Topic: Nanopool now has an Electroneum pool! - page 3. (Read 5928 times)

All Nanopools down, or is it just the website?

Good news!
After a very long wait my 1000 ETN coins made it into Cryptopia from Nanopool.
I was a little worried but all ended well.
Now the min limit is 500 so next batch is moving over soon. We will see how long this one takes...

I hope its miscalculation i just want to know that i dont everything as it should be.

I am sorry, i didn't say it correctly. I want to identify my rigs as 2 seperate workers, so i can have more clear preview of results @nanopool.

I also sent email, yesterday, still waiting for response.

Yout *.bat looks good. Look on Claymore's site, they have list of switches that you can use to identify GPUs. As far as H/s, this guys are getting swamped now (since NH hack) so there might be some glitches in calculation on their end. I am dealing with similar issue on another pool. I emailed them but still waiting to get the answer from their admin.

I registered just to post question, i am mining currently on nanopool, and i have 2 rigs mining ETN @ ~4250H/s each, so 8.5KH/s both, it never drops below it. For some reason current calculated hashrate is well below it at ~7140H/s and avg in last 6hours is ~7600H/s. This will be 20 hours since i started mining there and mined 294ETN which should give total for 24hours 350ETN.

At current difficulty as i am posting this (12512478072), i should be getting 420 (with 8.5KH/s) or am i not correct?

I previously mined ETH with nanopool and i didnt have those kind of problems, calculations always matched nanopool payout (1-2% up down). Am i doing something wrong or its just how it is?

My start_etn.bat file looks like this:

NsGpuCNMiner.exe -xpool stratum+ssl://etn-eu1.nanopool.org:13433 -xwal (walletAddress) -xpsw x -allpools 1

Also if someone could help me to identify my rigs (as different workers), do i just put DOT after wallet address or? Since at bottom page states 0 online, 0 offline and 0 total, i don't know if that can be an issue?

Thanks in advance

edit: I also forgot to add that rigs are working on lower temperatures than when they mine ETH (was 66-70), 57-64C, is that normal?

I'm having a problem with my payout to my private wallet. I set up my wallet-cli and mined to that address. I received a payout from nanopool yesterday but it never showed up to my wallet. I made sure to sync the wallet but no luck, still balance is 0.
Any suggestions?

thanks for the heads up ^^

I actually had no worries at first, then I noticed the cryptopia (dont mine to this address) and got concerned.. as an update, I actually did receive my payout a bit ago, so as metnioned ^ looks like just a wallet issue on cryptopia.. thanks again for the reply!

Electroneum in Cryptopia is under maintenance, due to Withdrawal issue, seems they are making changes on their wallet server.

We just have to wait, for the meantime I guess avoid withdrawing and depositing ETN in cryptopia.


https://www.cryptopia.co.nz/CoinInfo/?coin=ETN

Just filter ETN

Could you clarify if the transaction took 3 hours to confirm on nano as well or did nano say confirmed...  hours for cryptopia? I've had a handful of payouts since I started mining ETN and so far everything has been really quick, today though I have a confirmed trans on nano and still not even a pending on cryptopia. I am a bit worried about the fact that cryptopia does say do not mine to it (will they see 500 ETN getting sent very periodically and start questioning it? or is that just a liability thing that they can say... well we told you not to do that if something goes wrong).

As far as other posts with hashrates etc, I am slightly above whattomine estimates, my hashrate doesn't close to match (from miner to site) but I understand that the hashrate as viewed from the site is based on shares and shares are a function of variance based on the pool hashrate and overall hashrate of the coin... even a fairly big miner will see big variance here.

If one wanted to, they could come up with confidence intervals for periods of time. It makes absolutely no sense that one pool rewards more than another if they are all playing fair and using the same script (and not a horrible service that misses shares, stale shares, goes down etc). A small pool WILL take longer to find a block, but come on guys, let's think about this... if 20 people share a block every hour or if 200 people share a block every 6 mins      Absolutey do pay attention to down time or missed/stale shares, I have seen this change pool to pool, I would be lying if I said I fully understand the stale share thing, but I have seen less on nano than some others, haven't explored all that many though to be honest, I really like the nano interface.

Cryptopia was having issues this morning. It took 3+hrs for my transfer to clear.

I have never seen so many newbies try to mine this coin in my life.  Its insane.  There is nothing wrong with being new, but this coin just oddly seems like its all new people mining it.  Anyway, the first issue is mining to Cryptopia.  Get the ETN wallet.  That way you won't be wondering if its the exchange or the pool.  I can tell you right now though, (as tadeus1 said right before me) the issue is with the static difficulty.  120k is massive.  So unless your hashrate is over 5000 h/s, don't bother.  I've always read that difficulty doesn't really matter and that it all evens out in the end, so you should still be getting the same returns but you are going to have to look at a much higher time frame.  Instead of comparing your 24 hour returns, you are going to have to compare your 1 week+ returns.

The main problem seems Nanopool scheme is good for the Bigger miners.
That is why I think smaller miners get smaller profits vs what they estimated or what they used to get on the other smaller pools.
Mainly because of static high difficulty and share ratio and the fact some very big miners are on Nanopool.

Imagine one having 12-13000 hashes (there are miners in nanopool with even 1,000,000 hashrate) vs one having 2000 hashes.

That has always been the thing with mining.
Go mine on a pool where most of the miners have similar rate to yours or at least there are not that many miners who have much higher rate than yours. And of course you have to take into account the time to find blocks on smaller pools. 

How much time did past from payment Nanopool to Cryptopia? I'm waiting for over a hour and got enough confirmations but not showing in deposit history.

it is nor working for me. When i start the miner it sees only 2 gpus from 6 and stops. for eth it works fine.

For me it's the opposite:

12247 H/sec. (six Vega 64)

Whattomine: 494.77 ETN per 24hr
Nanopool: 525.27 ETN per 24hr

I think it depends on how long you've been mining. My nanopool readings were off for the first day or so... now I'm at 120+ hours continuous mining, and constantly beating whattomine calculations.

Oh thank you for this information i like nanopool for eth mining. Now they have ETN too.

Can anyone explain the difference?

Nanopool 24h reward: 4180 etn/day
Whattomine calculated reward: 5586 etn/day

Just to follow up on my post. It seems it was some cryptopia hiccup. Funds cleared and are on my cryptopia account balance.  


I am selling as much as I can mine right now as price will likely drop when more funds released. I will buy back or mine and hodl couple thousands just in case it make it high. There is clearly some growth potential in this coin in my opinion.

Hope to reach my 500 ETN payout limit before the wallets go online .
Also, will probably buy back in when the price of ETN is flooring

I am mining it and I can tell you that it has a good profit!
What can you tell about its potential growth in the future?