MultiMiner: Any Miner, Any Where, on Any Device (Free, Open Source, Cross Platform) - page 88.

Blackbird0

full member

Activity: 207

Merit: 100

Quote from: nwoolls on February 11, 2014, 06:39:16 PM

Quote from: Blackbird0 on February 11, 2014, 06:37:19 PM

Just wanted to add my voice to the chorus that I'm very interested in seeing MultiMiner and your work on BFGMiner support the new DualMiner USB.

Hit a roadblock but working on it. Shouldn't be long.

When you have a remotely stable version, happy to test it on my Mac or my Pi.

ManeBjorn

legendary

Activity: 1288

Merit: 1004

I am so looking forward to support for it.
The version of cgminer for it is buggy and frequently interferes with the rest of my setup.
The miner itself works excellently.
It runs fast and at low temps.
Thanks for the work on getting support for them in there.

Quote from: nwoolls on February 11, 2014, 06:39:16 PM

Quote from: Blackbird0 on February 11, 2014, 06:37:19 PM

Just wanted to add my voice to the chorus that I'm very interested in seeing MultiMiner and your work on BFGMiner support the new DualMiner USB.

Hit a roadblock but working on it. Shouldn't be long.

nwoolls

hero member

Activity: 840

Merit: 1002

Quote from: ManeBjorn on February 11, 2014, 06:40:19 PM

Is there a bit of instructions somewhere on what I would need to configure to get the API to show up on the networked device?
I have an Avalon and I have API Allow enabled on the the unit but I am not sure what to do from there.

You need to add the following arguments:

Code:

--api-listen --api-allow W:127.0.0.1,192.168.0.0/24

Swap out the IP address and range for your own local network. After that you just need to wait a few minutes and it should show up in MultiMiner.

ManeBjorn

legendary

Activity: 1288

Merit: 1004

nwoolls

hero member

Activity: 840

Merit: 1002

Quote from: Blackbird0 on February 11, 2014, 06:37:19 PM

Just wanted to add my voice to the chorus that I'm very interested in seeing MultiMiner and your work on BFGMiner support the new DualMiner USB.

Hit a roadblock but working on it. Shouldn't be long.

Blackbird0

full member

Activity: 207

Merit: 100

Just wanted to add my voice to the chorus that I'm very interested in seeing MultiMiner and your work on BFGMiner support the new DualMiner USB.

nwoolls

hero member

Activity: 840

Merit: 1002

MultiMiner version 2.6.3 is now available. This includes bug fixes, code cleanup, and compatibility between OS platforms when using MultiMiner Remoting:

Source code can now be compiled out-of-the-box on Linux, OS X, and Windows using MonoDevelop 4.0
MultiMiner Remoting is now fully compatible between Linux, OS X, and Windows rigs on your network
Additional information is now logged on unhandled errors to aid troubleshooting
MultiMiner now passes --log when launching BFGMiner to ensure consistent RPC API information (in preparation for new defaults in BFGMiner 4.0)
Addressed inability to toggle device checkboxes while mining
Coin configurations added via Remoting were not immediately visible in the UI
Additional fixes for handling different coin symbols from Coin APIs - e.g. DOG vs DOGE
Fixed error ArgumentOutOfRangeException: Index was out of range
Fixed ability to add two coin configurations with identical names

ManeBjorn

legendary

Activity: 1288

Merit: 1004

Some motherboards disable the on-board graphics if a separate card is installed. You may need to check into that.

Quote from: zKarp on February 11, 2014, 04:40:19 PM

Quote from: nwoolls on February 11, 2014, 02:17:50 AM

You'll need to download or compile a version of BFGMiner with CPU support enabled. The distributed version has CPU mining disabled as it gets flagged by virus scanners.

Thanks I will try that.

Quote

Also integrated Intel graphics cards are not capable of mining.

I was mining with it before I got a graphics card for my desktop.

compile

newbie

Activity: 51

Merit: 0

Quote from: nwoolls on February 11, 2014, 04:29:33 PM

Quote from: compile on February 11, 2014, 04:27:34 PM

I can't get this to work with my r9 270x.

If I put -I 13 in Advanced miner settings its fine.

If i add --thread-concurrency 15508 it doesn't start (also any other commands as well).

Am I doing something wrong?

Do these settings work in BFGMiner outside of MultiMiner? Unfortunately I don't have R9 hardware to test with but I know others are using them successfully.

I've only been using cgminer. When I get home I'll test out bfgminer as you suggested.

zKarp

newbie

Activity: 38

Merit: 0

Quote from: nwoolls on February 11, 2014, 02:17:50 AM

You'll need to download or compile a version of BFGMiner with CPU support enabled. The distributed version has CPU mining disabled as it gets flagged by virus scanners.

Thanks I will try that.

Quote

Also integrated Intel graphics cards are not capable of mining.

I was mining with it before I got a graphics card for my desktop.

nwoolls

hero member

Activity: 840

Merit: 1002

Quote from: crazyearner on February 11, 2014, 08:45:48 AM

To have multipul username configurations for pool mining though stratum proxy. Have managed to get working however pool on notices as one worker connected up. multipul usernames for one pool configuration would be a nice feature to have so that you can assign each miner to its own name and matches pool workers.

It's on the to-do for BFGMiner. That is where it would need to be implemented, not in MultiMiner. Right now the proxy in BFGMiner is basically a "driver" that is just passing work on to the main pool with the main username & password.

You can double-click the Proxy device in MultiMiner and see the stats for each individual worker on the right hand side though. Just give each one a unique worker name.

nwoolls

hero member

Activity: 840

Merit: 1002

Quote from: compile on February 11, 2014, 04:27:34 PM

I can't get this to work with my r9 270x.

If I put -I 13 in Advanced miner settings its fine.

If i add --thread-concurrency 15508 it doesn't start (also any other commands as well).

Am I doing something wrong?

Do these settings work in BFGMiner outside of MultiMiner? Unfortunately I don't have R9 hardware to test with but I know others are using them successfully.

compile

newbie

Activity: 51

Merit: 0

I can't get this to work with my r9 270x.

If I put -I 13 in Advanced miner settings its fine.

If i add --thread-concurrency 15508 it doesn't start (also any other commands as well).

Am I doing something wrong?

crazyearner

legendary

Activity: 1820

Merit: 1001

Idea for next release.

To have multipul username configurations for pool mining though stratum proxy. Have managed to get working however pool on notices as one worker connected up. multipul usernames for one pool configuration would be a nice feature to have so that you can assign each miner to its own name and matches pool workers.

crazyearner

legendary

Activity: 1820

Merit: 1001

SO my firmwares been updated and stratum's is sort of working though proxy configuration however keeps on connecting mining and then after a few min disconnecting. Is thier anything I need to put in miner details to mine with ? qht username and pass should be used when connecting to stratum proxy

Raptor2213

full member

Activity: 210

Merit: 100

Quote from: nwoolls on February 11, 2014, 02:30:58 AM

Quote from: Raptor2213 on February 11, 2014, 02:27:55 AM

I'm not using the --quota option. Is there a way to accomplish what I'm trying to do?

No, not without changing the way MultiMiner handles pools. I'd have to give it some thought.

Alright, thanks.
Could it be just a matter of looking for a --balance flag and changing the pool queuing appropriately?

nwoolls

hero member

Activity: 840

Merit: 1002

Quote from: Raptor2213 on February 11, 2014, 02:27:55 AM

I'm not using the --quota option. Is there a way to accomplish what I'm trying to do?

No, not without changing the way MultiMiner handles pools. I'd have to give it some thought.

Raptor2213

full member

Activity: 210

Merit: 100

Quote from: nwoolls on February 11, 2014, 02:19:12 AM

Quote from: Raptor2213 on February 10, 2014, 07:55:41 PM

nwoolls, any idea what could be causing this yet?

Yes it's caused by the use of the --quota option in BFGMiner. By using --quota to split up work between pools, it overrides / conflicts with the additional --load-balance settings.

I'm not using the --quota option. Is there a way to accomplish what I'm trying to do?

nwoolls

hero member

Activity: 840

Merit: 1002

Quote from: Aurum on February 10, 2014, 07:19:32 PM

I'm running MuM 2.6.2 on a new miner with Windows 8.1 for the first time. It keeps doing something that's never happened with Win7. It crashes and when I restart it it seems like it's awakening from Sleep. The MuM popups say that several files like NetworkDevicesConfiguration.xml and KnownCoinsCache.xml have a value of zero. It does not start automatically but when I look at the config it seems to have everything as I set it up.

Thanks for the report. The XML file part is normal and is handling an otherwise larger error - the original crash caused the XML files to become corrupt.

By crash to you mean that a dialog came up with the option to Continue? Or that it actually crashed the entire app? If it crashed the entire app can you take a look at this?

https://bitcointalksearch.org/topic/m.5044856

Let me know if it is the same issue as I already have a build put together with some extra logging.

nwoolls

hero member

Activity: 840

Merit: 1002

Quote from: Raptor2213 on February 10, 2014, 07:55:41 PM

nwoolls, any idea what could be causing this yet?

Yes it's caused by the use of the --quota option in BFGMiner. By using --quota to split up work between pools, it overrides / conflicts with the additional --load-balance settings.

Topic: MultiMiner: Any Miner, Any Where, on Any Device (Free, Open Source, Cross Platform) - page 88. (Read 827337 times)