MultiMiner: Any Miner, Any Where, on Any Device (Free, Open Source, Cross Platform) - page 94.

nwoolls

hero member

Activity: 840

Merit: 1002

Quote from: ManeBjorn on February 03, 2014, 10:20:39 AM

I have another one of these crashes and I saved the report.
Can you point to the Github area to post it for you as I am not familiar with that end of it.

Click New Issue here if you don't see it already reported:

https://github.com/nwoolls/MultiMiner/issues?state=open

jml25

newbie

Activity: 40

Merit: 0

Things look good with 2.6 so far! Thanks as always for the release.

One thought- seeing my minepeon machine in the network area makes me sad I can't better control it - is there a thought down the road of being able to actually install MuM onto a distro that works on a pi?

Also, one of my machines seems to show the expected profit from the network machines, but the other machines do not. This machine also has no mining running off it at this time (well, two drillbit thumbs, but running on cgminer because I haven't had time to make the switch). Any thoughts as to why I can't see a rollup of the expected profit off all connected devices on the network? (I thought I saw this on one of your screenshots a page or two ago)

Thanks again!

ManeBjorn

legendary

Activity: 1288

Merit: 1004

I have another one of these crashes and I saved the report.
Can you point to the Github area to post it for you as I am not familiar with that end of it.

Quote from: nwoolls on February 02, 2014, 11:25:38 AM

Quote from: ManeBjorn on February 02, 2014, 11:11:16 AM

I'm getting unahandled exception errors today on the Win 8.1 system.

Please always post the details of unhandled exceptions either here or in a Github issue. I cannot fix them if I don't know what they are Sad

nwoolls

hero member

Activity: 840

Merit: 1002

Version 2.6 of MultiMiner is now available for download! This update includes the following:

Introducing Network Device Discovery: standalone mining devices on your network (such as the AntMiner S1) automatically show up in MultiMiner with zero configuration (devices themselves must allow RPC API access)
Add the ability to upgrade MultiMiner and bfgminer on all rigs at once via MultiMiner Remoting
Add the ability to Quick Switch coins on all rigs at once via MultiMiner Remoting
Implement failover support for Coin APIs - prefer CoinCoose.com or CoinWarz.com and fail over to the other
Switch from using Average to Current hashrate in totals (shown in the status bar and broadcast via MultiMiner Remoting)
Additional handling for Invalid Gateway (502) responses from remote APIs
Fixed the Stratum Proxy virtual device reporting Average hashrate as Current hashrate

Keep the feedback coming and happy mining! Grin

nwoolls

hero member

Activity: 840

Merit: 1002

Quote from: Powell on February 03, 2014, 04:25:34 AM

nwools 2.6 = awesomeness! All of my miners are standalone on the network. Is it possible for the software to do the donations that way? I wasn't 100% sure if its possible or not.

Unfortunately not. I tried to think of a way to tie the Network Devices to the Perks but really MultiMiner doesn't need to be mining at all to "see" the devices. So everyone gets it for free Grin

Powell

sr. member

Activity: 486

Merit: 262

rm -rf stupidity

nwools 2.6 = awesomeness! All of my miners are standalone on the network. Is it possible for the software to do the donations that way? I wasn't 100% sure if its possible or not.

nwoolls

hero member

Activity: 840

Merit: 1002

Quote from: brooklynite on February 03, 2014, 03:46:01 AM

nwoolls: I have to say your single click update of the software is Apple Inc quality.

Thanks this made my day Grin

brooklynite

sr. member

Activity: 266

Merit: 250

nwoolls: I have to say your single click update of the software is Apple Inc quality. Great job overall with everything you have done.

Raptor2213

full member

Activity: 210

Merit: 100

Quote from: bemocom on February 03, 2014, 03:30:33 AM

Hi

Is there a possibility to add Hex-Miners from Technobit.eu?
I have 5 boards and wanted to use MultiMiner but it doesn't work.

Thanks a lot

That's more of a question to ask the creator of the mining utility that MM uses in the background.
BFGminer's forum post lists TechnoBit HEX mining boards as "coming soon". Once they attain compatibility, you should be able to use it with MM. In the meantime, it looks like they're SHA-256, so you should be able to use them with the Stratum proxy that MM has built in.

bemocom

newbie

Activity: 15

Merit: 0

Hi

Is there a possibility to add Hex-Miners from Technobit.eu?
I have 5 boards and wanted to use MultiMiner but it doesn't work.

Thanks a lot

brooklynite

sr. member

Activity: 266

Merit: 250

Quote from: nwoolls on February 03, 2014, 03:01:35 AM

Quote from: Raptor2213 on February 03, 2014, 02:59:57 AM

I too would like it to cease suggesting coins that are less than the coin set to never mine anything less valuable than. I requested this a while back.

This is still on my to-do list, but I believe he is referring to having the strategies ignore coins that "spike" in profitability and then immediately fall back down (not the "coin suggestions" feature).

Exactly! Im talking about coins that SPIKE for a few seconds and once the massive pool owner reboots his system the coin drops deep down in the list to very un-profitable. Add that to the 15 minute delay coinwarz has then one would be spinning his wheels trying to ever catch 42 or Star for example at a low diff range.

This may be a bit hard to implement though. How would you know its a spike? I mean I know by now after looking at the list for a month, but how do you program it.

nwoolls

hero member

Activity: 840

Merit: 1002

Quote from: brooklynite on February 03, 2014, 03:07:58 AM

By the way did you consider moving the items out of the drop down and using the area highlighted below? It is pretty hard to click on those specially from a remote desktop. It also feel unnecessary to click twice instead of once.

If you click Settings > Advanced application settings, you can enable the option to Use a standard menu designed for accessibility, if you prefer that format.

Raptor2213

full member

Activity: 210

Merit: 100

Quote from: brooklynite on February 03, 2014, 03:07:58 AM

Thanks, I'm worried if I do average (I'm assuming its 24 hours) then I will be mining DOGE the whole year long lol.

Would that be so bad? Doge seems fairly profitable currently.

brooklynite

sr. member

Activity: 266

Merit: 250

Quote from: nwoolls on February 03, 2014, 03:00:05 AM

That you for the suggestion. In the meantime you can use Average Profitability rather than straight profitability to work around this.

Thanks, I'm worried if I do average (I'm assuming its 24 hours) then I will be mining DOGE the whole year long lol.

By the way did you consider moving the items out of the drop down and using the area highlighted below? It is pretty hard to click on those specially from a remote desktop. It also feel unnecessary to click twice instead of once.

Raptor2213

full member

Activity: 210

Merit: 100

Quote from: nwoolls on February 03, 2014, 03:00:05 AM

That you for the suggestion. In the meantime you can use Average Profitability rather than straight profitability to work around this.

Quick thought, does this option adjust for stales?

nwoolls

hero member

Activity: 840

Merit: 1002

Quote from: Raptor2213 on February 03, 2014, 02:59:57 AM

I too would like it to cease suggesting coins that are less than the coin set to never mine anything less valuable than. I requested this a while back.

This is still on my to-do list, but I believe he is referring to having the strategies ignore coins that "spike" in profitability and then immediately fall back down (not the "coin suggestions" feature).

nwoolls

hero member

Activity: 840

Merit: 1002

Quote from: brooklynite on February 03, 2014, 02:55:32 AM

Fantastic, thank you. I got it to work and it actually switched coins. Can it just scrape the coinwarz.com page? Or is that unethical? lol.

I wouldn't recommend that, no. They're API is, in my experience (and others if you read through this thread) more stable than CoinChoose.com. But CoinChoose.com is free and gives you options like Profitability Adjusted for Stales.

Quote from: brooklynite on February 03, 2014, 02:55:32 AM

So Coinchoose is free to use unlimioted? I dont know where to get the API for coinchoose.

No API key for CoinChoose.com - it's free.

Quote from: brooklynite on February 03, 2014, 02:55:32 AM

O and one more thing, you may want to add something to the code that ignores coins that pop up for a few minutes with lets say sudden -70% or -90% difficulty. These flash profitable coins usually don't last more than a few minutes probably while some pool owner reboots their computer or something. Then the coin dives down deep into the unprofitability zone deep down coinwarz. Starcoin is like that, so is 42 for example or bitbar.

That you for the suggestion. In the meantime you can use Average Profitability rather than straight profitability to work around this.

Raptor2213

full member

Activity: 210

Merit: 100

Quote from: brooklynite on February 03, 2014, 02:55:32 AM

Quote from: nwoolls on February 03, 2014, 02:25:09 AM

Quote from: brooklynite on February 03, 2014, 02:20:53 AM

Ok back to my issue, I got it running (I don't know what happened but the Start button that was grey suddenly became available). Anyway, I have it going but it doesnt do the checking for most profitable coin, it actually does not show any prices either. So its stuck on a very low profitability coin. The difficulty, exchange, profitability and the coin dont change at all as if it doesnt connect to coinwarz.

Click on Settings > Advanced service settings, then enable the notifications for API errors. I'm assuming there will be a CoinWarz API error notification that pops up after. Click the link to view the error.

Note that CoinWarz free API key limits you to 25 calls a day and 1,000 calls total. The pre-release I linked a few posts above has a new "failover" mechanism for the Coin APIs which may help with this (you can set it to prefer CoinChoose.com and fail over to CoinWarz.com).

Fantastic, thank you. I got it to work and it actually switched coins. Can it just scrape the coinwarz.com page? Or is that unethical? lol.

So Coinchoose is free to use unlimioted? I dont know where to get the API for coinchoose.

Thanks I will try the new version.

O and one more thing, you may want to add something to the code that ignores coins that pop up for a few minutes with lets say sudden -70% or -90% difficulty. These flash profitable coins usually don't last more than a few minutes probably while some pool owner reboots their computer or something. Then the coin dives down deep into the unprofitability zone deep down coinwarz. Starcoin is like that, so is 42 for example or bitbar.

Yes, coinchoose is free/unlimited. There is no API key.

I too would like it to cease suggesting coins that are less than the coin set to never mine anything less valuable than. I requested this a while back.

brooklynite

sr. member

Activity: 266

Merit: 250

Quote from: nwoolls on February 03, 2014, 02:25:09 AM

Quote from: brooklynite on February 03, 2014, 02:20:53 AM

Ok back to my issue, I got it running (I don't know what happened but the Start button that was grey suddenly became available). Anyway, I have it going but it doesnt do the checking for most profitable coin, it actually does not show any prices either. So its stuck on a very low profitability coin. The difficulty, exchange, profitability and the coin dont change at all as if it doesnt connect to coinwarz.

Click on Settings > Advanced service settings, then enable the notifications for API errors. I'm assuming there will be a CoinWarz API error notification that pops up after. Click the link to view the error.

Note that CoinWarz free API key limits you to 25 calls a day and 1,000 calls total. The pre-release I linked a few posts above has a new "failover" mechanism for the Coin APIs which may help with this (you can set it to prefer CoinChoose.com and fail over to CoinWarz.com).

Fantastic, thank you. I got it to work and it actually switched coins. Can it just scrape the coinwarz.com page? Or is that unethical? lol.

So Coinchoose is free to use unlimioted? I dont know where to get the API for coinchoose.

Thanks I will try the new version.

O and one more thing, you may want to add something to the code that ignores coins that pop up for a few minutes with lets say sudden -70% or -90% difficulty. These flash profitable coins usually don't last more than a few minutes probably while some pool owner reboots their computer or something. Then the coin dives down deep into the unprofitability zone deep down coinwarz. Starcoin is like that, so is 42 for example or bitbar.

nwoolls

hero member

Activity: 840

Merit: 1002

Quote from: brooklynite on February 03, 2014, 02:20:53 AM

Ok back to my issue, I got it running (I don't know what happened but the Start button that was grey suddenly became available). Anyway, I have it going but it doesnt do the checking for most profitable coin, it actually does not show any prices either. So its stuck on a very low profitability coin. The difficulty, exchange, profitability and the coin dont change at all as if it doesnt connect to coinwarz.

Click on Settings > Advanced service settings, then enable the notifications for API errors. I'm assuming there will be a CoinWarz API error notification that pops up after. Click the link to view the error.

Note that CoinWarz free API key limits you to 25 calls a day and 1,000 calls total. The pre-release I linked a few posts above has a new "failover" mechanism for the Coin APIs which may help with this (you can set it to prefer CoinChoose.com and fail over to CoinWarz.com).

Topic: MultiMiner: Any Miner, Any Where, on Any Device (Free, Open Source, Cross Platform) - page 94. (Read 827337 times)