Topic: [NemosMiner] multi algo profit switching NVIDIA/CPU miner - page 10. (Read 289463 times)
I this work all over nvidia and how much the profit you earn using this program hope will not wasting my time doing this .
Nemosminer has multiple miners, with the same algorithm. Some of the miners have a dev. fee. Some miners do not. Is the dev fee taken in consideration in the BTC/day calculation?
Yes the dev fee is considered. The benchmarked hashrate is reduced by the same percentage to ensure the income is comparable across all miners.
Also got the same error while benchmarking on a fresh install of 3.3.
Returning to previous version of Nemos for now.
Nemosminer has multiple miners, with the same algorithm. Some of the miners have a dev. fee. Some miners do not. Is the dev fee taken in consideration in the BTC/day calculation?
First test :
NemosMiner-v3.3
https://github.com/nemosminer/NemosMiner/releases
https://github.com/nemosminer/NemosMiner/releases/download/v3.3/NemosMiner-v3.3.zip
This is a big update which includes a lot of changes.
Start with a fresh install
Do not bring over your configuration files
Run the Benchmark (Do not copy your stats folder over)
Miner updates:
update ccminer Dumax
add cuballoon & ccminerballoon
add CryptoDredge
update zealot
add new EWBF miner for equihash 192 & 144
add PhoenixMiner 3.0c
Algo updates:
add support: Balloon (Zergpool)
add support: Equihash 192_5 ZERO_PoW (Zergpool)
add support: Equihash 144_5 sngemPoW (Zergpool)
If you have Windows 7, 8, or 8.1, please update PowerShell:
https://www.microsoft.com/en-us/download/details.aspx?id=50395
CCMiner may need 'MSVCR120.dll' if you don't already have it:
https://www.microsoft.com/en-gb/download/details.aspx?id=40784
CCMiner may need 'VCRUNTIME140.DLL' if you don't already have it:
https://www.microsoft.com/en-us/download/details.aspx?id=48145
running multiple cards its recommended to increase Virtual Memory 64gb is optimal
Requires Nvidia driver newer than 397.44 (398.11 recommended)
Made For & Tested with 8x10603gb 6x1070 6x1070ti 6x1080ti (users have reported up to 12cards working have not tested myself) Some miners do not support more that 9cards
Best Regards
Nemo
https://github.com/nemosminer/NemosMiner/releases
https://github.com/nemosminer/NemosMiner/releases/download/v3.3/NemosMiner-v3.3.zip
This is a big update which includes a lot of changes.
Start with a fresh install
Do not bring over your configuration files
Run the Benchmark (Do not copy your stats folder over)
Miner updates:
update ccminer Dumax
add cuballoon & ccminerballoon
add CryptoDredge
update zealot
add new EWBF miner for equihash 192 & 144
add PhoenixMiner 3.0c
Algo updates:
add support: Balloon (Zergpool)
add support: Equihash 192_5 ZERO_PoW (Zergpool)
add support: Equihash 144_5 sngemPoW (Zergpool)
If you have Windows 7, 8, or 8.1, please update PowerShell:
https://www.microsoft.com/en-us/download/details.aspx?id=50395
CCMiner may need 'MSVCR120.dll' if you don't already have it:
https://www.microsoft.com/en-gb/download/details.aspx?id=40784
CCMiner may need 'VCRUNTIME140.DLL' if you don't already have it:
https://www.microsoft.com/en-us/download/details.aspx?id=48145
running multiple cards its recommended to increase Virtual Memory 64gb is optimal
Requires Nvidia driver newer than 397.44 (398.11 recommended)
Made For & Tested with 8x10603gb 6x1070 6x1070ti 6x1080ti (users have reported up to 12cards working have not tested myself) Some miners do not support more that 9cards
Best Regards
Nemo
Is Nplus replacing Nemos?!
No, We help each other so code is very similar your welcome to use either the main difference atm is NPlus has Auto Update Enabled and Nemos does not...
Best Regards
Nemo
Is Nplus replacing Nemos?!
I have heard alot of Nplus, however havent tried it.
whats the main differences between Nemos and Nplus?
Next bugs :
This is one GTX 1070 GPU, Ethash no 26 GH. Good value : 26 MH
This is one GTX 1070 GPU, Ethash no 26 GH. Good value : 26 MH
Is Nplus replacing Nemos?!
I downloaded and tried 4.2.1 version.
First bugs :
First bugs :
This newer version takes a bit longer to load pool stats.
Harder to add custom miners, watching core logs says it tried to remove my custom miner (z-enemy 1.10)
Then i got this strange error...
Was a bit harder to add because the old ps1 format doesnt worked, some lines like the first one were different.
Then its better to edit the ps1 files when miner is closed otherwise it detects as an update and starts to re download the miner again...
Harder to add custom miners, watching core logs says it tried to remove my custom miner (z-enemy 1.10)
Code:
Stats X16R -> 29.90 MH after 301 sec
Remove-Item : No se puede quitar el elemento D:\Descargas\NemosMiner-master\Bin\NVIDIA-enemyz1.10\z-enemy.exe: Acceso
denegado a la ruta de acceso 'z-enemy.exe'.
En D:\Descargas\NemosMiner-master\Core.ps1: 234 Carácter: 57
+ ... h $NewMiner.Path)) {Remove-Item -Recurse (Split-Path $NewMiner.Path)}
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : PermissionDenied: (z-enemy.exe:FileInfo) [Remove-Item], UnauthorizedAccessException
+ FullyQualifiedErrorId : RemoveFileSystemItemUnAuthorizedAccess,Microsoft.PowerShell.Commands.RemoveItemCommand
Remove-Item : No se puede quitar el directorio D:\Descargas\NemosMiner-master\Bin\NVIDIA-enemyz1.10 porque no está
vacío.
En D:\Descargas\NemosMiner-master\Core.ps1: 234 Carácter: 57
+ ... h $NewMiner.Path)) {Remove-Item -Recurse (Split-Path $NewMiner.Path)}
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : WriteError: (D:\Descargas\Ne...IDIA-enemyz1.10:DirectoryInfo) [Remove-Item], IOException
+ FullyQualifiedErrorId : DirectoryNotEmpty,Microsoft.PowerShell.Commands.RemoveItemCommand
Remove-Item : No se puede quitar el elemento D:\Descargas\NemosMiner-master\Bin\NVIDIA-enemyz1.10\z-enemy.exe: Acceso
denegado a la ruta de acceso 'z-enemy.exe'.
En D:\Descargas\NemosMiner-master\Core.ps1: 234 Carácter: 57
+ ... h $NewMiner.Path)) {Remove-Item -Recurse (Split-Path $NewMiner.Path)}
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : PermissionDenied: (z-enemy.exe:FileInfo) [Remove-Item], UnauthorizedAccessException
+ FullyQualifiedErrorId : RemoveFileSystemItemUnAuthorizedAccess,Microsoft.PowerShell.Commands.RemoveItemCommand
Remove-Item : No se puede quitar el directorio D:\Descargas\NemosMiner-master\Bin\NVIDIA-enemyz1.10 porque no está
vacío.
En D:\Descargas\NemosMiner-master\Core.ps1: 234 Carácter: 57
+ ... h $NewMiner.Path)) {Remove-Item -Recurse (Split-Path $NewMiner.Path)}
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : WriteError: (D:\Descargas\Ne...IDIA-enemyz1.10:DirectoryInfo) [Remove-Item], IOException
+ FullyQualifiedErrorId : DirectoryNotEmpty,Microsoft.PowerShell.Commands.RemoveItemCommand
Then i got this strange error...
Was a bit harder to add because the old ps1 format doesnt worked, some lines like the first one were different.
Then its better to edit the ps1 files when miner is closed otherwise it detects as an update and starts to re download the miner again...
Only a few users seemed to have seen this problem.
Thanks to @thebeerbaron2018 this is has been reported by users as fixed in NPlusMiner 4.2.1
Please get the latest release from https://github.com/MrPlusGH/NPlusMiner/releases
If you are already running NPlusMiner (4.0 and above) and it will pick updates automatically.
MrPlus
Comma in password breaks bminer.exe
Currently Nemosminer is using this syntax:
Bin\NVIDIA-Bminer\bminer.exe -api 127.0.0.1:1880 -nofee -uri stratum://walletaddress.workername,[email protected]:2142 -devices 0,1
That comma is breaking bminer.exe
Not sure how it can be fixed since the full password should have a comma. "workername,c=BTC"
Omitting the workername will work in a pinch.
