Without the strap mod I am getting 29.3 at 2075 MHz 
Topic: My RX580 Benchmarking and Results: 30.5Mh/s @ 77.5W (+ 1130MH/s Dcr w/ 125W) - page 14. (Read 189842 times)
April 30, 2017, 06:50:40 PM
Micron refused to hash anything with the strap mod Without the strap mod I am getting 29.3 at 2075 MHz
Without the strap mod I am getting 29.3 at 2075 MHz April 30, 2017, 05:43:53 PM
What are the dual mine speeds? (stock and modded). All topics only mention ETH mining..
I've been continuing to tweak and also optimizing for dual mining.
So far:
Eth: 30.5 Mh/s
Dcr: 1130 MH/s
VDDC: 0.877
Core: 1300
Mem: 2100
Mem voltage: 0.9
Strap: Custom mix
Mem Errors: 0/min
Power: 125W
NOTE: If you don't undervolt/limit power, it easily dual mines 30.5 MH/s + 1450 MH/s Dcr
Can you post the custom timings string? These of course are the same chips as before some optimum strings have already been found, but I like this one due to only needing 2100 MHz
Very nice target to get 30.5 MHsCan use 0150E2A3186272E16">http://doreymills.ca/cgi-bin/strapmod?555000000000000022CC1C00AD515A3EC0570E142D4A64080049C700030114207A8900A00300000 0150E2A3186272E16
just plug in your own 1500, 1625, or 1750
Only for samsung or all others work too?
All work. I use 1750 modded in the tool for samsung, 1625 modded in the tool for hynix.. and elpida can be iffy so 1625 on the higher clocking elpida and 1500 on the lower elpida
(I used to use 1500 for hynix but im getting better results with the modded 1625 now)
I will now try my micron mix on that.
April 30, 2017, 05:14:49 PM
What are the dual mine speeds? (stock and modded). All topics only mention ETH mining..
I've been continuing to tweak and also optimizing for dual mining.
So far:
Eth: 30.5 Mh/s
Dcr: 1130 MH/s
VDDC: 0.877
Core: 1300
Mem: 2100
Mem voltage: 0.9
Strap: Custom mix
Mem Errors: 0/min
Power: 125W
NOTE: If you don't undervolt/limit power, it easily dual mines 30.5 MH/s + 1450 MH/s Dcr
Can you post the custom timings string? These of course are the same chips as before some optimum strings have already been found, but I like this one due to only needing 2100 MHz
Very nice target to get 30.5 MHsCan use 0150E2A3186272E16">http://doreymills.ca/cgi-bin/strapmod?555000000000000022CC1C00AD515A3EC0570E142D4A64080049C700030114207A8900A00300000 0150E2A3186272E16
just plug in your own 1500, 1625, or 1750
Only for samsung or all others work too?
All work. I use 1750 modded in the tool for samsung, 1625 modded in the tool for hynix.. and elpida can be iffy so 1625 on the higher clocking elpida and 1500 on the lower elpida
(I used to use 1500 for hynix but im getting better results with the modded 1625 now)
April 30, 2017, 04:41:56 PM
What are the dual mine speeds? (stock and modded). All topics only mention ETH mining..
I've been continuing to tweak and also optimizing for dual mining.
So far:
Eth: 30.5 Mh/s
Dcr: 1130 MH/s
VDDC: 0.877
Core: 1300
Mem: 2100
Mem voltage: 0.9
Strap: Custom mix
Mem Errors: 0/min
Power: 125W
NOTE: If you don't undervolt/limit power, it easily dual mines 30.5 MH/s + 1450 MH/s Dcr
Can you post the custom timings string? These of course are the same chips as before some optimum strings have already been found, but I like this one due to only needing 2100 MHz
Very nice target to get 30.5 MHsCan use 0150E2A3186272E16">http://doreymills.ca/cgi-bin/strapmod?555000000000000022CC1C00AD515A3EC0570E142D4A64080049C700030114207A8900A00300000 0150E2A3186272E16
just plug in your own 1500, 1625, or 1750
Only for samsung or all others work too?
April 30, 2017, 04:20:55 PM
not good results at all.
my power color red dragon rx480 8mb is doing 30mhs@70w (gpu-z), sapphire ref-like rx470 is doing 28.8@73w (gpu-z) - ethereum only mode
my power color red dragon rx480 8mb is doing 30mhs@70w (gpu-z), sapphire ref-like rx470 is doing 28.8@73w (gpu-z) - ethereum only mode
did you set the timings straps to 2000 ? or just OC ? or both of them
rx480 is clocked 1170/2050, rx470 1100/1980. voltage 0.88-0.9. Very stable and happy ))
and the queen - sapphire nitro+ 480 8gb samsung 1170/[email protected] @ 80w gpu-z 31.5mhs eth
April 30, 2017, 04:04:46 PM
What are the dual mine speeds? (stock and modded). All topics only mention ETH mining..
I've been continuing to tweak and also optimizing for dual mining.
So far:
Eth: 30.5 Mh/s
Dcr: 1130 MH/s
VDDC: 0.877
Core: 1300
Mem: 2100
Mem voltage: 0.9
Strap: Custom mix
Mem Errors: 0/min
Power: 125W
NOTE: If you don't undervolt/limit power, it easily dual mines 30.5 MH/s + 1450 MH/s Dcr
Can you post the custom timings string? These of course are the same chips as before some optimum strings have already been found, but I like this one due to only needing 2100 MHz
Very nice target to get 30.5 MHsCan use 0150E2A3186272E16">http://doreymills.ca/cgi-bin/strapmod?555000000000000022CC1C00AD515A3EC0570E142D4A64080049C700030114207A8900A00300000 0150E2A3186272E16
just plug in your own 1500, 1625, or 1750
April 30, 2017, 04:02:28 PM
What are the dual mine speeds? (stock and modded). All topics only mention ETH mining..
I've been continuing to tweak and also optimizing for dual mining.
So far:
Eth: 30.5 Mh/s
Dcr: 1130 MH/s
VDDC: 0.877
Core: 1300
Mem: 2100
Mem voltage: 0.9
Strap: Custom mix
Mem Errors: 0/min
Power: 125W
NOTE: If you don't undervolt/limit power, it easily dual mines 30.5 MH/s + 1450 MH/s Dcr
Can you post the custom timings string? These of course are the same chips as before some optimum strings have already been found, but I like this one due to only needing 2100 MHz
Very nice target to get 30.5 MHs April 28, 2017, 12:04:21 AM
How the hell can you guys mine that high with such a low power consumption ?!
My MSI 580 Gaming X is pulling 28 mh/s + 1100mh/s DCR and it takes around 200watts
Would anyone want to give me an overclocking lesson? I guess it could be very usefull and I could pay for it...
My MSI 580 Gaming X is pulling 28 mh/s + 1100mh/s DCR and it takes around 200watts
Would anyone want to give me an overclocking lesson? I guess it could be very usefull and I could pay for it...
Undervolting the piss out of your card, and balancing how much performance you're willing to give up.
Consider:
1MH/s ETH = 30W
10MH/s DCR = 6W
(obviously these figures change and are dependent on your local electricity prices, but is a good guide)
What this means is that if you sacrifice less than 1MH/s Eth and save 30W, you're profiting. So if you clock down to 1100mhz lets say and dual mine 27mh/s and 1000mh/s DCR, but this lets you drop your core coltage down to 0.8 and you now only pull 150watts, you're profiting (and extending the life of the card)
April 27, 2017, 11:11:48 PM
How the hell can you guys mine that high with such a low power consumption ?!
My MSI 580 Gaming X is pulling 28 mh/s + 1100mh/s DCR and it takes around 200watts
Would anyone want to give me an overclocking lesson? I guess it could be very usefull and I could pay for it...
I never have do Biosmod but i see that is something with Power Limit + Core Clock + Core Voltage. Look at youtube (It's free)My MSI 580 Gaming X is pulling 28 mh/s + 1100mh/s DCR and it takes around 200watts
Would anyone want to give me an overclocking lesson? I guess it could be very usefull and I could pay for it...
April 27, 2017, 10:08:58 PM
How the hell can you guys mine that high with such a low power consumption ?!
My MSI 580 Gaming X is pulling 28 mh/s + 1100mh/s DCR and it takes around 200watts
Would anyone want to give me an overclocking lesson? I guess it could be very usefull and I could pay for it...
My MSI 580 Gaming X is pulling 28 mh/s + 1100mh/s DCR and it takes around 200watts
Would anyone want to give me an overclocking lesson? I guess it could be very usefull and I could pay for it...
April 27, 2017, 09:52:39 PM
How much reduces timelife of GPU when you biosmod it?
Also you've a picture of Dualmining? Just for P0rn
Also you've a picture of Dualmining? Just for P0rn
April 26, 2017, 08:36:50 PM
anyone tried mixing a RX 480 with the RX 580 and run with mining?
April 26, 2017, 04:57:30 PM
Anyone got a list of which 5xx cards use samsung memory?
or is the sapphire 580 8gb nitro LE the only one?
EDIT:
seems that the LE version can be hynix too... what a minefield.
http://cryptomining-blog.com/8623-crypto-mining-with-sapphire-nitro-radeon-rx-580-limited-edition/
or is the sapphire 580 8gb nitro LE the only one?
EDIT:
seems that the LE version can be hynix too... what a minefield.
http://cryptomining-blog.com/8623-crypto-mining-with-sapphire-nitro-radeon-rx-580-limited-edition/
April 26, 2017, 04:28:57 PM
Wow that's interesting. I wonder if gpuz shows which chip you have.. and if like all gpus of a certain model (like for example msi 570 4gb armor) are all the same "chip type"
Some cards with XTR chip:
MSI Radeon RX 580 Gaming X+
Asus ROG Strix Radeon RX 580 TOP
Aorus Radeon RX580 XTR
Sapphire Nitro+
XFX GTR-S Black Edition
Source (finnish, sorry guys):
https://www.io-tech.fi/artikkelit/amd-radeon-rx-580-570-polaris-20/
April 26, 2017, 04:00:39 PM
from what i saw in articles is that the xtx is the 580 and the xtl is the 570...
There are 580's with XTX and XTR chips, XTR ones are more or less handpicked with lower default voltage and higher clocks. This is all we know so far, this is undocumented feature.
Wow that's interesting. I wonder if gpuz shows which chip you have.. and if like all gpus of a certain model (like for example msi 570 4gb armor) are all the same "chip type"
April 26, 2017, 11:51:37 AM
What drivers are you guys using for the 570 with the mod ROM? Any issues with RELIVE due to MOD roms?
I'm using the leaked press release drivers because I'm having issues with the newest drivers on Claymore
http://forums.guru3d.com/showthread.php?p=5420996
April 26, 2017, 07:39:15 AM
from what i saw in articles is that the xtx is the 580 and the xtl is the 570...
There are 580's with XTX and XTR chips, XTR ones are more or less handpicked with lower default voltage and higher clocks. This is all we know so far, this is undocumented feature.
April 26, 2017, 07:18:06 AM
from what i saw in articles is that the xtx is the 580 and the xtl is the 570...
April 26, 2017, 06:27:31 AM
This may be old news but did you guys know there are two versions of polaris 20, XTX and XTR?
April 26, 2017, 01:53:55 AM
Can someone share edited rom for RX 580?
Jump to: