If you want to update Values in t3 with a 1660 Super
Equihash 125 (PowLimit 70%+ Core 120Mhz + Mem 900Mhz) = 27-28 Sol/s <90W
- Equihash 144 (PowLimit 70%+ Core 120Mhz + Mem 900Mhz) = 41-42 Sol/s with Miniz <90W
- Equihash 192 (PowLimit 70% + Core 120Mhz + Mem 800Mhz) = 21.5 -22.5 Sol/s with MiniZ <90W
Topic: miniZ v2.0a Equihash 144,5 125,4 210,9 150,5 192,7 BeamHash3 ProgPoW Ethash CFX - page 30. (Read 60004 times)
May 18, 2020, 03:09:07 PM
May 18, 2020, 02:09:14 PM
thanks for remove alien 
May 18, 2020, 12:16:37 PM
************ miniZ v1.5t2 ************
Number of CUDA[10.0] devices found: 2
Algo: EQ[125,4]
Pool#0: userXXXXX.rigr]
server[zel.2miners.com] port[19090] ssl[yes] pers[ZelProof]
Logging:: file[miniZ.log] period[10] delay[0]
Temp. limit: [75шC]
miniZ<125,4>[03:0:00:2908]: Selecting GPU#0[0] GeForce GTX 1060 3GB
miniZ<125,4>[03:0:00:2908]: Selecting GPU#1[1] GeForce GTX 1060 3GB
[ 0d 0h 0m10s|07:51:09 15/05/2020] S: 0/0 40(39.9)Sol/s 161(161.3)W [zel.2miners.com]
0>GTX 1060 3GB 100% [36шC/30%] 9.57 I/s 20.6(20.6)Sol/s 89( 88.8)W clk=1797MHz mclk=4201MHz Sol/W=0.23
1>GTX 1060 3GB 100% [45шC/30%] 8.73 I/s 19.3(19.3)Sol/s 72( 72.4)W clk=1582MHz mclk=3802MHz Sol/W=0.27
[ 0d 0h 0m20s|07:51:18 15/05/2020] S: 0/0 39(38.6)Sol/s 157(157.4)W [zel.2miners.com]
0>GTX 1060 3GB 100% [39шC/30%] 10.26 I/s 18.9(18.9)Sol/s 84( 84.2)W clk=1746MHz mclk=4201MHz Sol/W=0.22
1>GTX 1060 3GB 100% [47шC/30%] 9.33 I/s 19.7(19.7)Sol/s 73( 73.2)W clk=1582MHz mclk=3802MHz Sol/W=0.27
Number of CUDA[10.0] devices found: 2
Algo: EQ[125,4]
Pool#0: userXXXXX.rigr]
server[zel.2miners.com] port[19090] ssl[yes] pers[ZelProof]
Logging:: file[miniZ.log] period[10] delay[0]
Temp. limit: [75шC]
miniZ<125,4>[03:0:00:2908]: Selecting GPU#0[0] GeForce GTX 1060 3GB
miniZ<125,4>[03:0:00:2908]: Selecting GPU#1[1] GeForce GTX 1060 3GB
[ 0d 0h 0m10s|07:51:09 15/05/2020] S: 0/0 40(39.9)Sol/s 161(161.3)W [zel.2miners.com]
0>GTX 1060 3GB 100% [36шC/30%] 9.57 I/s 20.6(20.6)Sol/s 89( 88.8)W clk=1797MHz mclk=4201MHz Sol/W=0.23
1>GTX 1060 3GB 100% [45шC/30%] 8.73 I/s 19.3(19.3)Sol/s 72( 72.4)W clk=1582MHz mclk=3802MHz Sol/W=0.27
[ 0d 0h 0m20s|07:51:18 15/05/2020] S: 0/0 39(38.6)Sol/s 157(157.4)W [zel.2miners.com]
0>GTX 1060 3GB 100% [39шC/30%] 10.26 I/s 18.9(18.9)Sol/s 84( 84.2)W clk=1746MHz mclk=4201MHz Sol/W=0.22
1>GTX 1060 3GB 100% [47шC/30%] 9.33 I/s 19.7(19.7)Sol/s 73( 73.2)W clk=1582MHz mclk=3802MHz Sol/W=0.27
Hi Ziv1,
Thanks! Your log was very useful.
We will make our best to make it work for you without losing the t3 version improvements.
Cheers
May 18, 2020, 08:48:29 AM
************ miniZ v1.5t2 ************
Number of CUDA[10.0] devices found: 2
Algo: EQ[125,4]
Pool#0: userXXXXX.rigr]
server[zel.2miners.com] port[19090] ssl[yes] pers[ZelProof]
Logging:: file[miniZ.log] period[10] delay[0]
Temp. limit: [75шC]
miniZ<125,4>[03:0:00:2908]: Selecting GPU#0[0] GeForce GTX 1060 3GB
miniZ<125,4>[03:0:00:2908]: Selecting GPU#1[1] GeForce GTX 1060 3GB
[ 0d 0h 0m10s|07:51:09 15/05/2020] S: 0/0 40(39.9)Sol/s 161(161.3)W [zel.2miners.com]
0>GTX 1060 3GB 100% [36шC/30%] 9.57 I/s 20.6(20.6)Sol/s 89( 88.8)W clk=1797MHz mclk=4201MHz Sol/W=0.23
1>GTX 1060 3GB 100% [45шC/30%] 8.73 I/s 19.3(19.3)Sol/s 72( 72.4)W clk=1582MHz mclk=3802MHz Sol/W=0.27
[ 0d 0h 0m20s|07:51:18 15/05/2020] S: 0/0 39(38.6)Sol/s 157(157.4)W [zel.2miners.com]
0>GTX 1060 3GB 100% [39шC/30%] 10.26 I/s 18.9(18.9)Sol/s 84( 84.2)W clk=1746MHz mclk=4201MHz Sol/W=0.22
1>GTX 1060 3GB 100% [47шC/30%] 9.33 I/s 19.7(19.7)Sol/s 73( 73.2)W clk=1582MHz mclk=3802MHz Sol/W=0.27
Number of CUDA[10.0] devices found: 2
Algo: EQ[125,4]
Pool#0: userXXXXX.rigr]
server[zel.2miners.com] port[19090] ssl[yes] pers[ZelProof]
Logging:: file[miniZ.log] period[10] delay[0]
Temp. limit: [75шC]
miniZ<125,4>[03:0:00:2908]: Selecting GPU#0[0] GeForce GTX 1060 3GB
miniZ<125,4>[03:0:00:2908]: Selecting GPU#1[1] GeForce GTX 1060 3GB
[ 0d 0h 0m10s|07:51:09 15/05/2020] S: 0/0 40(39.9)Sol/s 161(161.3)W [zel.2miners.com]
0>GTX 1060 3GB 100% [36шC/30%] 9.57 I/s 20.6(20.6)Sol/s 89( 88.8)W clk=1797MHz mclk=4201MHz Sol/W=0.23
1>GTX 1060 3GB 100% [45шC/30%] 8.73 I/s 19.3(19.3)Sol/s 72( 72.4)W clk=1582MHz mclk=3802MHz Sol/W=0.27
[ 0d 0h 0m20s|07:51:18 15/05/2020] S: 0/0 39(38.6)Sol/s 157(157.4)W [zel.2miners.com]
0>GTX 1060 3GB 100% [39шC/30%] 10.26 I/s 18.9(18.9)Sol/s 84( 84.2)W clk=1746MHz mclk=4201MHz Sol/W=0.22
1>GTX 1060 3GB 100% [47шC/30%] 9.33 I/s 19.7(19.7)Sol/s 73( 73.2)W clk=1582MHz mclk=3802MHz Sol/W=0.27
May 16, 2020, 02:19:10 PM
************ miniZ v1.5t3 ************
Number of CUDA[10.0] devices found: 2
Algo: EQ[125,4]
Pool#0: user[XXXXX.rigr]
server[zel.2miners.com] port[9090] ssl[no] pers[ZelProof]
Logging:: file[miniZ.log] period[10] delay[0]
Temp. limit: [75шC]
miniZ<125,4>[00:0:00:2906]: Selecting GPU#0[0] GeForce GTX 1060 3GB
miniZ<125,4>[00:0:00:2906]: Selecting GPU#1[1] GeForce GTX 1060 3GB
out of memory::CUDA: failed to alloc memory for target
Version t2 works.
Number of CUDA[10.0] devices found: 2
Algo: EQ[125,4]
Pool#0: user[XXXXX.rigr]
server[zel.2miners.com] port[9090] ssl[no] pers[ZelProof]
Logging:: file[miniZ.log] period[10] delay[0]
Temp. limit: [75шC]
miniZ<125,4>[00:0:00:2906]: Selecting GPU#0[0] GeForce GTX 1060 3GB
miniZ<125,4>[00:0:00:2906]: Selecting GPU#1[1] GeForce GTX 1060 3GB
out of memory::CUDA: failed to alloc memory for target
Version t2 works.
Hi Ziv1,
There was another person with the same issue.
Thanks a lot for the feedback and for the information.
Could you also paste here the same information but from the previous version t2? This can help too.
The issue will be solved in the next version.
Cheers
May 15, 2020, 04:56:52 AM
************ miniZ v1.5t3 ************
Number of CUDA[10.0] devices found: 2
Algo: EQ[125,4]
Pool#0: user[XXXXX.rigr]
server[zel.2miners.com] port[9090] ssl[no] pers[ZelProof]
Logging:: file[miniZ.log] period[10] delay[0]
Temp. limit: [75шC]
miniZ<125,4>[00:0:00:2906]: Selecting GPU#0[0] GeForce GTX 1060 3GB
miniZ<125,4>[00:0:00:2906]: Selecting GPU#1[1] GeForce GTX 1060 3GB
out of memory::CUDA: failed to alloc memory for target
Version t2 works.
Number of CUDA[10.0] devices found: 2
Algo: EQ[125,4]
Pool#0: user[XXXXX.rigr]
server[zel.2miners.com] port[9090] ssl[no] pers[ZelProof]
Logging:: file[miniZ.log] period[10] delay[0]
Temp. limit: [75шC]
miniZ<125,4>[00:0:00:2906]: Selecting GPU#0[0] GeForce GTX 1060 3GB
miniZ<125,4>[00:0:00:2906]: Selecting GPU#1[1] GeForce GTX 1060 3GB
out of memory::CUDA: failed to alloc memory for target
Version t2 works.
May 11, 2020, 04:56:27 PM
I have two different pools in same .bat file. Last night when zerg crashed, miniz switched to second pool, but it newer switched back to zerg that i have at first position. Is there any way or some command to make it reconnect to first/main pool after it become available again? Thanks.
Hi somaton,The miner should switch back when the first pool is back again. It may not be imediately but it usually does not take long.
We will try to reproduce the issue.
Thank you for letting us know!
Cheers
May 11, 2020, 08:09:04 AM
I have two different pools in same .bat file. Last night when zerg crashed, miniz switched to second pool, but it newer switched back to zerg that i have at first position. Is there any way or some command to make it reconnect to first/main pool after it become available again? Thanks.
May 10, 2020, 08:32:58 AM
150,5 optimizations (OC kernels?) would be cool 
Hi impynick, 150,5 already has oc1 implemented. Have you tried it already? It tends to improve performance when power is limited, but it depends on OC settings and GPU.
You can see which GPUs support oc1 in "Argument options for tuning performance and efficiency: --oc1, --oc2, and --ocX" FAQ page.
However, in the future we will work on further improving this feature for 150,5.
Thank you for the feedback!
Cheers
May 10, 2020, 08:30:33 AM
Got this with 1.5t3, but only once, what that means? no crashes, no any other messages.
[ERROR ] Socket write error2.
write: No error
Hi somaton,[ERROR ] Socket write error2.
write: No error
Thank you for your question.
The error you report is more like a warning. It seems there was a problem communicating with the pool.
If there are no crashes or other warnings that means the miner managed to proceed with no further problems.
We left this warning because it may help in some cases, for debugging.
There is nothing to worry about.
Cheers
May 10, 2020, 06:26:59 AM
150,5 optimizations (OC kernels?) would be cool
May 10, 2020, 04:24:24 AM
Got this with 1.5t3, but only once, what that means? no crashes, no any other messages.
[ERROR ] Socket write error2.
write: No error
[ERROR ] Socket write error2.
write: No error
May 08, 2020, 06:37:57 PM
Hi everyone,
Thank you for your patience! A new version miniZ v1.5t3 is out!
* 125,4 (ZEL): major improvements for various GPUs. Up to ~11% (1660 Ti) and ~8% (RTX 2070).
* 150,5,3 (BEAM): major improvements up to ~3-4% for GTX 1660 Ti, RTX 2070. Minor for other GPUs.
* Better pool connection handling.
* Added --ocX option for automatic tunning of the best kernel for your GPU and OC settings. (125,4 and 150,5,3 only)
* Added macros to log file name: @algo@, @date@, @version@, @user@, and @host@.
Write for ex. --logfile @algo@@date@@[email protected] in the command line.
* Improved stability.
Download miniZ v1.5t3 here.
Few notes:
* When adjusting your GPUs OC settings check if your GPU supports oc1/oc2 (FAQ ). It may boost your performance a little.
--oc1/oc2 changed for some GPUs, for 125,4 (ZEL) and 150,5,3 (BEAM) in the new version.
In this new release we added an option for automatic tunning of the best kernel for your GPU: --ocX option. At the moment for ZEL and Beam only.
For updated and more detailed information read the specific topic on FAQ page.
* On Download page you can find Cuda 10 and Cuda 8 versions (Linux and Windows).
For Turing architectures (16xx series and RTX) you need to use Cuda 10.0 versions.
* We are considering to drop Cuda 8 support in future versions. *
For additional information check our Usage or FAQ pages.
Let us know how it goes!
Happy mining!
Thank you for your patience! A new version miniZ v1.5t3 is out!
* 125,4 (ZEL): major improvements for various GPUs. Up to ~11% (1660 Ti) and ~8% (RTX 2070).
* 150,5,3 (BEAM): major improvements up to ~3-4% for GTX 1660 Ti, RTX 2070. Minor for other GPUs.
* Better pool connection handling.
* Added --ocX option for automatic tunning of the best kernel for your GPU and OC settings. (125,4 and 150,5,3 only)
* Added macros to log file name: @algo@, @date@, @version@, @user@, and @host@.
Write for ex. --logfile @algo@@date@@[email protected] in the command line.
* Improved stability.
Download miniZ v1.5t3 here.
Few notes:
* When adjusting your GPUs OC settings check if your GPU supports oc1/oc2 (FAQ ). It may boost your performance a little.
--oc1/oc2 changed for some GPUs, for 125,4 (ZEL) and 150,5,3 (BEAM) in the new version.
In this new release we added an option for automatic tunning of the best kernel for your GPU: --ocX option. At the moment for ZEL and Beam only.
For updated and more detailed information read the specific topic on FAQ page.
* On Download page you can find Cuda 10 and Cuda 8 versions (Linux and Windows).
For Turing architectures (16xx series and RTX) you need to use Cuda 10.0 versions.
* We are considering to drop Cuda 8 support in future versions. *
For additional information check our Usage or FAQ pages.
Let us know how it goes!
Happy mining!
May 08, 2020, 06:10:58 PM
We have been working on the new release and are currenlty making final testing.
Hopefully it will be out within two days.
That's great.
Will you add Kawpow algo?
Hi styleshifter,
thank you for your interest!
Kawpow is not Equihash but we may consider it in the future.
Cheers
May 06, 2020, 02:30:07 AM
We have been working on the new release and are currenlty making final testing.
Hopefully it will be out within two days.
That's great.
Will you add Kawpow algo?
May 05, 2020, 07:21:33 PM
Hi everyone,
We hope you are all doing well.
Sorry for the long silence.
We have been working on the new release and are currenlty making final testing.
Hopefully it will be out within two days.
Cheers
We hope you are all doing well.
Sorry for the long silence.
We have been working on the new release and are currenlty making final testing.
Hopefully it will be out within two days.
Cheers
May 05, 2020, 06:58:42 PM
I have trouble using SSL configuration your miner on awesome miner.... can u tell me what command? every pool using SSL I cant configure on awesome miner...
Thanks
Thanks
Hi ayiphelmy,
When you enter the Pool connection URL add ssl:// to the begining.
Examples
ssl://beam-us.leafpool.com:3333
ssl://btg.2miners.com:14040
Let us know if this helped.
Thank you for posting this question, this may be usefull for other miners too!
Cheers
May 03, 2020, 06:03:58 AM
I have trouble using SSL configuration your miner on awesome miner.... can u tell me what command? every pool using SSL I cant configure on awesome miner...
Thanks
Thanks
April 20, 2020, 02:24:27 AM
Hi miniZ
I hope that you and yours are well this restrictive time and that you are keeping busy (if in lockdown)
I have a small issue similar to the user above, will DM you, if I may.
thanks.
thanks a lot for the information.
Could you also paste here a little bit of the log just before the crash?
Cheers
I hope that you and yours are well this restrictive time and that you are keeping busy (if in lockdown)
I have a small issue similar to the user above, will DM you, if I may.
thanks.
was mining Atomis @ icemining, not sure if telem was on or not, was on 1070, 2070, 1080ti.
Hi fistsofgod,thanks a lot for the information.
Could you also paste here a little bit of the log just before the crash?
Cheers
Hi rgsnedds,
Thank you for your message. We hope you and yours are well too.
We have been preparing a new miniZ version with modifications that may deal with what you and fistsofgod have been experiencing.
However, do let us know if you continue to have this problem with the new version.
We expect it to be out by the end of this week.
Cheers
fantastic news. will watch out for this.
April 19, 2020, 06:09:45 PM
Hi miniZ
I hope that you and yours are well this restrictive time and that you are keeping busy (if in lockdown)
I have a small issue similar to the user above, will DM you, if I may.
thanks.
thanks a lot for the information.
Could you also paste here a little bit of the log just before the crash?
Cheers
I hope that you and yours are well this restrictive time and that you are keeping busy (if in lockdown)
I have a small issue similar to the user above, will DM you, if I may.
thanks.
was mining Atomis @ icemining, not sure if telem was on or not, was on 1070, 2070, 1080ti.
Hi fistsofgod,thanks a lot for the information.
Could you also paste here a little bit of the log just before the crash?
Cheers
Hi rgsnedds,
Thank you for your message. We hope you and yours are well too.
We have been preparing a new miniZ version with modifications that may deal with what you and fistsofgod have been experiencing.
However, do let us know if you continue to have this problem with the new version.
We expect it to be out by the end of this week.
Cheers
Jump to: