BTW, it has been mentioned that it is not anymore allowed to write own account address here, coz it may cause a ban. But it can be go around by keeping the account address in the signature.
What is the rule, which is causing this?
Is it this https://bitcointalk.org/index.php?topic=434310.0 ?
"Specifically, you are not allowed to give people any incentive to post insubstantial posts in your threads. You can't offer to pay people who post their addresses, usernames, etc. "
If that is the rule, then a post [ "Give me NEMs" + signature with account details ] is breaking the rule, I think. Or not?
Topic: NEM (XEM) Official Thread - 100% New Code - Easy To Use APIs - page 1609. (Read 2985369 times)
October 25, 2014, 05:47:36 PM
October 25, 2014, 05:30:44 PM
Could I have some Test Nem please?
October 25, 2014, 05:29:27 PM
oi can anyone tell me if this is s full address size? (for creating "real address")
xxxxxx-xxxxxx-xxxxxx-xxxxxx-xxxxxx-xxxxxx-xxxx
It says to make sure you copy the whole thing. I sent before i triple checked and sent something this length. looks same size as the beta address I have..
xxxxxx-xxxxxx-xxxxxx-xxxxxx-xxxxxx-xxxxxx-xxxx
It says to make sure you copy the whole thing. I sent before i triple checked and sent something this length. looks same size as the beta address I have..
Looks good to me. It should start with an N.
It does, thanks for the reply!
October 25, 2014, 05:18:31 PM
Hi Under 'Boot Local Node', what should the Node name be?
October 25, 2014, 05:17:06 PM
Test nem Please? 
October 25, 2014, 05:08:14 PM
can 2 people pm me who have their clients up and running.. want to test multiple people harvesting on one nis but not sure if i should post the IP publicly..
October 25, 2014, 05:05:14 PM
The problem is overcome through a reboot. But she was. And it was, I do not know.
October 25, 2014, 04:01:17 PM
On account of a 5M. Send 4700 000. He writes: "Your account does not have enough funds to send this amount NEM".
A sum of up to 1M go.
Second time comes this story. First time as it is self-recovered after a while ...
A sum of up to 1M go.
Second time comes this story. First time as it is self-recovered after a while ...
I just did a transaction sending 49 997 995 NEM (+2005 NEM fee) from a 50M account. It worked.
October 25, 2014, 02:44:51 PM
Not sure if I should post this here or in the official forum, but hey here goes!
Would it be possible for one of the devs to please list the steps needed to run NIS headless? By this I mean NIS on a remote machine running 24x7 where a NCC can use it remotely periodically?
I have a RaspberryPi running NIS but it is not clear how to start and boot NIS.
Thanks
KC
open port 7890 on the rasp. get the ip of the rasp pi, enter ip into "host" in the settings for connecting to nis. Save that and turn off local nis.Would it be possible for one of the devs to please list the steps needed to run NIS headless? By this I mean NIS on a remote machine running 24x7 where a NCC can use it remotely periodically?
I have a RaspberryPi running NIS but it is not clear how to start and boot NIS.
Thanks
KC
open port 7890 on the rasp. - Done
get the ip of the rasp pi - Done (it is static)
enter ip into "host" in the settings for connecting to nis - Done
Save that and turn off local nis. - Done
Problem - NCC >>> NIS requires to be booted
Problem - Boot local node >>> Unknown Error
KC
Is your local node running Linux?
If so, this makes your NIS local:
ssh -l root -f rasp_ip -L 7890:localhost:7890
If not, probably you can do the same with your SSH client, whichever it is.
October 25, 2014, 02:34:39 PM
Not sure if I should post this here or in the official forum, but hey here goes!
Would it be possible for one of the devs to please list the steps needed to run NIS headless? By this I mean NIS on a remote machine running 24x7 where a NCC can use it remotely periodically?
I have a RaspberryPi running NIS but it is not clear how to start and boot NIS.
Thanks
KC
open port 7890 on the rasp. get the ip of the rasp pi, enter ip into "host" in the settings for connecting to nis. Save that and turn off local nis.Would it be possible for one of the devs to please list the steps needed to run NIS headless? By this I mean NIS on a remote machine running 24x7 where a NCC can use it remotely periodically?
I have a RaspberryPi running NIS but it is not clear how to start and boot NIS.
Thanks
KC
open port 7890 on the rasp. - Done
get the ip of the rasp pi - Done (it is static)
enter ip into "host" in the settings for connecting to nis - Done
Save that and turn off local nis. - Done
Problem - NCC >>> NIS requires to be booted
Problem - Boot local node >>> Unknown Error
KC
October 25, 2014, 02:27:43 PM
Guide to creating "real account data", saving the data and redeeming your nemstake on AE.
hope this helps those who are confused..
https://www.youtube.com/watch?v=p4-_RIDMJ0E
I think I would need to get ' wasted' after doing all that......lol....
You lost me at ' keypass'
Best thing is copy and print the private key
or save on Pen drive.Yeah...thats what I was thinking...
Yep, great video! I am sharing it.
One other tip that I would like to share. I have an old worthless digital camera. I take pictures of the screen, just in case as a back up to the back up.
Also, as Kodtycoon showed in the video, he was using a password manager. Keepass is open source and has been tested many times and proven to be one of the best and safest ways to manage information like this. I use a program that is basically the same but not controlled by a third party. But it is cross platform on my phone, mac, and windows. It's called Lastpass. It is a little friendlier on the eyes and easier to use. I like the fact too that it has two-factor authentication and I can limit what countries it can be opened in.
There are other options too, but once a person starts using these password managers, you can find it makes your life much easier and safer and there is pretty much no going back.
Another vote for LastPass. I've been using it since Sony's PlayStation Network got hacked a few years ago. Now all my passwords are in LastPass including all crypto wallets where I use a 99 character password of uppercase, lowercase, numbers and special characters. Other website passwords are generally 20 characters but same complexity. I only have to remember one pass phrase to get into LastPass although I supplement this further with 2FA which is a Yubikey from Yubicon which generates a one-time password of 100 plus letters and numbers. Not only can it store passwords which are then both complex and unique but I also use it to fill in forms like home address, work address, etc.
KC
October 25, 2014, 02:20:55 PM
Good job NEM team! I like the Beta. 
October 25, 2014, 02:20:20 PM
Not sure if I should post this here or in the official forum, but hey here goes!
Would it be possible for one of the devs to please list the steps needed to run NIS headless? By this I mean NIS on a remote machine running 24x7 where a NCC can use it remotely periodically?
I have a RaspberryPi running NIS but it is not clear how to start and boot NIS.
Thanks
KC
open port 7890 on the rasp. get the ip of the rasp pi, enter ip into "host" in the settings for connecting to nis. Save that and turn off local nis. Would it be possible for one of the devs to please list the steps needed to run NIS headless? By this I mean NIS on a remote machine running 24x7 where a NCC can use it remotely periodically?
I have a RaspberryPi running NIS but it is not clear how to start and boot NIS.
Thanks
KC
October 25, 2014, 02:16:43 PM
Not sure if I should post this here or in the official forum, but hey here goes!
Would it be possible for one of the devs to please list the steps needed to run NIS headless? By this I mean NIS on a remote machine running 24x7 where a NCC can use it remotely periodically?
I have a RaspberryPi running NIS but it is not clear how to start and boot NIS.
Thanks
KC
Would it be possible for one of the devs to please list the steps needed to run NIS headless? By this I mean NIS on a remote machine running 24x7 where a NCC can use it remotely periodically?
I have a RaspberryPi running NIS but it is not clear how to start and boot NIS.
Thanks
KC
October 25, 2014, 01:27:16 PM
Guide to creating "real account data", saving the data and redeeming your nemstake on AE.
hope this helps those who are confused..
https://www.youtube.com/watch?v=p4-_RIDMJ0E
I think I would need to get ' wasted' after doing all that......lol....
You lost me at ' keypass'
Best thing is copy and print the private key
or save on Pen drive.Yeah...thats what I was thinking...
Yep, great video! I am sharing it.
One other tip that I would like to share. I have an old worthless digital camera. I take pictures of the screen, just in case as a back up to the back up.
Also, as Kodtycoon showed in the video, he was using a password manager. Keepass is open source and has been tested many times and proven to be one of the best and safest ways to manage information like this. I use a program that is basically the same but not controlled by a third party. But it is cross platform on my phone, mac, and windows. It's called Lastpass. It is a little friendlier on the eyes and easier to use. I like the fact too that it has two-factor authentication and I can limit what countries it can be opened in.
There are other options too, but once a person starts using these password managers, you can find it makes your life much easier and safer and there is pretty much no going back.
thats a good idea actually using the camera.. especially if its one thats never really used.
its true, once you start using a password manager you wont ever go back. i wouldnt feel safe not using one now.
im thinking i might make a video of how to set up a free vps (which is actually dead easy once you know how).
October 25, 2014, 01:10:48 PM
Guide to creating "real account data", saving the data and redeeming your nemstake on AE.
hope this helps those who are confused..
https://www.youtube.com/watch?v=p4-_RIDMJ0E
I think I would need to get ' wasted' after doing all that......lol....
You lost me at ' keypass'
Best thing is copy and print the private key
or save on Pen drive.Yeah...thats what I was thinking...
Yep, great video! I am sharing it.
One other tip that I would like to share. I have an old worthless digital camera. I take pictures of the screen, just in case as a back up to the back up.
Also, as Kodtycoon showed in the video, he was using a password manager. Keepass is open source and has been tested many times and proven to be one of the best and safest ways to manage information like this. I use a program that is basically the same but not controlled by a third party. But it is cross platform on my phone, mac, and windows. It's called Lastpass. It is a little friendlier on the eyes and easier to use. I like the fact too that it has two-factor authentication and I can limit what countries it can be opened in.
There are other options too, but once a person starts using these password managers, you can find it makes your life much easier and safer and there is pretty much no going back.
October 25, 2014, 01:09:47 PM
If any one is interested in installing/using keepass mixmaster has made a brilliant guide.
https://forum.nemcoin.com/index.php?topic=2583.0
https://forum.nemcoin.com/index.php?topic=2583.0
October 25, 2014, 01:06:04 PM
Guide to creating "real account data", saving the data and redeeming your nemstake on AE.
hope this helps those who are confused..
https://www.youtube.com/watch?v=p4-_RIDMJ0E
I think I would need to get ' wasted' after doing all that......lol....
You lost me at ' keypass'
If you think that's bad you should see the process to open my nxt account lol
Got 2 DB files one with a 12 word paraphrase if memorized and that contains the 70+ char pass code to open the other database file which I have 10 seconds to open that gives me access to my nxt account paraphrase. That's near 100 chars long lol both DB's on different usb keys and both DB duplictated on 3 other usb's haha so I have 8 different usb keys in 4 different secure locations lol il die before anyone gets their hands on my coins haha
Ouch....dont worry , not everyone is a complete non-techie like me.....
In fact I should be used as an example/ guinea pig of the ' hasnt a clue' type for future developments...
October 25, 2014, 01:04:05 PM
Need help. When i click "create real account data" i can´t copy / paste the adress and public/ private key. Furthermore the last few letters of the adress are hidden, so i have to copy/ paste. (In kodtycoons video at min 2.22.)
You need to change browser....are you on firefox?.....better to change to Chrome
Thanks.
I use firefox, right. So i have to try chrome....
Yeah, a bummer.....
October 25, 2014, 01:03:33 PM
Guide to creating "real account data", saving the data and redeeming your nemstake on AE.
hope this helps those who are confused..
https://www.youtube.com/watch?v=p4-_RIDMJ0E
I think I would need to get ' wasted' after doing all that......lol....
You lost me at ' keypass'
If you think that's bad you should see the process to open my nxt account lol
Got 2 DB files one with a 12 word paraphrase if memorized and that contains the 70+ char pass code to open the other database file which I have 10 seconds to open that gives me access to my nxt account paraphrase. That's near 100 chars long lol both DB's on different usb keys and both DB duplictated on 3 other usb's haha so I have 8 different usb keys in 4 different secure locations lol il die before anyone gets their hands on my coins haha
Jump to: