NBMiner v42.2, 100% LHR unlock for ETH mining ! - page 28.

nebutech

member

Activity: 134

Merit: 26

Quote from: softerthansteel on March 06, 2019, 11:18:27 AM

v21: CUDA Error: no kernel image is available for execution on the device (err_no=209)

2080Ti, latest drivers 419.35

v20: works fine!

Any suggestions?

Sorry guys, v21.0 does not support 20 series cards for now.

Bucheran

newbie

Activity: 11

Merit: 0

Quote from: softerthansteel on March 06, 2019, 11:18:27 AM

v21: CUDA Error: no kernel image is available for execution on the device (err_no=209)

2080Ti, latest drivers 419.35

v20: works fine!

Any suggestions?

same problem

QuaLiTyX

newbie

Activity: 38

Merit: 0

Not working on RTX 2080ti. I got a "kernel image" error.

evlo

jr. member

Activity: 155

Merit: 4

BTW on linux i'm getting about same (well, pretty much EXACTLY SAME

) hashrate on 1060s as on win10.

I guess I should be getting lower as other miner sw authors claim the win10 can't use all the gpu memory? But definitely can't get over 3 per GPU. Definitely not 3.15 - still better then bMiner thought as he claim 3.3 and I can get 2.6 or maybe 2.7 max.
Can CPU be bottle neck? I do run the cheapest celerons that were available at the time. Maybe it is because of Micron and not Samsung memory cards?

I think this performance is on par with gminer. Both gMiner and bMiner can't start on windows10 at all thought (because of the GPU memory limit they claim).

OC settings visible in screenshot.

softerthansteel

newbie

Activity: 5

Merit: 0

v21: CUDA Error: no kernel image is available for execution on the device (err_no=209)

2080Ti, latest drivers 419.35

v20: works fine!

Any suggestions?

nebutech

member

Activity: 134

Merit: 26

Quote from: Dr_Victor on March 06, 2019, 09:12:07 AM

Quote from: nebutech on March 06, 2019, 08:57:14 AM

Quote from: Dr_Victor on March 06, 2019, 08:56:26 AM

Can I use this miner on C31 for GTX 1080ti/win 10?

Yes, it works.

Have you got 1.4+ speed?

Yes, as I mentioned above, however, the reference performance (1.45g/s cuckatoo31 on 1080ti) was tested under Linux system.

Miner hashrate may vary under windows, due to some issue that I am trying to find out.

Dr_Victor

sr. member

Activity: 954

Merit: 250

Quote from: nebutech on March 06, 2019, 08:57:14 AM

Quote from: Dr_Victor on March 06, 2019, 08:56:26 AM

Can I use this miner on C31 for GTX 1080ti/win 10?

Yes, it works.

Have you got 1.4+ speed?

nebutech

member

Activity: 134

Merit: 26

Quote from: Dr_Victor on March 06, 2019, 08:56:26 AM

Can I use this miner on C31 for GTX 1080ti/win 10?

Yes, it works.

Dr_Victor

sr. member

Activity: 954

Merit: 250

Can I use this miner on C31 for GTX 1080ti/win 10?

evlo

jr. member

Activity: 155

Merit: 4

I also found out that in version 20 I get 2.7 across all GPUs on that rig, while 21 behaves as I posted above. So at least now we can be sure it is just in the latest version

nebutech

member

Activity: 134

Merit: 26

Quote from: evlo on March 06, 2019, 08:16:53 AM

Thank you!

If it is any help I noticed huge power draw fluctuations on the most affected cards - i don't use power limiter, only undervolting, and loads goes to to 27w sometimes and then get back to 65w. Dunno if it is useful info for debugging.

Hopefully it is not related to windows being 1809, but so far I see it as biggest difference of the affected rig.

Every bit of information helps.

Thanks.

evlo

jr. member

Activity: 155

Merit: 4

Thank you!

If it is any help I noticed huge power draw fluctuations on the most affected cards - i don't use power limiter, only undervolting, and loads goes to to 27w sometimes and then get back to 65w. Dunno if it is useful info for debugging.

Hopefully it is not related to windows being 1809, but so far I see it as biggest difference of the affected rig.

nebutech

member

Activity: 134

Merit: 26

Quote from: evlo on March 06, 2019, 07:58:26 AM

some gpus on 1 of my rigs have bad perofrmance, on my other rigs i got from 2.7 to 2.9-3.0, which is equal to linux perf.
+ you can see that even "better" gpus after nr. 5 get 2.5 g/s instead of 2.9 g/s that is min for all the other gpus on all the other rigs and firs 5 gpus on this rig.

I'm running conservative OC and UV.
CPU load is unusually low for grin29. IMO.

Differences of the affected rig: windows 1809, h110 motherboards, others re window 1703 (i think) and biostar b250 (i think) motherboards

I think that in previous nbminer versions I would get 2.7 on all gpus on that rig, but i'm not sure, i will try nbminer before 20 or so to verify.

Any idea?

It is weired what happened.

There are other users who reported similar situations like this.

The reference performances table are tested under linux.

I will check the compatibility issue on Windows.

Hopes to fix this soon.

evlo

jr. member

Activity: 155

Merit: 4

some gpus on 1 of my rigs have bad perofrmance, on my other rigs i got from 2.7 to 2.9-3.0, which is equal to linux perf.
+ you can see that even "better" gpus after nr. 5 get 2.5 g/s instead of 2.9 g/s that is min for all the other gpus on all the other rigs and firs 5 gpus on this rig.

I'm running conservative OC and UV.
CPU load is unusually low for grin29. IMO.

Differences of the affected rig: windows 1809, h110 motherboards, others re window 1703 (i think) and biostar b250 (i think) motherboards

I think that in previous nbminer versions I would get 2.7 on all gpus on that rig, but i'm not sure, i will try nbminer before 20 or so to verify.

Any idea?

nebutech

member

Activity: 134

Merit: 26

Quote from: robo2 on March 03, 2019, 01:45:43 PM

Hi
asrock H110 Pro BTC
5xRTX 2080
BTM
Windows 10 -crash seldom and restart computer
Windows 8.1 only crash
so install windows 7 - drivers have been installed well, windows sees graphics cards but miners do not detect cards and fans are spinning all the time.

What's the problem?

Never heard of such things happened.

Try new version?

nebutech

member

Activity: 134

Merit: 26

Quote from: Benutzer2 on March 03, 2019, 12:43:29 PM

Hi my titan Vs crash.. please help

v20.0 does not support ttv

v21.0 supports, but not using its tensorcores.

No future plans for supporting tensorcores on volta cards.

nebutech

member

Activity: 134

Merit: 26

v21.0 upadted Grin

Bucheran

newbie

Activity: 11

Merit: 0

https://www.akminer.com/all-products/new-antminer-b7-96kh
this is the end(((

robo2

newbie

Activity: 56

Merit: 0

Hi
asrock H110 Pro BTC
5xRTX 2080
BTM
Windows 10 -crash seldom and restart computer
Windows 8.1 only crash
so install windows 7 - drivers have been installed well, windows sees graphics cards but miners do not detect cards and fans are spinning all the time.

What's the problem?

Benutzer2

newbie

Activity: 34

Merit: 0

Hi my titan Vs crash.. please help

Topic: NBMiner v42.2, 100% LHR unlock for ETH mining ! - page 28. (Read 54340 times)