M's Miner (Ant/SP) Monitor v5.2: alerts,auto/mass/scheduled reboot/mobile miner - page 21.

mdude77

legendary

Activity: 1540

Merit: 1001

Quote from: opentoe on November 30, 2014, 04:15:43 PM

Thanks, nice utility. I have a quick question. It found both my C1's fine. I named them, click save and then went to the AntOutput page and it is grabbing data already but I never put in a password in the config area. I did change the PW to a different one. How is the program accessing the C1's without a password? I only changed the WebUI password, I left the SSH password default. Is that how it is getting the data?

I think the default is
user - root
pw - admin

Hello, the SSH password is only needed for SSH utils like rebooting or configuring pools. Everything else can be done via the API across the network, as you observed.

Note that there isn't any web support for C1s currently. Not sure if I'll add it or not.

M

opentoe

legendary

Activity: 1274

Merit: 1000

Personal text my ass....

Thanks, nice utility. I have a quick question. It found both my C1's fine. I named them, click save and then went to the AntOutput page and it is grabbing data already but I never put in a password in the config area. I did change the PW to a different one. How is the program accessing the C1's without a password? I only changed the WebUI password, I left the SSH password default. Is that how it is getting the data?

I think the default is
user - root
pw - admin

mdude77

legendary

Activity: 1540

Merit: 1001

Here's version 3.8.

This version adds proper support for C1s, and fixes some minor issues for the Ant scanning logic.

Also, note that today I'm selling my last S1. After this version there's no guarantee S1s will work properly (but they should).

Download link: MAntMonitor38.zip

M

mdude77

legendary

Activity: 1540

Merit: 1001

Quote from: 00pmac00 on November 26, 2014, 02:52:38 PM

I discovered about 10 minutes ago as well 2 of the mners (one of which was the one giving the error) had the same hostname. I doubt that makes a difference, but I havechanged it to what it is supposed to be. I'll let you know how it goes either sometime tonight or when I get up in the morning when I see how its doing.

Thanks. Grin

I set it to reboot every upcoming hour for a few hours in a row to make sure it worked. Hopefully I got it all right this time.

M

00pmac00

newbie

Activity: 59

Merit: 0

I discovered about 10 minutes ago as well 2 of the mners (one of which was the one giving the error) had the same hostname. I doubt that makes a difference, but I havechanged it to what it is supposed to be. I'll let you know how it goes either sometime tonight or when I get up in the morning when I see how its doing.

Thanks. Grin

mdude77

legendary

Activity: 1540

Merit: 1001

Quote from: 00pmac00 on November 26, 2014, 02:12:50 PM

Great I'll test it out right now!!!

But my refresh was set to 300 seconds not 30. You can see the picture that it is showing 266 seconds until next reboot.

Well.. that's what happened. And I read your screenshot wrong.

Regardless it should be fine now.

M

00pmac00

newbie

Activity: 59

Merit: 0

Great I'll test it out right now!!!

But my refresh was set to 300 seconds not 30. You can see the picture that it is showing 266 seconds until next reboot.

mdude77

legendary

Activity: 1540

Merit: 1001

Quote from: 00pmac00 on November 26, 2014, 09:32:04 AM

Good to know, thanks!

Thanks for the screenshots. That helped me figure out what was going on. The problem was my reboot logic wasn't skipping Ants that had a status of "ERROR". So, in your case, since it was refreshing every 30 seconds, one of the Ants hadn't quite finished rebooting when the next scan ran, and then it got stuck.

Here's v3.7 to fix that: MAntMonitor37.zip

M

00pmac00

newbie

Activity: 59

Merit: 0

Good to know, thanks!

mdude77

legendary

Activity: 1540

Merit: 1001

Quote from: 00pmac00 on November 26, 2014, 08:52:40 AM

Hi again, OK I just got back from dropping off my wife, and since my last post that i was turning it on, it received n error on the same IP and is frozen again even with the reboot on error message during refresh disabled.

I just reproduced this. That's good, it means I can fix it.

More to come.

M

00pmac00

newbie

Activity: 59

Merit: 0

Hi again, OK I just got back from dropping off my wife, and since my last post that i was turning it on, it received n error on the same IP and is frozen again even with the reboot on error message during refresh disabled.

mdude77

legendary

Activity: 1540

Merit: 1001

Quote from: 00pmac00 on November 26, 2014, 06:50:55 AM

I should probably mention, that the program was frozen when I got to it, so it's possible the program got the error 44 minutes after reboot. It was non responsive I could click and change everything but it would not refresh anymore. clicking refresh did nothing.

I'll turn it back on now and see how it handles the Noon reboot. I have disabled the option to "Try to reboot ants that get error on refresh"

Aha! That's a good point. It's entirely possible it tried rebooting the Ant that just rebooted and wasn't responding, and got itself in a loop.

Thanks for the feedback. I'll see if I can reproduce this.

M

00pmac00

newbie

Activity: 59

Merit: 0

I should probably mention, that the program was frozen when I got to it, so it's possible the program got the error 44 minutes after reboot. It was non responsive I could click and change everything but it would not refresh anymore. clicking refresh did nothing.

I'll turn it back on now and see how it handles the Noon reboot. I have disabled the option to "Try to reboot ants that get error on refresh"

mdude77

legendary

Activity: 1540

Merit: 1001

Quote from: 00pmac00 on November 26, 2014, 01:32:01 AM

Well I've got a few screen shots to show you on an error thats happening heres the following 3 screen caps, which show a situation 44 minutes after a midnight reboot where one Ant S3(+) gave an error on refresh, (Cap 1 shows this) 2nd cap shows the settings for reboot credentials, 3rd cap shows the program looks like its in an endless 1 second loop with internal error. Let me know if you require anything more from me.

Thanks, this gives me something to work with. The error on refresh could have been as it was rebooting, the next refresh should have shown it normally.

I'll try the config you have and see what happens. I did test a similar setup with about the same number of Ants, actually, and it worked for me, so there must be something I overlooked.

M

00pmac00

newbie

Activity: 59

Merit: 0

Well I've got a few screen shots to show you on an error thats happening heres the following 3 screen caps, which show a situation 44 minutes after a midnight reboot where one Ant S3(+) gave an error on refresh, (Cap 1 shows this) 2nd cap shows the settings for reboot credentials, 3rd cap shows the program looks like its in an endless 1 second loop with internal error. Let me know if you require anything more from me.

Screen Cap 1

Screen Cap 2

Screen Cap 3

For the record when I found the error, the ant that gave an error was up and running fine. That's not to say it didn't drop for a tiny bit of time but my graphs don't reflect a drop in hash rate so if anything happened internally with the miner, it was a very minimal interruption.

mdude77

legendary

Activity: 1540

Merit: 1001

Quote from: 00pmac00 on November 25, 2014, 03:39:53 AM

Just saw the update. replaced v3.5 with it testing it over the next few days before the vacation starts, to reboot every 12 hours.

Great, let me know how it goes!

M

00pmac00

newbie

Activity: 59

Merit: 0

Just saw the update. replaced v3.5 with it testing it over the next few days before the vacation starts, to reboot every 12 hours.

mdude77

legendary

Activity: 1540

Merit: 1001

Here's version 3.6. This adds scheduled reboot functionality, either by time or by uptime.

Download link: MAntMonitor36.zip

M

Moria843

sr. member

Activity: 442

Merit: 250

Found Lost beach - quiet now

I found it and now remember seeing it. Thanks.

mdude77

legendary

Activity: 1540

Merit: 1001

Quote from: Moria843 on November 09, 2014, 02:09:45 PM

Where do I find changes.txt? Looked at beginning of this post but can't find.

It's in the download zip. See my sig.

M

Topic: M's Miner (Ant/SP) Monitor v5.2: alerts,auto/mass/scheduled reboot/mobile miner - page 21. (Read 209500 times)