M's Miner (Ant/SP) Monitor v5.2: alerts,auto/mass/scheduled reboot/mobile miner - page 40.

MoreBloodWine

legendary

Activity: 1064

Merit: 1001

Quote from: mdude77 on August 10, 2014, 09:26:32 AM

Quote from: MoreBloodWine on August 10, 2014, 08:43:59 AM

Quote from: mdude77 on August 10, 2014, 08:26:59 AM

Quote from: MoreBloodWine on August 10, 2014, 08:17:27 AM

Or do you mean this ?

http://eojmarket.com/NonForumStuff/bitcointalk/s30001.jpg
http://eojmarket.com/NonForumStuff/bitcointalk/s30002.jpg
http://eojmarket.com/NonForumStuff/bitcointalk/s30003.jpg
http://eojmarket.com/NonForumStuff/bitcointalk/s30004.jpg

First page of the config from M's Ant Monitor.

M

Here it is after adding a miner and hitting refresh.

I think there might be a bug if you have less than 3 miners and use the web interface. Can you add two more?

M

That's just it, no matter how many I add the results are the same.

Epoch

legendary

Activity: 922

Merit: 1003

Quote from: mdude77 on August 10, 2014, 09:26:59 AM

Quote from: Epoch on August 10, 2014, 09:08:45 AM

I'd like to give this monitor a try with some S3's, but in the OP there is a statement: "- This does NOT work for S1s unless you modify the cgminer config to allow SSH API access."

Is the above caveat valid for S3's? That is, will the Monitor work with an S3 "out of the box". If not, exactly what needs to be done to the S3 to make it work? Thanks in advance.

The part that's referring to is updating the pool info via the app. Everything else works fine to my knowledge.

M

So there's nothing special to configure in the cgminer config to allow the monitor to work with S1's or S3's?

opieum2

hero member

Activity: 532

Merit: 500

I initially had it set up in numerical sequence, but because of this I figured I would try it out like this. It does not seem to want to create the 6th field for some reason. Oh and again thanks for your efforts on this Cheesy

mdude77

legendary

Activity: 1540

Merit: 1001

Quote from: opieum2 on August 10, 2014, 10:26:40 AM

Quote from: mdude77 on August 10, 2014, 10:12:30 AM

Quote from: opieum2 on August 10, 2014, 09:51:14 AM

Quote from: mdude77 on August 10, 2014, 02:17:49 AM

Quote from: opieum2 on August 10, 2014, 12:11:37 AM

Great tool btw. It has worked well. However I am running into one small issue. I can't seem to add more than 5 machines before the 5th field gets shared with the 6th. I had hoped to be able to scale out. Is this possible?

For instance if I have 5 and add a 6th the two fields are shared I have no way of separating them. Anything I can do to address this?

I've had 9 Ants running on here (see op screenshot) and I know others have had a lot more than that. Can you post a screenshot of what you mean?

There is an issue where if you have two ants with the same ending address only one will appear on the grid. ie,

192.168.0.90
192.168.1.90

only the first will appear and it gets overwritten with the second. But both are configurable for monitoring, they just don't both show up.

M

Here is what it looks like. As you can see the last entries are the one in question. Both having unique IPs. Ignore the fact that it has an error. That is deliberate and to demonstrate the contrast. One is an S3 (under S1 entry) and the working one is an S2.

What are the IPs of the last two?

M

192.168.0.230 S2
192.168.0.235 S3

Oh and this happens on two different machines running Windows 8.1.

I'm not sure. I'll have to look at the code.

M

opieum2

hero member

Activity: 532

Merit: 500

Quote from: mdude77 on August 10, 2014, 10:12:30 AM

Quote from: opieum2 on August 10, 2014, 09:51:14 AM

Quote from: mdude77 on August 10, 2014, 02:17:49 AM

Quote from: opieum2 on August 10, 2014, 12:11:37 AM

Great tool btw. It has worked well. However I am running into one small issue. I can't seem to add more than 5 machines before the 5th field gets shared with the 6th. I had hoped to be able to scale out. Is this possible?

For instance if I have 5 and add a 6th the two fields are shared I have no way of separating them. Anything I can do to address this?

I've had 9 Ants running on here (see op screenshot) and I know others have had a lot more than that. Can you post a screenshot of what you mean?

There is an issue where if you have two ants with the same ending address only one will appear on the grid. ie,

192.168.0.90
192.168.1.90

only the first will appear and it gets overwritten with the second. But both are configurable for monitoring, they just don't both show up.

M

Here is what it looks like. As you can see the last entries are the one in question. Both having unique IPs. Ignore the fact that it has an error. That is deliberate and to demonstrate the contrast. One is an S3 (under S1 entry) and the working one is an S2.

What are the IPs of the last two?

M

192.168.0.230 S2
192.168.0.235 S3

Oh and this happens on two different machines running Windows 8.1.

mdude77

legendary

Activity: 1540

Merit: 1001

Quote from: opieum2 on August 10, 2014, 09:51:14 AM

Quote from: mdude77 on August 10, 2014, 02:17:49 AM

Quote from: opieum2 on August 10, 2014, 12:11:37 AM

Great tool btw. It has worked well. However I am running into one small issue. I can't seem to add more than 5 machines before the 5th field gets shared with the 6th. I had hoped to be able to scale out. Is this possible?

For instance if I have 5 and add a 6th the two fields are shared I have no way of separating them. Anything I can do to address this?

I've had 9 Ants running on here (see op screenshot) and I know others have had a lot more than that. Can you post a screenshot of what you mean?

There is an issue where if you have two ants with the same ending address only one will appear on the grid. ie,

192.168.0.90
192.168.1.90

only the first will appear and it gets overwritten with the second. But both are configurable for monitoring, they just don't both show up.

M

Here is what it looks like. As you can see the last entries are the one in question. Both having unique IPs. Ignore the fact that it has an error. That is deliberate and to demonstrate the contrast. One is an S3 (under S1 entry) and the working one is an S2.

What are the IPs of the last two?

M

opieum2

hero member

Activity: 532

Merit: 500

Quote from: mdude77 on August 10, 2014, 02:17:49 AM

Quote from: opieum2 on August 10, 2014, 12:11:37 AM

Great tool btw. It has worked well. However I am running into one small issue. I can't seem to add more than 5 machines before the 5th field gets shared with the 6th. I had hoped to be able to scale out. Is this possible?

For instance if I have 5 and add a 6th the two fields are shared I have no way of separating them. Anything I can do to address this?

I've had 9 Ants running on here (see op screenshot) and I know others have had a lot more than that. Can you post a screenshot of what you mean?

There is an issue where if you have two ants with the same ending address only one will appear on the grid. ie,

192.168.0.90
192.168.1.90

only the first will appear and it gets overwritten with the second. But both are configurable for monitoring, they just don't both show up.

M

Here is what it looks like. As you can see the last entries are the one in question. Both having unique IPs. Ignore the fact that it has an error. That is deliberate and to demonstrate the contrast. One is an S3 (under S1 entry) and the working one is an S2.

mdude77

legendary

Activity: 1540

Merit: 1001

Quote from: Epoch on August 10, 2014, 09:08:45 AM

I'd like to give this monitor a try with some S3's, but in the OP there is a statement: "- This does NOT work for S1s unless you modify the cgminer config to allow SSH API access."

Is the above caveat valid for S3's? That is, will the Monitor work with an S3 "out of the box". If not, exactly what needs to be done to the S3 to make it work? Thanks in advance.

The part that's referring to is updating the pool info via the app. Everything else works fine to my knowledge.

M

mdude77

legendary

Activity: 1540

Merit: 1001

Quote from: MoreBloodWine on August 10, 2014, 08:43:59 AM

Quote from: mdude77 on August 10, 2014, 08:26:59 AM

Quote from: MoreBloodWine on August 10, 2014, 08:17:27 AM

Or do you mean this ?

http://eojmarket.com/NonForumStuff/bitcointalk/s30001.jpg
http://eojmarket.com/NonForumStuff/bitcointalk/s30002.jpg
http://eojmarket.com/NonForumStuff/bitcointalk/s30003.jpg
http://eojmarket.com/NonForumStuff/bitcointalk/s30004.jpg

First page of the config from M's Ant Monitor.

M

Here it is after adding a miner and hitting refresh.

I think there might be a bug if you have less than 3 miners and use the web interface. Can you add two more?

M

MoreBloodWine

legendary

Activity: 1064

Merit: 1001

Quote from: Epoch on August 10, 2014, 09:08:45 AM

I'd like to give this monitor a try with some S3's, but in the OP there is a statement: "- This does NOT work for S1s unless you modify the cgminer config to allow SSH API access."

Is the above caveat valid for S3's? That is, will the Monitor work with an S3 "out of the box". If not, exactly what needs to be done to the S3 to make it work? Thanks in advance.

That's what were trying to figure out now, but my case is unique I guess. Have to use webui feature since mine are hosted outside the house.

Epoch

legendary

Activity: 922

Merit: 1003

I'd like to give this monitor a try with some S3's, but in the OP there is a statement: "- This does NOT work for S1s unless you modify the cgminer config to allow SSH API access."

Is the above caveat valid for S3's? That is, will the Monitor work with an S3 "out of the box". If not, exactly what needs to be done to the S3 to make it work? Thanks in advance.

MoreBloodWine

legendary

Activity: 1064

Merit: 1001

Ok... *scratches head*

Quote

8/10/2014 9:31:02 AM: M's Ant Monitor v2.6a starting
8/10/2014 9:32:17 AM: Initiated refresh
8/10/2014 9:32:19 AM: Submitting S1: xxx.xxx.xxx.89:2013 on instance 0
8/10/2014 9:32:31 AM: 89:2013 responded with login page
8/10/2014 9:32:35 AM: 89:2013 responded with login page
8/10/2014 9:42:30 AM: Initiated refresh

MoreBloodWine

legendary

Activity: 1064

Merit: 1001

Quote from: mdude77 on August 10, 2014, 08:26:59 AM

Quote from: MoreBloodWine on August 10, 2014, 08:17:27 AM

Or do you mean this ?

http://eojmarket.com/NonForumStuff/bitcointalk/s30001.jpg
http://eojmarket.com/NonForumStuff/bitcointalk/s30002.jpg
http://eojmarket.com/NonForumStuff/bitcointalk/s30003.jpg
http://eojmarket.com/NonForumStuff/bitcointalk/s30004.jpg

First page of the config from M's Ant Monitor.

M

Here it is after adding a miner and hitting refresh.

Here's what happens when I "click" the miner if it matters at all.

mdude77

legendary

Activity: 1540

Merit: 1001

Quote from: MoreBloodWine on August 10, 2014, 08:17:27 AM

Or do you mean this ?

http://eojmarket.com/NonForumStuff/bitcointalk/s30001.jpg
http://eojmarket.com/NonForumStuff/bitcointalk/s30002.jpg
http://eojmarket.com/NonForumStuff/bitcointalk/s30003.jpg
http://eojmarket.com/NonForumStuff/bitcointalk/s30004.jpg

First page of the config from M's Ant Monitor.

M

MoreBloodWine

legendary

Activity: 1064

Merit: 1001

Or do you mean this ?

http://eojmarket.com/NonForumStuff/bitcointalk/s30001.jpg
http://eojmarket.com/NonForumStuff/bitcointalk/s30002.jpg
http://eojmarket.com/NonForumStuff/bitcointalk/s30003.jpg
http://eojmarket.com/NonForumStuff/bitcointalk/s30004.jpg

MoreBloodWine

legendary

Activity: 1064

Merit: 1001

Quote from: mdude77 on August 10, 2014, 08:06:23 AM

Quote from: MoreBloodWine on August 10, 2014, 07:53:27 AM

Quote from: mdude77 on August 10, 2014, 07:43:21 AM

Quote from: MoreBloodWine on August 10, 2014, 07:32:31 AM

Quote from: mdude77 on August 10, 2014, 07:16:08 AM

Quote from: MoreBloodWine on August 10, 2014, 06:36:44 AM

Quote from: mdude77 on August 10, 2014, 06:05:26 AM

Quote from: MoreBloodWine on August 10, 2014, 02:39:18 AM

Think I go it, uncheck the API box.

That said, since I have S3's do I check S1 or S2 until you add S3 ?

Yes, uncheck the API box.

It behaves just like an S1, just faster.

M

When I add the miner and hit refresh, I get a .net popup about an unhandled exception.

This is just part of it...

It doesn't like something about your list of Ants to check. Does at least one of them have the checkbox checked?

M

Nope, all unchecked. Like I said, they're all hosted away from me about 5hrs with I{'s like this...

1.2.3.4:5676 <-- S30001
1.2.3.4:5677 <-- S30002
1.2.3.4:5678 <-- S30003
1.2.3.4:5679 <-- S30004

Do I need to do anything on the web UI side of things ?

Unchecked ones are skipped. Checked ones are the ones it tries to monitor. See what happens when you check them?

M

I misread in haste, bu all are checked, I was thinking of the API uncheck.

Can you post a screenshot of your config?

M

Specifically which page ?

mdude77

legendary

Activity: 1540

Merit: 1001

Quote from: MoreBloodWine on August 10, 2014, 07:53:27 AM

Quote from: mdude77 on August 10, 2014, 07:43:21 AM

Quote from: MoreBloodWine on August 10, 2014, 07:32:31 AM

Quote from: mdude77 on August 10, 2014, 07:16:08 AM

Quote from: MoreBloodWine on August 10, 2014, 06:36:44 AM

Quote from: mdude77 on August 10, 2014, 06:05:26 AM

Quote from: MoreBloodWine on August 10, 2014, 02:39:18 AM

Think I go it, uncheck the API box.

That said, since I have S3's do I check S1 or S2 until you add S3 ?

Yes, uncheck the API box.

It behaves just like an S1, just faster.

M

When I add the miner and hit refresh, I get a .net popup about an unhandled exception.

This is just part of it...

It doesn't like something about your list of Ants to check. Does at least one of them have the checkbox checked?

M

Nope, all unchecked. Like I said, they're all hosted away from me about 5hrs with I{'s like this...

1.2.3.4:5676 <-- S30001
1.2.3.4:5677 <-- S30002
1.2.3.4:5678 <-- S30003
1.2.3.4:5679 <-- S30004

Do I need to do anything on the web UI side of things ?

Unchecked ones are skipped. Checked ones are the ones it tries to monitor. See what happens when you check them?

M

I misread in haste, bu all are checked, I was thinking of the API uncheck.

Can you post a screenshot of your config?

M

MoreBloodWine

legendary

Activity: 1064

Merit: 1001

Quote from: mdude77 on August 10, 2014, 07:43:21 AM

Quote from: MoreBloodWine on August 10, 2014, 07:32:31 AM

Quote from: mdude77 on August 10, 2014, 07:16:08 AM

Quote from: MoreBloodWine on August 10, 2014, 06:36:44 AM

Quote from: mdude77 on August 10, 2014, 06:05:26 AM

Quote from: MoreBloodWine on August 10, 2014, 02:39:18 AM

Think I go it, uncheck the API box.

That said, since I have S3's do I check S1 or S2 until you add S3 ?

Yes, uncheck the API box.

It behaves just like an S1, just faster.

M

When I add the miner and hit refresh, I get a .net popup about an unhandled exception.

This is just part of it...

It doesn't like something about your list of Ants to check. Does at least one of them have the checkbox checked?

M

Nope, all unchecked. Like I said, they're all hosted away from me about 5hrs with I{'s like this...

1.2.3.4:5676 <-- S30001
1.2.3.4:5677 <-- S30002
1.2.3.4:5678 <-- S30003
1.2.3.4:5679 <-- S30004

Do I need to do anything on the web UI side of things ?

Unchecked ones are skipped. Checked ones are the ones it tries to monitor. See what happens when you check them?

M

I misread in haste, bu all are checked, I was thinking of the API uncheck.

mdude77

legendary

Activity: 1540

Merit: 1001

Quote from: MoreBloodWine on August 10, 2014, 07:32:31 AM

Quote from: mdude77 on August 10, 2014, 07:16:08 AM

Quote from: MoreBloodWine on August 10, 2014, 06:36:44 AM

Quote from: mdude77 on August 10, 2014, 06:05:26 AM

Quote from: MoreBloodWine on August 10, 2014, 02:39:18 AM

Think I go it, uncheck the API box.

That said, since I have S3's do I check S1 or S2 until you add S3 ?

Yes, uncheck the API box.

It behaves just like an S1, just faster.

M

When I add the miner and hit refresh, I get a .net popup about an unhandled exception.

This is just part of it...

It doesn't like something about your list of Ants to check. Does at least one of them have the checkbox checked?

M

Nope, all unchecked. Like I said, they're all hosted away from me about 5hrs with I{'s like this...

1.2.3.4:5676 <-- S30001
1.2.3.4:5677 <-- S30002
1.2.3.4:5678 <-- S30003
1.2.3.4:5679 <-- S30004

Do I need to do anything on the web UI side of things ?

Unchecked ones are skipped. Checked ones are the ones it tries to monitor. See what happens when you check them?

M

MoreBloodWine

legendary

Activity: 1064

Merit: 1001

Quote from: mdude77 on August 10, 2014, 07:16:08 AM

Quote from: MoreBloodWine on August 10, 2014, 06:36:44 AM

Quote from: mdude77 on August 10, 2014, 06:05:26 AM

Quote from: MoreBloodWine on August 10, 2014, 02:39:18 AM

Think I go it, uncheck the API box.

That said, since I have S3's do I check S1 or S2 until you add S3 ?

Yes, uncheck the API box.

It behaves just like an S1, just faster.

M

When I add the miner and hit refresh, I get a .net popup about an unhandled exception.

This is just part of it...

It doesn't like something about your list of Ants to check. Does at least one of them have the checkbox checked?

M

Nope, all unchecked. Like I said, they're all hosted away from me about 5hrs with I{'s like this...

1.2.3.4:5676 <-- S30001
1.2.3.4:5677 <-- S30002
1.2.3.4:5678 <-- S30003
1.2.3.4:5679 <-- S30004

Do I need to do anything on the web UI side of things ?

Topic: M's Miner (Ant/SP) Monitor v5.2: alerts,auto/mass/scheduled reboot/mobile miner - page 40. (Read 209500 times)