Is there a way to plot this to a db and chart hash rate over time? It could be a flat file/nosql db but would be handy to view the stats historically.
Not currently. My pool monitor has that, just not by worker.
M
Topic: M's Miner (Ant/SP) Monitor v5.2: alerts,auto/mass/scheduled reboot/mobile miner - page 23. (Read 209561 times)
November 01, 2014, 06:26:44 AM
Not currently. My pool monitor has that, just not by worker.
M
November 01, 2014, 06:23:42 AM
Is there a way to plot this to a db and chart hash rate over time? It could be a flat file/nosql db but would be handy to view the stats historically.
Not currently. My pool monitor has that, just not by worker.
M
November 01, 2014, 04:13:05 AM
Is there a way to plot this to a db and chart hash rate over time? It could be a flat file/nosql db but would be handy to view the stats historically.
October 31, 2014, 07:53:19 PM
Just a heads up - the new S2 firmware is out, Antmonitor works with it if you change the setting from S2 to S3 
Thanks. I'll have to update my S2 and get it working.
M
October 31, 2014, 01:40:30 PM
Just a heads up - the new S2 firmware is out, Antmonitor works with it if you change the setting from S2 to S3
October 30, 2014, 04:38:59 PM
Anyway to add the S4 to work with this?
If past history is any indicator, it should work as an S2.
If someone donates me an S4, I'll be happy to add native support. Otherwise it'll likely be a while...
M
October 30, 2014, 02:31:04 AM
Anyway to add the S4 to work with this?
Add it as an S3. Works for me, mostly.
October 30, 2014, 02:26:36 AM
Anyway to add the S4 to work with this?
October 29, 2014, 07:24:42 PM
Downloaded v3.4. Working great now. Thanks!
Thanks for pointing that out. It's been wrong for quite some time now.
M
October 29, 2014, 07:17:39 PM
Downloaded v3.4. Working great now. Thanks!
October 29, 2014, 06:15:50 PM
Updated to the link in your footer. It still gives the errors below and still shows V3.4b7. Looks like same version.
Also, the test e-mail works, but none of the alert e-mails get through as seen earlier by others and may be why I'm getting the errors below.
Is V3.4b7 in your footer link the most recent full version?
Also, the test e-mail works, but none of the alert e-mails get through as seen earlier by others and may be why I'm getting the errors below.
Is V3.4b7 in your footer link the most recent full version?
Wow. Apparently I didn't update the ZIP file before I pushed it out!
Try it now..
M
October 29, 2014, 06:01:08 PM
Updated to the link in your footer. It still gives the errors below and still shows V3.4b7. Looks like same version.
Also, the test e-mail works, but none of the alert e-mails get through as seen earlier by others and may be why I'm getting the errors below.
Is V3.4b7 in your footer link the most recent full version?
Thanks.
10/29/2014 6:46:15 PM: Initiated Ant refresh
10/29/2014 6:46:15 PM: ERROR when processing alerts on RigS31 (step 11): Column named IPAddress cannot be found.
Parameter name: columnName
10/29/2014 6:46:16 PM: ERROR when processing alerts on RigS34 (step 11): Column named IPAddress cannot be found.
Parameter name: columnName
10/29/2014 6:46:16 PM: ERROR when processing alerts on RigS35 (step 11): Column named IPAddress cannot be found.
Parameter name: columnName
10/29/2014 6:46:16 PM: ERROR when processing alerts on RigS33 (step 11): Column named IPAddress cannot be found.
Parameter name: columnName
10/29/2014 6:46:17 PM: ERROR when processing alerts on Rig5 (step 11): Column named IPAddress cannot be found.
Parameter name: columnName
Also, the test e-mail works, but none of the alert e-mails get through as seen earlier by others and may be why I'm getting the errors below.
Is V3.4b7 in your footer link the most recent full version?
Thanks.
10/29/2014 6:46:15 PM: Initiated Ant refresh
10/29/2014 6:46:15 PM: ERROR when processing alerts on RigS31 (step 11): Column named IPAddress cannot be found.
Parameter name: columnName
10/29/2014 6:46:16 PM: ERROR when processing alerts on RigS34 (step 11): Column named IPAddress cannot be found.
Parameter name: columnName
10/29/2014 6:46:16 PM: ERROR when processing alerts on RigS35 (step 11): Column named IPAddress cannot be found.
Parameter name: columnName
10/29/2014 6:46:16 PM: ERROR when processing alerts on RigS33 (step 11): Column named IPAddress cannot be found.
Parameter name: columnName
10/29/2014 6:46:17 PM: ERROR when processing alerts on Rig5 (step 11): Column named IPAddress cannot be found.
Parameter name: columnName
October 28, 2014, 04:55:49 PM
Using V3.4b7 and all seems to work fine except I get the following errors.
10/28/2014 5:24:19 PM: Initiated Ant refresh
10/28/2014 5:24:22 PM: ERROR when processing alerts on Rig5 (step 11): Column named IPAddress cannot be found.
Parameter name: columnName
10/28/2014 5:24:22 PM: ERROR when processing alerts on RigS35 (step 11): Column named IPAddress cannot be found.
Parameter name: columnName
Have 8 S1 and 5 S3+. Rig5 is an S1; RigS35 is an S3+. Don't get any errors on the other 11 miners. Configured all the same way. Any idea why I get these errors on the 2 miners above?
10/28/2014 5:24:19 PM: Initiated Ant refresh
10/28/2014 5:24:22 PM: ERROR when processing alerts on Rig5 (step 11): Column named IPAddress cannot be found.
Parameter name: columnName
10/28/2014 5:24:22 PM: ERROR when processing alerts on RigS35 (step 11): Column named IPAddress cannot be found.
Parameter name: columnName
Have 8 S1 and 5 S3+. Rig5 is an S1; RigS35 is an S3+. Don't get any errors on the other 11 miners. Configured all the same way. Any idea why I get these errors on the 2 miners above?
Try upgrading to the latest full version, see if you have the same error.
M
October 28, 2014, 04:32:31 PM
Using V3.4b7 and all seems to work fine except I get the following errors.
10/28/2014 5:24:19 PM: Initiated Ant refresh
10/28/2014 5:24:22 PM: ERROR when processing alerts on Rig5 (step 11): Column named IPAddress cannot be found.
Parameter name: columnName
10/28/2014 5:24:22 PM: ERROR when processing alerts on RigS35 (step 11): Column named IPAddress cannot be found.
Parameter name: columnName
Have 8 S1 and 5 S3+. Rig5 is an S1; RigS35 is an S3+. Don't get any errors on the other 11 miners. Configured all the same way. Any idea why I get these errors on the 2 miners above?
10/28/2014 5:24:19 PM: Initiated Ant refresh
10/28/2014 5:24:22 PM: ERROR when processing alerts on Rig5 (step 11): Column named IPAddress cannot be found.
Parameter name: columnName
10/28/2014 5:24:22 PM: ERROR when processing alerts on RigS35 (step 11): Column named IPAddress cannot be found.
Parameter name: columnName
Have 8 S1 and 5 S3+. Rig5 is an S1; RigS35 is an S3+. Don't get any errors on the other 11 miners. Configured all the same way. Any idea why I get these errors on the 2 miners above?
October 28, 2014, 04:30:46 PM
My antivirus deleted it since 2 weeks ago..
I don't know why, but now, the "icon" is white without any direct access.
I don't know why, but now, the "icon" is white without any direct access.
You'll need to white list it. For some reason they don't like what my app does.
See the first listing.
M
October 28, 2014, 03:53:04 PM
My antivirus deleted it since 2 weeks ago..
I don't know why, but now, the "icon" is white without any direct access.
I don't know why, but now, the "icon" is white without any direct access.
October 16, 2014, 04:32:05 PM
Really like your software. Will be sending a tip your way tonight of .10 BTC.
Thanks!
Quote
Are there any plans to add features? A great feature would be the ability to update settings, such as Frequency/Rate of the S3+ units.
That's only doable via the web interface or SSH, correct? I've shied away from putting anything in SSH that, if it goes wrong, could brick your unit.
Quote
Also, can you change pool info per miner or only all of them at the same time.
I haven't tried this feature yet because my miners are grouped into lots pointing to different pools.
Anyways thanks again, sending .10 BTC your way for the great work.
I haven't tried this feature yet because my miners are grouped into lots pointing to different pools.
Anyways thanks again, sending .10 BTC your way for the great work.
Works for all. Note for S1s and S3s you'll have to enable API updates to cgminer, by default it can only be done locally.
M
How do you enable api updates to cgminer. Thanks.
You have to update the cgminer startup/config via SSH. I don't know the specific details, however I'm certain you can find it with a google search.
Since I've been asked this enough one of the days I'll take the time to find the info and post it here, for use at your own risk.
M
October 16, 2014, 03:26:00 PM
Really like your software. Will be sending a tip your way tonight of .10 BTC.
Thanks!
Quote
Are there any plans to add features? A great feature would be the ability to update settings, such as Frequency/Rate of the S3+ units.
That's only doable via the web interface or SSH, correct? I've shied away from putting anything in SSH that, if it goes wrong, could brick your unit.
Quote
Also, can you change pool info per miner or only all of them at the same time.
I haven't tried this feature yet because my miners are grouped into lots pointing to different pools.
Anyways thanks again, sending .10 BTC your way for the great work.
I haven't tried this feature yet because my miners are grouped into lots pointing to different pools.
Anyways thanks again, sending .10 BTC your way for the great work.
Works for all. Note for S1s and S3s you'll have to enable API updates to cgminer, by default it can only be done locally.
M
How do you enable api updates to cgminer. Thanks.
October 16, 2014, 05:12:50 AM
Really like your software. Will be sending a tip your way tonight of .10 BTC.
Thanks!
Quote
Are there any plans to add features? A great feature would be the ability to update settings, such as Frequency/Rate of the S3+ units.
That's only doable via the web interface or SSH, correct? I've shied away from putting anything in SSH that, if it goes wrong, could brick your unit.
Quote
Also, can you change pool info per miner or only all of them at the same time.
I haven't tried this feature yet because my miners are grouped into lots pointing to different pools.
Anyways thanks again, sending .10 BTC your way for the great work.
I haven't tried this feature yet because my miners are grouped into lots pointing to different pools.
Anyways thanks again, sending .10 BTC your way for the great work.
Works for all. Note for S1s and S3s you'll have to enable API updates to cgminer, by default it can only be done locally.
M
October 16, 2014, 02:47:03 AM
Really like your software. Will be sending a tip your way tonight of .10 BTC.
Are there any plans to add features? A great feature would be the ability to update settings, such as Frequency/Rate of the S3+ units.
Also, can you change pool info per miner or only all of them at the same time.
I haven't tried this feature yet because my miners are grouped into lots pointing to different pools.
Anyways thanks again, sending .10 BTC your way for the great work.
Strato
Are there any plans to add features? A great feature would be the ability to update settings, such as Frequency/Rate of the S3+ units.
Also, can you change pool info per miner or only all of them at the same time.
I haven't tried this feature yet because my miners are grouped into lots pointing to different pools.
Anyways thanks again, sending .10 BTC your way for the great work.
Strato
Jump to: