Pages:
Author

Topic: M's Miner (Ant/SP) Monitor v5.2: alerts,auto/mass/scheduled reboot/mobile miner - page 57. (Read 209500 times)

legendary
Activity: 1540
Merit: 1001
norton says virus... crazy... but norton also says namecoin is a virus...

I stopped using Norton LONG ago.  There were too many things it didn't like/allow that I did!

M
sr. member
Activity: 261
Merit: 257
everything looks great except it still doesnt actually reboot my miners

Are you sure?  I know the reboot functionality works, as it reboots both my S1s and S2s.  Keep in mind sometimes Xs don't go away with warm reboots.  My S2 was rebooted every 15 minutes all day the other day while I was at work "your thing downstairs has been beeping all day", and only after I power cycled it did the X go away.

M

FYI using the WebUI for reboots is not reliable. This is an issue with the antminer, the only reliable method is ssh.

Umm.. it works fine here.  Sometimes I get Xs that won't go away without a power cycle, but for the most part, the webui reboot works fine.  Automated no less.

M

It usually works, but is not 100% due to S1 WebUI being somewhat buggy. SSH automation is ideal but not sure how easy it is to do with a windows tool like this(easy to do in linux/mac).
full member
Activity: 121
Merit: 100
norton says virus... crazy... but norton also says namecoin is a virus...
legendary
Activity: 1540
Merit: 1001
everything looks great except it still doesnt actually reboot my miners

Are you sure?  I know the reboot functionality works, as it reboots both my S1s and S2s.  Keep in mind sometimes Xs don't go away with warm reboots.  My S2 was rebooted every 15 minutes all day the other day while I was at work "your thing downstairs has been beeping all day", and only after I power cycled it did the X go away.

M

FYI using the WebUI for reboots is not reliable. This is an issue with the antminer, the only reliable method is ssh.

Umm.. it works fine here.  Sometimes I get Xs that won't go away without a power cycle, but for the most part, the webui reboot works fine.  Automated no less.

M
sr. member
Activity: 261
Merit: 257
everything looks great except it still doesnt actually reboot my miners

Are you sure?  I know the reboot functionality works, as it reboots both my S1s and S2s.  Keep in mind sometimes Xs don't go away with warm reboots.  My S2 was rebooted every 15 minutes all day the other day while I was at work "your thing downstairs has been beeping all day", and only after I power cycled it did the X go away.

M

FYI using the WebUI for reboots is not reliable. This is an issue with the antminer, the only reliable method is ssh.
hero member
Activity: 770
Merit: 500
Ooops sorry about that, I must not of read through the thread as entirely as I thought.
I see why, most people who would run this would have more than 1 ant to monitor.
legendary
Activity: 1540
Merit: 1001
Love the idea and the app works somewhat here. v1.5
The fans, temps, freqs and status are all blank.
I see there are some issues but thought I would check in with my experience as well.

That's a new one!  Hopefully the next version will work properly for you.

I'm just curious, are you using S1s or S2s?

Quote
Would be nice to see a stop button for the scan feature as well in the future possibly?

Good idea.

I expect the next version to be a bit faster with scanning however.

M
I'm running one S1, but only 1 blade currently; I don't think it's relevant but full disclosure..
Browser 1 tab loads and displays the stats. It's just in the Ants tab that the fields don't populate entirely.

That's a known "issue".  It expects there to be 2 blades, and doesn't know how to respond if there are 1.

M
hero member
Activity: 770
Merit: 500
Love the idea and the app works somewhat here. v1.5
The fans, temps, freqs and status are all blank.
I see there are some issues but thought I would check in with my experience as well.

That's a new one!  Hopefully the next version will work properly for you.

I'm just curious, are you using S1s or S2s?

Quote
Would be nice to see a stop button for the scan feature as well in the future possibly?

Good idea.

I expect the next version to be a bit faster with scanning however.

M
I'm running one S1, but only 1 blade currently; I don't think it's relevant but full disclosure..
Browser 1 tab loads and displays the stats. It's just in the Ants tab that the fields don't populate entirely.
legendary
Activity: 1540
Merit: 1001
Love the idea and the app works somewhat here. v1.5
The fans, temps, freqs and status are all blank.
I see there are some issues but thought I would check in with my experience as well.

That's a new one!  Hopefully the next version will work properly for you.

I'm just curious, are you using S1s or S2s?

Quote
Would be nice to see a stop button for the scan feature as well in the future possibly?

Good idea.

I expect the next version to be a bit faster with scanning however.

M
hero member
Activity: 770
Merit: 500
Love the idea and the app works somewhat here. v1.5
The fans, temps, freqs and status are all blank.
I see there are some issues but thought I would check in with my experience as well.
Would be nice to see a stop button for the scan feature as well in the future possibly?
legendary
Activity: 1540
Merit: 1001
everything looks great except it still doesnt actually reboot my miners

Are you sure?  I know the reboot functionality works, as it reboots both my S1s and S2s.  Keep in mind sometimes Xs don't go away with warm reboots.  My S2 was rebooted every 15 minutes all day the other day while I was at work "your thing downstairs has been beeping all day", and only after I power cycled it did the X go away.

M
sr. member
Activity: 296
Merit: 250
everything looks great except it still doesnt actually reboot my miners
legendary
Activity: 1540
Merit: 1001

look for this reg key - I deleted it to reset my settings:
(be careful if you're not familiar with regedit - but it sounds like you are)

My Computer\HKEY_CURRENT_USER\Software\MAntMonitor

You may need to restart Windoze to accept the registry change.  Just deleting the key may not be sufficient.

Deleting or renaming should be fine.  That's what I do to test it to make sure I didn't miss anything for completely new users.

M
legendary
Activity: 1540
Merit: 1001
I'm running Linux Mint 16 x64 with the low latency kernel.
I have installed VirtualBox and have loaded my OEM copy of Windows Vista Business 32-Bit (yea, I know, it's why I run Linux), installed the needed .NET.
v1.4 shows my S1 on the "Ants" tab.
v1.5 does not.
The v1.5 logs and browser1 show successful connections with the S1.

So I'm running 1.4 right now and have the vbox set up in seamless mode, so it's right there under the Java BitMinter Client on my Linux desktop.
Reminds me of when I ran Windows under OS/2...

Thanks for the feedback.  I'm still at a loss as to why version to version it works for some people, but not others.  I hope to be able to make use of the cgminer API for the next version, and add some debug info for the web side (you'll be able to choose which one you want).

Quote
I also have to note that M's Pool Monitor v3.9 is very nice.

Smiley Thanks.

M
hero member
Activity: 616
Merit: 500

look for this reg key - I deleted it to reset my settings:
(be careful if you're not familiar with regedit - but it sounds like you are)

My Computer\HKEY_CURRENT_USER\Software\MAntMonitor

You may need to restart Windoze to accept the registry change.  Just deleting the key may not be sufficient.

newbie
Activity: 50
Merit: 0
I'm running Linux Mint 16 x64 with the low latency kernel.
I have installed VirtualBox and have loaded my OEM copy of Windows Vista Business 32-Bit (yea, I know, it's why I run Linux), installed the needed .NET.
v1.4 shows my S1 on the "Ants" tab.
v1.5 does not.
The v1.5 logs and browser1 show successful connections with the S1.

So I'm running 1.4 right now and have the vbox set up in seamless mode, so it's right there under the Java BitMinter Client on my Linux desktop.
Reminds me of when I ran Windows under OS/2...

I also have to note that M's Pool Monitor v3.9 is very nice.
legendary
Activity: 1540
Merit: 1001
I was browsing around on an S1 when I first got it. I think one could enable the API for local network with a change of one of the files. Want me to test and report back? I think it voids the warranty though Sad

I think a few changes here could allow API access to the miner.

/etc/config/cgminer

Thanks for looking.  I do not want to require someone to edit a file.  I want this to be PNP, like S1s.

I think, though, this confirms it's only accessible by localhost without a change.

M

No, it is accessible over the network by default, the reason this is not obvious is because the api option is in the cgminer init file.

Thank you for posting this.  It's most useful.

M
newbie
Activity: 32
Merit: 0

look for this reg key - I deleted it to reset my settings:
(be careful if you're not familiar with regedit - but it sounds like you are)

My Computer\HKEY_CURRENT_USER\Software\MAntMonitor
hero member
Activity: 566
Merit: 500
I just made a change to allow anything on 192.168.1.0/24 and it didn't accept a pool change Sad Sounds like the only clean way to get data is through the webpage. It was worth a shot.

EDIT:

I too am also having issues with 1.5 finding my S1's. I tried deleting all of them and re-adding and still no luck Sad I get an error when I try to run 1.4 now.

1.5 sticks a "S1: " in front of the address in the registry.  1.4 won't like that.

M

Have you posted already where that registry key is located? I'd like to "fix" that in the short term.
sr. member
Activity: 261
Merit: 257
I was browsing around on an S1 when I first got it. I think one could enable the API for local network with a change of one of the files. Want me to test and report back? I think it voids the warranty though Sad

I think a few changes here could allow API access to the miner.

/etc/config/cgminer

Thanks for looking.  I do not want to require someone to edit a file.  I want this to be PNP, like S1s.

I think, though, this confirms it's only accessible by localhost without a change.

M

No, it is accessible over the network by default, the reason this is not obvious is because the api option is in the cgminer init file.

These are the options cgminer starts with
Code:
cgminer --bitmain-options 115200:32:8:40:350:4d81 -o 50.31.149.57:3333 -O antminer_1:123 -o http://stratum.antpool.com:6688 -O bm1_1:123 -o stratum+tcp://stratum.50btc.com:3333 -O [email protected]:123 --api-listen --api-network
As you can see it is operating in listen mode, you can't actually change cgminer options using the API in this mode but you can view everything that you would see in the stats page.

And of course you can see pretty much everything in the cgminer stats that you would in the webui.
Code:
root@antMiner:~# cgminer-api stats
Reply was 'STATUS=S,When=1400754110,Code=70,Msg=CGMiner stats,Description=cgminer 3.12.0|STATS=0,ID=BMM0,Elapsed=41,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,baud=115200,miner_count=2,asic_count=8,timeout=40,frequency=350,voltage=5,fan_num=1,fan1=3300,fan2=0,fan3=0,fan4=0,temp_num=2,temp1=54,temp2=54,temp3=0,temp4=0,temp_avg=54,temp_max=54,Device Hardware%=0.0000,no_matching_work=0,chain_acn1=32,chain_acn2=32,chain_acn3=0,chain_acn4=0,chain_acs1=oooooooo oooooooo oooooooo oooooooo,chain_acs2=oooooooo oooooooo oooooooo oooooooo,chain_acs3=,chain_acs4=,USB Pipe=0,USB Delay=r0 0.000000 w0 0.000000,USB tmo=49411 50=704/68/112/50479/12672 100=53/119/293/6144/954 500=3/1010/2147483647/2147485763/54 |STATS=1,ID=POOL0,Elapsed=41,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,Pool Calls=0,Pool Attempts=0,Pool Wait=0.000000,Pool Max=0.000000,Pool Min=99999999.000000,Pool Av=0.000000,Work Had Roll Time=false,Work Can Roll=false,Work Had Expire=false,Work Roll Time=0,Work Diff=1024.00000000,Min Diff=1024.00000000,Max Diff=1024.00000000,Min Diff Count=6861,Max Diff Count=6861,Times Sent=14,Bytes Sent=1373,Times Recv=22,Bytes Recv=6894,Net Bytes Sent=2078,Net Bytes Recv=6894|STATS=2,ID=POOL1,Elapsed=41,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,Pool Calls=0,Pool Attempts=0,Pool Wait=0.000000,Pool Max=0.000000,Pool Min=99999999.000000,Pool Av=0.000000,Work Had Roll Time=false,Work Can Roll=false,Work Had Expire=false,Work Roll Time=0,Work Diff=0.00000000,Min Diff=0.00000000,Max Diff=0.00000000,Min Diff Count=0,Max Diff Count=0,Times Sent=0,Bytes Sent=0,Times Recv=0,Bytes Recv=0,Net Bytes Sent=0,Net Bytes Recv=0|STATS=3,ID=POOL2,Elapsed=41,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,Pool Calls=0,Pool Attempts=0,Pool Wait=0.000000,Pool Max=0.000000,Pool Min=99999999.000000,Pool Av=0.000000,Work Had Roll Time=false,Work Can Roll=false,Work Had Expire=false,Work Roll Time=0,Work Diff=0.00000000,Min Diff=0.00000000,Max Diff=0.00000000,Min Diff Count=0,Max Diff Count=0,Times Sent=2,Bytes Sent=153,Times Recv=2,Bytes Recv=156,Net Bytes Sent=153,Net Bytes Recv=156|'
[STATUS] =>
(
   [STATUS] => S
   [When] => 1400754110
   [Code] => 70
   [Msg] => CGMiner stats
   [Description] => cgminer 3.12.0
)
[STATS0] =>
(
   [STATS] => 0
   [ID] => BMM0
   [Elapsed] => 41
   [Calls] => 0
   [Wait] => 0.000000
   [Max] => 0.000000
   [Min] => 99999999.000000
   [baud] => 115200
   [miner_count] => 2
   [asic_count] => 8
   [timeout] => 40
   [frequency] => 350
   [voltage] => 5
   [fan_num] => 1
   [fan1] => 3300
   [fan2] => 0
   [fan3] => 0
   [fan4] => 0
   [temp_num] => 2
   [temp1] => 54
   [temp2] => 54
   [temp3] => 0
   [temp4] => 0
   [temp_avg] => 54
   [temp_max] => 54
   [Device Hardware%] => 0.0000
   [no_matching_work] => 0
   [chain_acn1] => 32
   [chain_acn2] => 32
   [chain_acn3] => 0
   [chain_acn4] => 0
   [chain_acs1] => oooooooo oooooooo oooooooo oooooooo
   [chain_acs2] => oooooooo oooooooo oooooooo oooooooo
   [chain_acs3] =>
   [chain_acs4] =>
   [USB Pipe] => 0
   [USB Delay] => r0 0.000000 w0 0.000000
   [USB tmo] => 49411 50=704/68/112/50479/12672 100=53/119/293/6144/954 500=3/1010/2147483647/2147485763/54
)
[STATS1] =>
(
   [STATS] => 1
   [ID] => POOL0
   [Elapsed] => 41
   [Calls] => 0
   [Wait] => 0.000000
   [Max] => 0.000000
   [Min] => 99999999.000000
   [Pool Calls] => 0
   [Pool Attempts] => 0
   [Pool Wait] => 0.000000
   [Pool Max] => 0.000000
   [Pool Min] => 99999999.000000
   [Pool Av] => 0.000000
   [Work Had Roll Time] => false
   [Work Can Roll] => false
   [Work Had Expire] => false
   [Work Roll Time] => 0
   [Work Diff] => 1024.00000000
   [Min Diff] => 1024.00000000
   [Max Diff] => 1024.00000000
   [Min Diff Count] => 6861
   [Max Diff Count] => 6861
   [Times Sent] => 14
   [Bytes Sent] => 1373
   [Times Recv] => 22
   [Bytes Recv] => 6894
   [Net Bytes Sent] => 2078
   [Net Bytes Recv] => 6894
)
[STATS2] =>
(
   [STATS] => 2
   [ID] => POOL1
   [Elapsed] => 41
   [Calls] => 0
   [Wait] => 0.000000
   [Max] => 0.000000
   [Min] => 99999999.000000
   [Pool Calls] => 0
   [Pool Attempts] => 0
   [Pool Wait] => 0.000000
   [Pool Max] => 0.000000
   [Pool Min] => 99999999.000000
   [Pool Av] => 0.000000
   [Work Had Roll Time] => false
   [Work Can Roll] => false
   [Work Had Expire] => false
   [Work Roll Time] => 0
   [Work Diff] => 0.00000000
   [Min Diff] => 0.00000000
   [Max Diff] => 0.00000000
   [Min Diff Count] => 0
   [Max Diff Count] => 0
   [Times Sent] => 0
   [Bytes Sent] => 0
   [Times Recv] => 0
   [Bytes Recv] => 0
   [Net Bytes Sent] => 0
   [Net Bytes Recv] => 0
)
[STATS3] =>
(
   [STATS] => 3
   [ID] => POOL2
   [Elapsed] => 41
   [Calls] => 0
   [Wait] => 0.000000
   [Max] => 0.000000
   [Min] => 99999999.000000
   [Pool Calls] => 0
   [Pool Attempts] => 0
   [Pool Wait] => 0.000000
   [Pool Max] => 0.000000
   [Pool Min] => 99999999.000000
   [Pool Av] => 0.000000
   [Work Had Roll Time] => false
   [Work Can Roll] => false
   [Work Had Expire] => false
   [Work Roll Time] => 0
   [Work Diff] => 0.00000000
   [Min Diff] => 0.00000000
   [Max Diff] => 0.00000000
   [Min Diff Count] => 0
   [Max Diff Count] => 0
   [Times Sent] => 2
   [Bytes Sent] => 153
   [Times Recv] => 2
   [Bytes Recv] => 156
   [Net Bytes Sent] => 153
   [Net Bytes Recv] => 156
)
[/code]
Pages:
Jump to: