Topic: [NemosMiner] multi algo profit switching NVIDIA/CPU miner - page 12. (Read 289447 times)

Hi,

thanks for the latest update!

the ccminerdumax with x16r feels exclusive but gives me headache because of the occurring memory access violations i get on the way.
i know this is my fault - i run 1070 ti`s with mild oc and i set a big page file size.
any recommendation about the itensity setting ( -i 10 got me terrible squealing noises again e.g. )

regarding the recent equihash story https://www.heise.de/newsticker/meldung/Ende-der-Grafikkarten-Aera-8000-ASIC-Miner-fuer-Zcash-Bitcoin-Gold-Co-4091821.html
you probably already know.. but if not its worth a translate an read ( hope the author is partially wrong with this )

meanwhile i hope that the "upcoming" 200k breach wont last long..

sorry for the off topic - please help me out if you have some time.


regards

And it fails to start neoscrypt, can not see any problem:
i m on 3.2.

Failed:  3

    Speed Exited   Active   Cnt  Command
    ----- ------   ------   ---  -------
0,00 PH/s dd:hh:mm 00:00:00 Once Bin\NVIDIA-CcminerKlaust\ccminer.exe -b 4068 -N 1 -R 1 -a neoscrypt -
                                 o stratum+tcp://neoscrypt.mine.blazepool.com:4233 -u 1QGADhdMRpp9Pk5u
                                 5zG1TrHKRrdK5R81TE -p NPlusMiner,c=BTC -d 0,1
0,00 PH/s dd:hh:mm 00:00:00 Once Bin\NVIDIA-CcminerKlaust\ccminer.exe -b 4068 -N 1 -R 1 -a neoscrypt -
                                 o stratum+tcp://neoscrypt.mine.blazepool.com:4233 -u xxxxxxxdeuebya
                                 Bvaxxxxxxx -p Ixxxxx,c=BTC -d 0,1
0,00 PH/s dd:hh:mm 00:00:00 15   Bin\NVIDIA-CcminerKlaust\ccminer.exe -b 4068 -N 1 -R 1 -a neoscrypt -
                                 o stratum+tcp://hub.miningpoolhub.com:17012 -u xxxxxx -p x -d 0
                                 ,1

      1BTC = 6088.8 USD
+++++   miningpoolhub Balance= 0 0%
Trust Level                      100% Avg based on [ 01 days 01:01 ]
Average BTC/H                    BTC = 0,00000000 | mBTC = 0,000
Average BTC/D                    BTC = 0,00000000 | mBTC = 0,000
Estimated Pay Date               Unknown > 0,01 BTC
+++++
   Type: NVIDIA
Miner             Algorithm       Speed mBTC/Day BTC/Day   USD/Day BTC/GH/Day Pool
-----             ---------       ----- -------- -------   ------- ---------- ----
ccminerAlexis78   Lyra2RE2  128,72 GH/s  443,462 0,44346 2.700,149    0,00345 blazepool-
EthashClaymore    Ethash     55,63 MH/s    0,306 0,00031     1,862    0,00550 miningpoolhub-Ethereum
ccminerTpruvot225 Lyra2z      3,55 MH/s    0,265 0,00027     1,615    0,07475 blazepool-
ccminerSphash     Skein     980,53 MH/s    0,223 0,00022     1,359    0,00023 blazepool-
ccminerAlexis78   Keccak      1,51 GH/s    0,220 0,00022     1,339    0,00015 blazepool-
ccminerAlexis78   Skein     947,78 MH/s    0,216 0,00022     1,314    0,00023 blazepool-
ccminerKlausT     NeoScrypt   1,95 MH/s    0,204 0,00020     1,244    0,10498 blazepool-
Running:
    Speed Started  Active   Cnt Command
    ----- -------  ------   --- -------
0,00 PH/s 00:00:04 00:00:05 2   Bin\NVIDIA-Alexis78\ccminer.exe -b 4068 -R 1 -a lyra2v2 -o stratum+tcp
                                ://lyra2v2.mine.blazepool.com:4533 -u xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
                                Bf -p ID=xxxxxxx -i 19,22 -d 0,1 -N 1

As you see above it happens at blazepool too.

Hi, i have this kind of problem too at miningpoolhub with algo lyra2v2, i m earning 2000$ with 2 1070 gpus, same for using equihash algo.

And miningpoolhub is not showing me my dayli earnings and show me 0 balance.

I have same problem. Speed must be 453.4 H/s

Bminer doesn't work at all with equihash + zpool.
Because Bminer can't start - you use aditional param ",c=BTC" in password for zpool*.ps1. Comma make error - Bminer nor supports it .
Temporary solution - to use RFC 1738 (code for comma) in zpool*.ps1
Bminer works, but zpool not shows "c=BTC" in "Extra" colum unfortunetly.

no its not...  Bminer has been well tested in v3.2 its reporting correct hashrate

Bminer is reporting hashrate wrong for profit calculations in new 3.2 version

how to correct?

only x16r has that problem for benchmarks not x16s...
if you are un happy with your x16r benchmark go into "Stats" folder delete ccminerx16r_X16R_HashRate.txt   then re run.. or you can edit ccminerx16r_X16R_HashRate.txt and change hashrate to what ever you feel is correct. 

Best Regards
Nemo

Profit predictions for x16r and x16s.

The X16R hashing algorithm consists of 16 hashing algorithms operating in the chain
fashion with the ordering dependent on the last 8 bytes (16 nibbles) of the hash of the
previous block.

I have two suggestions. At this stage, the combination of x16r and x16s is just too much to use an average over time for the 16r and x16s. the variance on profit is huge making switching unreliable.

As the last block determines the next sequence it should be theoretically possible for NEMOSMINER to monitor the miner and get an updated hashrate shortly after a change. Thus recalculate the profitability. 

The problem is if minerx16 is not running. Then NEMOSMINER will not be sure what the new profitability will be except if it runs the miner again. Which would not be beneficial given the frequency of the changes in blocks. Another method would be to benchmark each of the 16 algorithms then it should theoretically be possible for NEMOSMINER predict what the new hash rates would be for that combination of algorithms. This might have a lower error than averaging.

After today's commits, isn't ccminerCryptonight the same with ccminerTpruvotphi/ccminerTpruvot23?

  Run NemosMiner-v3.2.bat
  1. Config tab
  2. Set your Wallet address and Username
  3. Select your pool/s. (Remove any algos you do not want to mine)
  4. "Save Config"
  5. Close
  Run NemosMiner-v3.2.bat
  6."Start"
  
  note: 2. you only need to change Username if you are using Miningpoolhub

Best Regards
Nemo

NemosMiner-v3.2

Miner updates:
update ccminerx16r : https://github.com/nemosminer/ccminer-x16r/releases (forked from https://github.com/sp-hash/suprminer and optimized further)
faster x16s: https://github.com/Pigeoncoin-Miner/Pigeoncoin/releases
faster equihash: add Bminer v9.0
updated: EthashClaymore to v11.8 cuda 9.1 https://github.com/nemosminer/Claymores-Dual-Ethereum/releases
add recompiled xmrstak cuda 9.1 v2.4.5: cryptonightv7/cryptonightheavy/cryptonightlight https://github.com/nemosminer/xmr-stak/releases
updated: Alexis78 to v1.2 (add all supported algos recompile hsr,poly,keccakc) https://github.com/nemosminer/ccminerAlexis78/releases
update: Tpruvot v2.3
add: ccminerDumax
updated: Raven & Ravencoin (x16r)
faster hmq1725: https://github.com/nemosminer/ccminerx16r-x16s/releases
update ccminer KlausT neoscrypt/yescrypt/yescryptR16 : https://github.com/nemosminer/ccminerKlausT-r11-fix/releases

OptionalMiner updates:
add: cryptodredge (works for supported algos but has no API so disabled for now)
add: DelosMiner (https://github.com/nemosminer/NemosMiner/issues/649)
add: ccminercool v1.4 (lyra2z)
add: spmod (bitcore/phi/skunk/tribus)
update: enemyzealot

Algo updates:
add support: cryptonightv7/cryptonightheavy (nicehash)
add support: Allium Zerg/Zpool
add support: yescrypt/yescryptR16 (Zerg,Zpool,Blaze,Ahashpool)

Pools updates:
use the divisor now provided by the API (Ahashpool,Blazepool,Blockmasters,HashRefinery,Zergpool,Zpool)
fix MPH not displaying BTC Balance

If you have Windows 7, 8, or 8.1, please update PowerShell:
https://www.microsoft.com/en-us/download/details.aspx?id=50395

CCMiner may need 'MSVCR120.dll' if you don't already have it:
https://www.microsoft.com/en-gb/download/details.aspx?id=40784

CCMiner may need 'VCRUNTIME140.DLL' if you don't already have it:
https://www.microsoft.com/en-us/download/details.aspx?id=48145

running multiple cards its recommended to increase Virtual Memory 64gb is optimal

Requires Geforce driver newer than 397.44 (398.11 recommended)

Made For & Tested with 8x10603gb 6x1070 6x1070ti 6x1080ti (users have reported up to 12cards working have not tested myself) Some miners do not support more that 9cards

Best Regards
Nemo

you don't have to do anything update to v3.2 : uses the divisor now provided by the API (Ahashpool,Blazepool,Blockmasters,HashRefinery,Zergpool,Zpool)

Best Regards
Nemo

Go into "zergpool.ps1" and add : "skein" {$Divisor *= 1000}

If Nist5 has changed as well add it too in the same way.

wanna know how to update too

Needs some advice.

I am using zergpool with nemosminer with 66 1070's
I see that I mainly mine x16r,x16s,Neoscrypt,HSR,Lyra2r2 and Lyra2z
when I used Nicehash I almost only mined Lyra2r2 and Neoscrypt.

should I remove the other algorithms(short spikes on xevan, myr-gr, phi,skein,skunk,keccakc,allium,yescryptR16)? As they do kick in now and again but I am not so sure it is worth the interruption when switching.

Any chance to add a comment line or something to the miner's file that we can see where exactly it is coming from?

That would help to check if there are newer versions of the miners available! Otherwise it's hard to guess where ccminerx15 or spmod-etc are coming from.

Could you also update Raven Miner to version 3.1?

https://github.com/RavencoinProject/RavencoinMiner/releases

Thanks!

I'm not able to visit YouTube from the PC I'm am on at the moment, but I'm pretty sure this video is not official, and isntead is a supposed "leak"?
Maybe those spreading these rumors are people who want to buy cheap cards, probably for gaming, or they just want to troll miners who will hurry and sell their cards in low prices.

I'll trust Huang (Nvidia's CEO) more than unnamed rumors. The only thing that I can see comming on July is an announcement of the true 1180 specs and its real release date.

This happening to me too
I agree. Try bumping up your virtual memory to 64. I been running it for 24 hours now. So far so good.