Nanopool now has an Electroneum pool! - page 4.

mxrz

newbie

Activity: 6

Merit: 0

Quote from: EMWEE on December 11, 2017, 11:01:51 AM

I think its cryptopia. I had the same problem last week and today i send to deposits and still nothing. Just wait u will get your ETN's on your account. Im wondering if i will switch to nanopool. I have used nanopool for coins like ETH and XMR but im now mining ETN on electroneum.space. Its very unstable but i guess i will not be mining ETN anymore after the ICO wallets get unlocked.

I'm really happy with the ETN nanopool, I'm getting exactly what the calculator says I should be with my 12.5K H/sec. rig, and it's been perfectly stable for me for the past week. But as you mentioned, it may become much less profitable than XMR in a couple of days, when they relaunch the wallets and people dump their coins. This is why I'm worried about my delayed deposit on Cryptopia, as I would like to trade for LTC or even DOGE, before the relaunch.

smoolae

full member

Activity: 602

Merit: 106

Hmmm... network difficulty has declined a bit

preda

sr. member

Activity: 756

Merit: 250

Quote from: P00P135 on December 11, 2017, 10:07:31 AM

Quote from: FloppyPurpleGherkin on December 11, 2017, 09:30:05 AM

I'm getting better results on this pool for ETN http://ocukminingpool.com/# 0.2% fee too!

Better results? only 3 blocks found and last one was 8hrs ago... ok

ahhahaahahaahah maybe he manage that pool Grin

EMWEE

full member

Activity: 238

Merit: 102

I think its cryptopia. I had the same problem last week and today i send to deposits and still nothing. Just wait u will get your ETN's on your account. Im wondering if i will switch to nanopool. I have used nanopool for coins like ETH and XMR but im now mining ETN on electroneum.space. Its very unstable but i guess i will not be mining ETN anymore after the ICO wallets get unlocked.

Tao1123

newbie

Activity: 56

Merit: 0

Hello all,

Just a quick question. According to calculators I should be getting 23 ETN per hour. However, I have been mining on Nanopool for 12 hours now and am only averaging 14 per hour. Any idea why I am missing 9 ETN an hour? I have 10.4 KH/s. I averaged 1100 shares per hour over that 12 hour timeframe. I feel like I am losing coins somehow and wasn't sure if anyone else is noticing a significant difference between what you should be getting vs what you are actually getting.

mxrz

newbie

Activity: 6

Merit: 0

Quote from: silios on December 11, 2017, 07:34:41 AM

It works fine, (at least for now) and the payments turn up quite fast on cryptopia.
Make sure you have, the wallet_adress.id_string (provided by cryptopia) in the miner configuration.

On a side note, watch out for those pesky network fees of BTC which are on the rise again and cryptopia wants 0.002btc for each TX.....

It worked fine for me as well on Saturday. Payment showed up on Cryptopia within 5 minutes. But this morning, payment confirmed on Nanopool, but 1 hour and 30 minutes counting, nothing on Cryptopia Sad

I'm afraid if I submit a ticket, they'll just tell me I shouldn't be mining to my Cryptopia account, but clearly it should work... 12 of the top 15 miners on the ETN Nanopool are mining to Cryptopia.

P00P135

full member

Activity: 1126

Merit: 136

Quote from: FloppyPurpleGherkin on December 11, 2017, 09:30:05 AM

I'm getting better results on this pool for ETN http://ocukminingpool.com/# 0.2% fee too!

Better results? only 3 blocks found and last one was 8hrs ago... ok

FloppyPurpleGherkin

jr. member

Activity: 309

Merit: 2

I'm getting better results on this pool for ETN http://ocukminingpool.com/# 0.2% fee too!

Marvell2

full member

Activity: 1148

Merit: 132

Quote from: mk111 on December 11, 2017, 08:16:46 AM

Nanopool is stable yes but the last day the profitability is very weird.
The previous two days I made 500ETN per day but yesterday only 250 ETN for the day.

yeah i think nano pool steals coins somehow , but with all the other pools being so unsteady
kinda have no choice.