Bin\NVIDIA-Bminer\bminer.exe -api 127.0.0.1:1880 -nofee -uri stratum://[email protected]:2142 -devices 0,1
Currently Nemosminer is using this syntax:
Bin\NVIDIA-Bminer\bminer.exe -api 127.0.0.1:1880 -nofee -uri stratum://walletaddress.workername,[email protected]:2142 -devices 0,1
That comma is breaking bminer.exe
Not sure how it can be fixed since the full password should have a comma. "workername,c=BTC"
Omitting the workername will work in a pinch.
Bin\NVIDIA-Bminer\bminer.exe -api 127.0.0.1:1880 -nofee -uri stratum://[email protected]:2142 -devices 0,1
Equihash192 benchmarked at 1.32KH/s, and BTC/GH/Day at 6,161.78 against zergpool.
Obviously something isn't right. I posted on github as an issue and it was closed with the word "nope."
Nope is right.
https://github.com/nemosminer/NemosMiner/issues/705#issuecomment-404006133
Real professional.
Make your mathObviously something isn't right. I posted on github as an issue and it was closed with the word "nope."
Nope is right.
https://github.com/nemosminer/NemosMiner/issues/705#issuecomment-404006133
Real professional.
Calculations are correct
PS
Is there a "correct" or safe method of running 2 Nemos miners on same machine ?
No real concern here but...
Why i always get this on miner log?
Something is not right there...
Why i always get this on miner log?
Code:
Last Refresh: 07/10/2018 23:31:51
Sleeping 120
Starting Cycle
Loading BTC rate from 'api.coinbase.com'..
Loading pool stats..
Computing pool stats..
Loading miners..
Comparing miners and pools..
PS>ErrorTerminación(ForEach-Object): "No se puede llamar a un método en una expresión con valor NULL."
PS>ErrorTerminación(ForEach-Object): "No se puede llamar a un método en una expresión con valor NULL."
PS>ErrorTerminación(ForEach-Object): "No se puede llamar a un método en una expresión con valor NULL."
PS>ErrorTerminación(ForEach-Object): "No se puede llamar a un método en una expresión con valor NULL."
PS>ErrorTerminación(ForEach-Object): "No se puede llamar a un método en una expresión con valor NULL."
PS>ErrorTerminación(ForEach-Object): "No se puede llamar a un método en una expresión con valor NULL."
Idle: 3
Sleeping 120
Starting Cycle
Loading BTC rate from 'api.coinbase.com'..
Loading pool stats..
Computing pool stats..
Loading miners..
Comparing miners and pools..
PS>ErrorTerminación(ForEach-Object): "No se puede llamar a un método en una expresión con valor NULL."
PS>ErrorTerminación(ForEach-Object): "No se puede llamar a un método en una expresión con valor NULL."
PS>ErrorTerminación(ForEach-Object): "No se puede llamar a un método en una expresión con valor NULL."
PS>ErrorTerminación(ForEach-Object): "No se puede llamar a un método en una expresión con valor NULL."
PS>ErrorTerminación(ForEach-Object): "No se puede llamar a un método en una expresión con valor NULL."
PS>ErrorTerminación(ForEach-Object): "No se puede llamar a un método en una expresión con valor NULL."
Idle: 3
Something is not right there...
Equihash192 benchmarked at 1.32KH/s, and BTC/GH/Day at 6,161.78 against zergpool.
Obviously something isn't right. I posted on github as an issue and it was closed with the word "nope."
Nope is right.
https://github.com/nemosminer/NemosMiner/issues/705#issuecomment-404006133
Real professional.
Obviously something isn't right. I posted on github as an issue and it was closed with the word "nope."
Nope is right.
https://github.com/nemosminer/NemosMiner/issues/705#issuecomment-404006133
Real professional.
What happens if a miner fails multiple times during benchmark? Is it terminated and the software moves to the next one or does it try forever? What is the number of failures that is permitted?
There seems to be a memory bloat error of some sort... I have machines that have been on for 80+ days and I've had to go around and re-start NEMO as it is consuming ~10 GB of memory and stops responding. Not sure if this has been reported before and/or is a known thing.
Jump to: