Topic: miniZ v2.0a Equihash 144,5 125,4 210,9 150,5 192,7 BeamHash3 ProgPoW Ethash CFX - page 50. (Read 59613 times)

How do I make miner restart after gpu failure? It simply exits and thats it

I tried mining beam on nicehash with 1060 3gb on hiveos and get couldn't allocate 2940 of memory but have no issues with miner I would like to run miniz seems like the rates are better

I get very high LA on lower PL. On 70 it's normal, but on 60 it's above 6 again.
Can you look into it?

Hi miniZ dev.

Been running 1.3n5 version for a few days, and it happens that miner just crashed without error after a 1 day of mining, last time it was after 1 day and 6 hours.

Same settings for all cards.
PL 72%
core +180
mem +360

3n4 much more stable than 3n5

I tried mining beam on nicehash with 1060 3gb on hiveos and get couldn't allocate 2940 of memory but have no issues with miner I would like to run miniz seems like the rates are better

[ 1d 6h 3m00s] S:17342/0 167(165.9)Sol/s 817(826.5)W [beam-eu.sparkpool.com]
 0>GTX 1080 Ti ` 100% [60°C/46%] 18.87 I/s 38.3(37.7)Sol/s 175(180.5)W clk=1506MHz mclk=5865MHz Sol/W=0.21
 1>GTX 1080    ` 100% [61°C/47%] 12.78 I/s 25.7(25.4)Sol/s 126(129.0)W clk=1468MHz mclk=5346MHz Sol/W=0.20
 2>GTX 1080    ` 100% [59°C/45%] 12.85 I/s 24.9(25.4)Sol/s 129(129.1)W clk=1518MHz mclk=5346MHz Sol/W=0.20
 3>GTX 1080    ` 100% [59°C/45%] 13.04 I/s 25.9(25.8)Sol/s 129(129.0)W clk=1569MHz mclk=5346MHz Sol/W=0.20
 4>GTX 1080    ` 100% [55°C/43%] 12.86 I/s 26.1(25.6)Sol/s 133(129.3)W clk=1493MHz mclk=5346MHz Sol/W=0.20
 5>GTX 1080    ` 100% [60°C/46%] 12.95 I/s 25.5(25.7)Sol/s 125(129.2)W clk=1493MHz mclk=5346MHz Sol/W=0.20

Waiting for 0 seconds, press a key to continue ...
************ miniZ v1.3n5 ************
Number of CUDA devices found: 6
miniZ,150,5[8:1:00]: Selecting GPU#0[0] GeForce GTX 1080 Ti
miniZ,150,5[4:1:00]: Selecting GPU#1[1] GeForce GTX 1080
miniZ,150,5[4:1:00]: Selecting GPU#2[2] GeForce GTX 1080
miniZ,150,5[4:1:00]: Selecting GPU#3[3] GeForce GTX 1080
miniZ,150,5[4:1:00]: Selecting GPU#4[4] GeForce GTX 1080
miniZ,150,5[4:1:00]: Selecting GPU#5[5] GeForce GTX 1080
Algo:           EQ[150,5]
Pool#0:         user[14794c3bea134979c40773495734d655e561224a4e5bc3600d81886457223e0c5.rig0] server[beam-eu.sparkpool.com] port[2222] ssl[yes] pers[Beam-PoW]
Pool#1:         user[2fdc7c988d1a2181a191b5c4290c018656098094a9a12d0ca94bafa914bdb75c7.rig0] server[beam-eu.leafpool.com] port[4444] ssl[yes] pers[Beam-PoW]
Optimisation:   oc1[1 2 3 4 5] oc2[0]
Temp. limit:    [70°C]
[ 0d 0h 0m09s] S:  1/0 141(141.0)Sol/s 400(400.4)W [beam-eu.sparkpool.com]
 0>GTX 1080 Ti ` 100% [56°C/43%] 16.67 I/s 30.2(30.2)Sol/s  83( 82.9)W clk=2050MHz mclk=5865MHz Sol/W=0.36
 1>GTX 1080    ` 100% [55°C/44%] 11.50 I/s 20.9(20.9)Sol/s 133(132.9)W clk=1480MHz mclk=5346MHz Sol/W=0.16
 2>GTX 1080    ` 100% [53°C/43%] 11.19 I/s 20.9(20.9)Sol/s  45( 45.5)W clk=1771MHz mclk=5346MHz Sol/W=0.46
 3>GTX 1080    ` 100% [52°C/43%] 11.35 I/s 21.4(21.4)Sol/s  45( 45.2)W clk=1771MHz mclk=5346MHz Sol/W=0.47
 4>GTX 1080    ` 100% [48°C/41%] 11.19 I/s 22.0(22.0)Sol/s  44( 43.6)W clk=1607MHz mclk=5346MHz Sol/W=0.50
 5>GTX 1080    ` 100% [53°C/43%]*11.23 I/s 20.8(20.8)Sol/s  50( 50.3)W clk=2062MHz mclk=5346MHz Sol/W=0.41

Finally! miniZ has been added to HiveOS.

Very interesting.  I upgraded also and actually saw zero drop in wattage on my 8-card rig.  I know, I know, it's because i'm using Win10!      Which version did you switch from?

just switched to 1.3n5 and found a decrease of 40w across the rig with no drop is hashrate. amazeballs!

Good day good day, miniZ. I've been happily running v1.2m on 144_5 for weeks now and have seen all the updates come along without any mention of speed upgrades for 144_5. Any reason I should upgrade as I see these upgrades have been targeted to other algos…. Thanks again for the good work.