Im working on a windows too that will automatically read a text file of all your rigs Ip addresses and
then stop the claymore or ccminer app, copy over a local new pool file or basically any file you want and then
run that file all via a few clicks.

it will then run the newly coppied batch file, again any name you put in the text box

Im tired of using the claymor tool way to change pools and that does not work for my ccminer rigs anyways
i have most of it done just testing now.

that should making switching pools for all rigs pretty much effortless on windows boxes.

jyakulis

sr. member

Activity: 469

Merit: 250

J

I take back what I said. After all unconfirmed transactions came in after 2.5 hours profits were close to estimates on this pool.

I will mine here again once I see how this wallet release shakes out.

mk111

jr. member

Activity: 230

Merit: 1

Nanopool is stable yes but the last day the profitability is very weird.
The previous two days I made 500ETN per day but yesterday only 250 ETN for the day.

Good_Boy

full member

Activity: 784

Merit: 100

I like this pool - Nanopool. The more coins will be presented on it, the better. Waiting for other coins.

parisbitcoin

newbie

Activity: 39

Merit: 0

the pool is stable and throughput is steady !!!
I think they are less efficient that other pools however you get atleast stability and long term mining without having to worry about your pool going down !
The minimum payment is too high though... 500 ETN minimum (1000 by default)

silios

newbie

Activity: 17

Merit: 0

Quote from: patnor101 on December 11, 2017, 06:58:18 AM

Anybody had any luck withdraw from nanopool to cryptopia? When I check stats on nano it show quite a lot of miners with cryptopia address so it probably work otherwise why would they bother. How long does it take for ETN to show up on cryptopia? I am asking as I tried withdraw some amount and while it show payment confirmed in nano stats nothing came to my cryptopia address. I am waiting like 2 hours so far nothing.

It works fine, (at least for now) and the payments turn up quite fast on cryptopia.
Make sure you have, the wallet_adress.id_string (provided by cryptopia) in the miner configuration.

On a side note, watch out for those pesky network fees of BTC which are on the rise again and cryptopia wants 0.002btc for each TX.....

patnor101

brand new

Activity: 0

Merit: 0

Anybody had any luck withdraw from nanopool to cryptopia? When I check stats on nano it show quite a lot of miners with cryptopia address so it probably work otherwise why would they bother. How long does it take for ETN to show up on cryptopia? I am asking as I tried withdraw some amount and while it show payment confirmed in nano stats nothing came to my cryptopia address. I am waiting like 2 hours so far nothing.

EMWEE

full member

Activity: 238

Merit: 102

Don't mine directly to Cryptopia! It doesn't work.

Johny101010

full member

Activity: 218

Merit: 100

Quote from: clems on December 10, 2017, 03:45:47 PM

Quote from: Johny101010 on December 10, 2017, 02:11:26 PM

I have a problem mining etn with claymore on nanopool. It started and runs great for about 30 minutes and than it takes the hashrate to 0 for all the cards. Sgminer and xmr stack do not do that.
Anyone else have the same issue. It also only happens in nanopool.

Looks like devfee from Claymore can't get nicehash pool and miner crash? Do you check the log?

I'm using simple mining os in this rig so I can't see the full log.

Saphire

full member

Activity: 602

Merit: 114

Quote from: mojoxc on December 09, 2017, 07:26:52 PM

Quote from: Saphire on December 09, 2017, 04:25:24 PM

Quote from: Pennywis3 on December 09, 2017, 02:56:52 PM

Usually you put +diff at the end of your username, but not all pools allow custom diff.
Also when using custom diff. be careful not to have it too low, some pools might ban you for spamming too much shares.

Can you white down your Nanopool .bat file for Claymore pls.

NsGpuCNMiner -xpool stratum+tcp://etn-us-west1.nanopool.org:13333 -xwal (wallet) -allpools 1 -xpsw z -r >30

What about the diff promt? How do we set custom diff ?
thanks.

clems

member

Activity: 171

Merit: 10

Quote from: Johny101010 on December 10, 2017, 02:11:26 PM

I have a problem mining etn with claymore on nanopool. It started and runs great for about 30 minutes and than it takes the hashrate to 0 for all the cards. Sgminer and xmr stack do not do that.
Anyone else have the same issue. It also only happens in nanopool.

Looks like devfee from Claymore can't get nicehash pool and miner crash? Do you check the log?

clems

member

Activity: 171

Merit: 10

This pool is stable considering the unstability of the ETN network + ssl support.
Since I move to nanopool ETN pool no more error in Claymore about memory and less orphan block.

Topic: Nanopool now has an Electroneum pool! - page 4. (Read 5928 times)