Thank you.
newbie
Activity: 4
Merit: 0
discord works too (https://discordapp.com)
Looks nice but something more personalized.
Also i dont see voice chat with all the trolls in the world Cheesy


Telegram maybe nice fit with group or channel and group
full member
Activity: 274
Merit: 101
discord works too (https://discordapp.com)
Looks nice but something more personalized.
Also i dont see voice chat with all the trolls in the world Cheesy


Telegram maybe?
full member
Activity: 322
Merit: 233
anychance this will become compatible with the NVIDIA crowd in the future?

I hope for a nvidia version too. I currently got an amd rx580 order pending with a 3-4 weeks lead time. (If all goes well)
So a Nvidia version would really be nice for some diversity.

Also you do not need to release a nvidia right now we can wait a few days  Grin
No but if you do, take your time. 6 months? we can survive

Thank you

sad face......
full member
Activity: 125
Merit: 100
Canadian Miner Passing Through~~
anychance this will become compatible with the NVIDIA crowd in the future?

I hope for a nvidia version too. I currently got an amd rx580 order pending with a 3-4 weeks lead time. (If all goes well)
So a Nvidia version would really be nice for some diversity.

Also you do not need to release a nvidia right now we can wait a few days  Grin
No but if you do, take your time. 6 months? we can survive

Thank you
member
Activity: 98
Merit: 10
Fuck, why does humans need to sleep. I am loosing 8 hours every day Cheesy
I am guys stuck with number of emails in my inbox Tongue
Also i will start working on nvidia support becasue i just bought 3 of those for testing and becasue AMD are not available.
Lets see how it goes.
full member
Activity: 322
Merit: 233
anychance this will become compatible with the NVIDIA crowd in the future?
member
Activity: 98
Merit: 10
discord have voicechat Wink

temporary (or if u like permantly) created "server" for SMOS: https://discord.gg/hgh5Uwe

btw. you can write bots on discord using node.js ... for example a bot which can show ur stats or something like Tongue
Jump to: