MultiMiner: Any Miner, Any Where, on Any Device (Free, Open Source, Cross Platform) - page 91.

Raptor2213

full member

Activity: 210

Merit: 100

Quote from: soulistyce on February 05, 2014, 07:42:53 PM

nevermind i found what was my problem
is something to do with my hub because i plug in directly on the usb cpu and its working fine
sorry to bother you, but thanks

Aye, I was going to say, I haven't been having any issues with mine.

I use the following config:

Code:

--icarus-options 115200:1:1 --icarus-timing long=90 --set-device antminer:clock=x0981 -S antminer:all

ManeBjorn

legendary

Activity: 1288

Merit: 1004

Stick with the 13 drivers the new Mantel 14 drivers are causing some degradation in mining performance others are reporting.

Quote from: nwoolls on February 06, 2014, 01:34:30 AM

Quote from: brooklynite on February 05, 2014, 04:07:47 AM

nwoolls, Here is my .bat file for my 1x6970 + 3x7970s, the first part to delete BIN was the best thing I discovered on my own. Perfecting these numbers took about a month. I get steady 724k/s per 7970 card with a few HW errors which is worth it IMO. I could lose 100kh/s trying to save that tiny bit of HW error, not worth it. I hope this helps:

So I am trying this again tonight. I have removed all cards except one 7970, and I these are the results I am seeing:

https://www.dropbox.com/s/5o04h1x0v7wx4gf/7970-scrypt-a.png

This is generally the poor performance I see unless I revert to thread concurrency 22400 and GPU threads 1. I'm going to try upgrading AMD drivers next, followed by flashing the BIOS some more.

nwoolls

hero member

Activity: 840

Merit: 1002

Quote from: brooklynite on February 05, 2014, 04:07:47 AM

nwoolls, Here is my .bat file for my 1x6970 + 3x7970s, the first part to delete BIN was the best thing I discovered on my own. Perfecting these numbers took about a month. I get steady 724k/s per 7970 card with a few HW errors which is worth it IMO. I could lose 100kh/s trying to save that tiny bit of HW error, not worth it. I hope this helps:

So I am trying this again tonight. I have removed all cards except one 7970, and I these are the results I am seeing:

https://www.dropbox.com/s/5o04h1x0v7wx4gf/7970-scrypt-a.png

This is generally the poor performance I see unless I revert to thread concurrency 22400 and GPU threads 1. I'm going to try upgrading AMD drivers next, followed by flashing the BIOS some more.

nwoolls

hero member

Activity: 840

Merit: 1002

Quote from: soulistyce on February 05, 2014, 07:42:53 PM

nevermind i found what was my problem
is something to do with my hub because i plug in directly on the usb cpu and its working fine
sorry to bother you, but thanks

My pleasure! Grin

soulistyce

hero member

Activity: 698

Merit: 511

Quote from: soulistyce on February 05, 2014, 07:36:49 PM

Quote from: nwoolls on February 05, 2014, 06:56:14 PM

Quote from: soulistyce on February 05, 2014, 06:51:56 PM

i bought an Antminer U1 but cant get any accepted with it on multiminer,
effective hashrate extremely low
on the latest bfgminer i use only -S antminer:all --set-device antminer:clock=x0781 and it works well
but not working on multiminer,

Stop mining in MultiMiner. Show the Process Log screen. Then right-click the entry for bfgminer in the Process Log screen and click Launch. This will launch bfgminer with the same arguments MultiMiner is using. You should see the same results - that something is preventing it from getting successful shares.

Once its been mining for several minutes in bfgminer alone, post a screenshot of that window.

well ive done it and i was able to get some accepted but effective started on 1.3ghs and drop to what ive shown
even my erupters are giving more than the antminer

and still droping hashrate
can i do anything

nevermind i found what was my problem
is something to do with my hub because i plug in directly on the usb cpu and its working fine
sorry to bother you, but thanks

nwoolls

hero member

Activity: 840

Merit: 1002

Quote from: soulistyce on February 05, 2014, 07:36:49 PM

and still droping hashrate
can i do anything

Are you using a powered USB hub? You should not be getting 15% HW errors, more like less than 1%. Maybe it's not getting enough power?

soulistyce

hero member

Activity: 698

Merit: 511

Quote from: nwoolls on February 05, 2014, 06:56:14 PM

Quote from: soulistyce on February 05, 2014, 06:51:56 PM

i bought an Antminer U1 but cant get any accepted with it on multiminer,
effective hashrate extremely low
on the latest bfgminer i use only -S antminer:all --set-device antminer:clock=x0781 and it works well
but not working on multiminer,

Stop mining in MultiMiner. Show the Process Log screen. Then right-click the entry for bfgminer in the Process Log screen and click Launch. This will launch bfgminer with the same arguments MultiMiner is using. You should see the same results - that something is preventing it from getting successful shares.

Once its been mining for several minutes in bfgminer alone, post a screenshot of that window.

well ive done it and i was able to get some accepted but effective started on 1.3ghs and drop to what ive shown
even my erupters are giving more than the antminer

and still droping hashrate
can i do anything

Phoenix48

newbie

Activity: 43

Merit: 0

Quote from: nwoolls on February 05, 2014, 07:15:30 PM

Quote from: Phoenix48 on February 05, 2014, 07:05:59 PM

So my question is this. If i remove one of each, will Multiminer mine them even if i am on the other API? As an example, if i remove Dogecoin (DOGE)(Which is coinwarz version) and keep Dogecoin (DOG)(coinchoose version) and use coinwarz just one day because coinchoose is out, will it use Dogecoin (DOG) or Multiminer won't mine that coin for that day? I am just trying to know if that make a difference in Multiminer and to know if it uses the coin denomination in any way to swith coin or if only the name matters and the denomination has no importance whatever which API we use.

There is code for handling DOGE/DOG in there already, but no others.

You can have both coin configurations in there, you just need to give them different names. The error is because you have multiple configurations with the exact same name. Call one Dogecoin-DOGE if you want (for example).

Ok i changed the names to Dogecoin-DOG, Dogecoin-DOGE, Mooncoin-MOO and Mooncoin-MOON and now it works perfectly. Thank you for the help.

nwoolls

hero member

Activity: 840

Merit: 1002

By-the-by folks, with the latest code on Github you can now download the source and compile / build / run / debug without modification on OS X, Linux, and Windows with MonoDevelop 4.0.

I plan on doing an article about contributing to the project (some day), but in the meantime wanted to put the word out about that.

nwoolls

hero member

Activity: 840

Merit: 1002

Quote from: Phoenix48 on February 05, 2014, 07:05:59 PM

So my question is this. If i remove one of each, will Multiminer mine them even if i am on the other API? As an example, if i remove Dogecoin (DOGE)(Which is coinwarz version) and keep Dogecoin (DOG)(coinchoose version) and use coinwarz just one day because coinchoose is out, will it use Dogecoin (DOG) or Multiminer won't mine that coin for that day? I am just trying to know if that make a difference in Multiminer and to know if it uses the coin denomination in any way to swith coin or if only the name matters and the denomination has no importance whatever which API we use.

There is code for handling DOGE/DOG in there already, but no others.

You can have both coin configurations in there, you just need to give them different names. The error is because you have multiple configurations with the exact same name. Call one Dogecoin-DOGE if you want (for example).

ManeBjorn

legendary

Activity: 1288

Merit: 1004

That's cool.
I did make them finally co-exist. I had to stop running MMC mining on the system with the CPU.
Still can't wait for DualMiner support and MMC cpu mining support in the future.
Thanks for the all the work and enjoy the asic scrypt miners. I cannot believe how cool the DualMiner runs. I am sure that they could be overclocked to even better results once they release the info to allow it.
Pure scrypt mode it's only warm and cranks out 75 kh/s almost 80kh/s now that I have it on the beast USB hub with the fan blowing over it.

Quote from: nwoolls on February 05, 2014, 06:54:50 PM

Quote from: ManeBjorn on February 05, 2014, 05:32:32 PM

I know it is a longshot but any news on adding DualMiner support yet?
I have one that arrived today. It works well on it's custom software but the software will not coexist with MuM on the same system.

Nothing to report yet. Hopefully soon. Luke and I both have some scrypt hardware bits on the way.

Phoenix48

newbie

Activity: 43

Merit: 0

Quote from: nwoolls on February 05, 2014, 03:16:53 PM

Quote from: Phoenix48 on February 04, 2014, 10:10:06 PM

Another problem is that when i start the 64 bits version, it runs fine for a while and then multiminer seems to pop up an error at random:

Code:

Consultez la fin de ce message pour plus de détails sur l'appel du débogage
juste-à-temps (JIT) à la place de cette boîte de dialogue.

************** Texte de l'exception **************
System.InvalidOperationException: La séquence contient plusieurs éléments correspondants.
   à System.Linq.Enumerable.Single[TSource](IEnumerable`1 source, Func`2 predicate)
   à MultiMiner.Engine.MiningEngine.setupProcessStartInfo(MinerProcess minerProcess) dans d:\Data\Visual Studio Projects\Personal\MultiMiner\MultiMiner.Engine\MiningEngine.cs:ligne 162
   à MultiMiner.Engine.MiningEngine.StoreMinerProcess(Process process, String coinSymbol, MinerConfiguration minerConfiguration, Int32 port) dans d:\Data\Visual Studio Projects\Personal\MultiMiner\MultiMiner.Engine\MiningEngine.cs:ligne 591

Hi there. I've looked into this further. Do you have two coin configurations with the same name (right-click and click Coins)? This error seems to imply that is the case. If so please remove one of them. Adding two with the same name shouldn't technically be possible within the UI but it sounds like maybe you still got this into your configuration file.

Yes, i have 2 Dogecoin and 2 Mooncoin in my list. Originally, the reason was when i switched from coinchoose to coinwarz. The difference in both API were (DOG) from coinchoose and (DOGE) from coinwarz. The same happened for Mooncoin (MOO) and (MOON). So when i switched to coinwarz (when coinchoose didn't work) it poposed to add the (DOGE) and (MOON). So i added them to be sure they could be mined.

So my question is this. If i remove one of each, will Multiminer mine them even if i am on the other API? As an example, if i remove Dogecoin (DOGE)(Which is coinwarz version) and keep Dogecoin (DOG)(coinchoose version) and use coinwarz just one day because coinchoose is out, will it use Dogecoin (DOG) or Multiminer won't mine that coin for that day? I am just trying to know if that make a difference in Multiminer and to know if it uses the coin denomination in any way to swith coin or if only the name matters and the denomination has no importance whatever which API we use.

nwoolls

hero member

Activity: 840

Merit: 1002

Quote from: soulistyce on February 05, 2014, 06:51:56 PM

i bought an Antminer U1 but cant get any accepted with it on multiminer,
effective hashrate extremely low
on the latest bfgminer i use only -S antminer:all --set-device antminer:clock=x0781 and it works well
but not working on multiminer,

Stop mining in MultiMiner. Show the Process Log screen. Then right-click the entry for bfgminer in the Process Log screen and click Launch. This will launch bfgminer with the same arguments MultiMiner is using. You should see the same results - that something is preventing it from getting successful shares.

Once its been mining for several minutes in bfgminer alone, post a screenshot of that window.

nwoolls

hero member

Activity: 840

Merit: 1002

Quote from: ManeBjorn on February 05, 2014, 05:32:32 PM

I know it is a longshot but any news on adding DualMiner support yet?
I have one that arrived today. It works well on it's custom software but the software will not coexist with MuM on the same system.

Nothing to report yet. Hopefully soon. Luke and I both have some scrypt hardware bits on the way.

soulistyce

hero member

Activity: 698

Merit: 511

i bought an Antminer U1 but cant get any accepted with it on multiminer,
effective hashrate extremely low
on the latest bfgminer i use only -S antminer:all --set-device antminer:clock=x0781 and it works well
but not working on multiminer,
Please help, What can i do???

ManeBjorn

legendary

Activity: 1288

Merit: 1004

I know it is a longshot but any news on adding DualMiner support yet?
I have one that arrived today. It works well on it's custom software but the software will not coexist with MuM on the same system.
Normally I would move it to a 2nd system but the mainboard had blown up on the 2nd one so a no go until I can get a new MB.

nwoolls

hero member

Activity: 840

Merit: 1002

Quote from: Raptor2213 on February 05, 2014, 04:22:01 AM

Admittedly, I'm pretty bad with Linux, but from what I've been finding, PPA repos are only compatible with Ubuntu, not Debian.

Looks like the correct instructions for Debian are here:
https://www.btcguild.com/index.php?page=support§ion=blockerupter
Seems to be working on my Pi.

This is the sort of thing that, if you were interested and had the time, you (or really anyone) could fix and then contribute back to the project.

Anyone can add to the documentation by forking the repository, making a change (say to the readme) and then sending a pull request back to me. I can give more instructions if anyone needs help.

nwoolls

hero member

Activity: 840

Merit: 1002

Quote from: Phoenix48 on February 04, 2014, 10:10:06 PM

Another problem is that when i start the 64 bits version, it runs fine for a while and then multiminer seems to pop up an error at random:

Code:

Consultez la fin de ce message pour plus de détails sur l'appel du débogage
juste-à-temps (JIT) à la place de cette boîte de dialogue.

************** Texte de l'exception **************
System.InvalidOperationException: La séquence contient plusieurs éléments correspondants.
   à System.Linq.Enumerable.Single[TSource](IEnumerable`1 source, Func`2 predicate)
   à MultiMiner.Engine.MiningEngine.setupProcessStartInfo(MinerProcess minerProcess) dans d:\Data\Visual Studio Projects\Personal\MultiMiner\MultiMiner.Engine\MiningEngine.cs:ligne 162
   à MultiMiner.Engine.MiningEngine.StoreMinerProcess(Process process, String coinSymbol, MinerConfiguration minerConfiguration, Int32 port) dans d:\Data\Visual Studio Projects\Personal\MultiMiner\MultiMiner.Engine\MiningEngine.cs:ligne 591

Hi there. I've looked into this further. Do you have two coin configurations with the same name (right-click and click Coins)? This error seems to imply that is the case. If so please remove one of them. Adding two with the same name shouldn't technically be possible within the UI but it sounds like maybe you still got this into your configuration file.

Raptor2213

full member

Activity: 210

Merit: 100

Quote from: nwoolls on July 02, 2013, 12:45:03 AM

Linux Installation (Debian-Based)

Install the latest version of Mono

Code:

sudo apt get install mono-complete

Install your chosen mining engine

Code:

sudo add-apt-repository ppa:unit3/bfgminer
sudo apt-get update
sudo apt-get install bfgminer

Download and extract the .zip file at the above Downloads link
Run MultiMiner.Win.exe using mono:

Code:

mono MultiMiner.Win.exe

Generic Mono Installation

Download and extract the zip file at the above Downloads link
Install bfgminer. For OS X, you can find packages and for doing so here and instructions for using them here.
Install X11. Under OS X you should install Xquartz available here.
Install the latest version of Mono.
Run MultiMiner.Win.exe using mono:

Code:

mono MultiMiner.Win.exe

Admittedly, I'm pretty bad with Linux, but from what I've been finding, PPA repos are only compatible with Ubuntu, not Debian.

Looks like the correct instructions for Debian are here:
https://www.btcguild.com/index.php?page=support§ion=blockerupter
Seems to be working on my Pi.

brooklynite

sr. member

Activity: 266

Merit: 250

nwoolls, here is a funny request, when the strategy kicks in to switch a coin, can you make the cards switch one at a time like on a 30 second stagger? Its a funny request but I think that way the noise change from the fans would be less noticeable. I had the rig running last night on 15min intervals and I was sleeping in the same room, I think I woke up a lot. I was so tired in the morning as if I had not slept much. During the day my wife was at home and she complained about the same noise issue. I know it doesnt happen when the same coin is still the best to be mined but still happens often.

Also an option to always mine the top two coins only would be great too. Here is why, coinchoose shows litecoin as #3 right now and that is so wrong, litecoin is like the 15th or lower rate coin on coinwarz all the time.

Topic: MultiMiner: Any Miner, Any Where, on Any Device (Free, Open Source, Cross Platform) - page 91. (Read 827303 times)