[NemosMiner] multi algo profit switching NVIDIA/CPU miner - page 152.

Ventureum

member

Activity: 61

Merit: 10

Quote from: whereismyname on November 28, 2017, 08:40:35 PM

Quote from: dragonmike on November 20, 2017, 07:42:25 AM

Quote from: minerx117 on November 17, 2017, 08:32:12 PM

added: Polytimos support

How can the algo-switcher select Polytimos if there's no market value for the coin (yet)?
Or have you only added it pro-forma, and not to the profitability calculator?

poly was listed on coinsmarkets.com today, will be listed on yobit as well fee is paid.

Got listed in coinsmarkets.com so quickly? This is impressive.

jebidia

jr. member

Activity: 161

Merit: 1

Quote from: millsys on November 29, 2017, 05:43:46 PM

Quote from: sundownz on November 25, 2017, 03:34:14 PM

I am going to put all my NVidia machines on X17, Neoscrypt, Tribus, and Xevan only for a few days and see how it goes =)

Are you still mining just these 4? Its been 4-5 days, are you still convinced this is a better solution? Are you using ZPool?

Others have mentioned modifying a -m multiplier value, do you yourself do this and what values do you use for six 1070 GPUs?

Still at 180 interval?

I played a bit with the multiplier and found it not to work as well as simply assigning each algo a difficulty.
Looks like:

"xevan" = ",d=??? -d $SelGPUCC" #Xevan

replace the question marks with the difficulty you decide. I tried to shoot for a little less difficulty in this multi miner application. maybe 15-30 shares a min. Experiment with it. I found not assigning a difficulty the machine would spend over a min or more trying to dial it in.

You'll also notice that some algos take significantly longer to get to the full hash rate, I've yet to go through them, but I'm going to use that number as part of deciding which algo to mine. Would make a big difference if one is at full speed 30 seconds faster doing a 210 interval.

Currently I'm mining my 6x1080ti's at ahashpool on skein,tribus,phi. getting around .0025-.0030 a day. I'm using a 210 interval.

I check this site every few days to see pool stats: http://pools.you-stupid-woman.com/

kopija

sr. member

Activity: 308

Merit: 250

Quote from: badfad on November 29, 2017, 06:16:27 PM

So far in the 1st 24h 4x1060 + 1080ti hased for about 0.0012 Btc. Not bad, not good. I've since added another 1060, I'll try to monitor and see how that goes for a few days.

How to determine 24 hour earnings?
By subtracting "balance" or "total pending"?

badfad

jr. member

Activity: 186

Merit: 4

So far in the 1st 24h 4x1060 + 1080ti hased for about 0.0012 Btc. Not bad, not good. I've since added another 1060, I'll try to monitor and see how that goes for a few days.

millsys

member

Activity: 112

Merit: 10

Quote from: sundownz on November 25, 2017, 03:34:14 PM

I am going to put all my NVidia machines on X17, Neoscrypt, Tribus, and Xevan only for a few days and see how it goes =)

Are you still mining just these 4? Its been 4-5 days, are you still convinced this is a better solution? Are you using ZPool?

Others have mentioned modifying a -m multiplier value, do you yourself do this and what values do you use for six 1070 GPUs?

Still at 180 interval?

danspasiva

full member

Activity: 417

Merit: 105

Hey Nemo, i was wondering which algos is usin the alexis cuda9 miner with the newest version? I dont have the cuda9 in the previous version, it's worth upgrading?

whereismyname

full member

Activity: 167

Merit: 104

Quote from: dragonmike on November 20, 2017, 07:42:25 AM

Quote from: minerx117 on November 17, 2017, 08:32:12 PM

added: Polytimos support

How can the algo-switcher select Polytimos if there's no market value for the coin (yet)?
Or have you only added it pro-forma, and not to the profitability calculator?

poly was listed on coinsmarkets.com today, will be listed on yobit as well fee is paid.

sundownz

hero member

Activity: 714

Merit: 512

Quote from: minerx117 on November 27, 2017, 05:51:58 PM

Quote from: sundownz on November 27, 2017, 03:10:37 PM

Quote from: minerx117 on November 26, 2017, 06:41:36 PM

Quote from: sundownz on November 26, 2017, 04:46:48 PM

Quote from: minerx117 on November 26, 2017, 04:17:31 PM

what 117 GPUS do you have sundownz? 1070's or 1080 ti's ?

Best Regards
Nemo

Mixture of 1060, 1070, 1070Ti, 1080, and one 1080Ti (in my home office computer).

what do you find to be the most efficient ? i have 1060, 1070 and 1080ti (buying 1070ti to test this week)

i find the 1070 to be the most efficient on most algo's apart from skein where 1080ti dominates

Regards
Nemo

The 1070Ti seems to be pretty fantastic for efficiency from what I have seen. Just so hard to find them at a good price... so I have ended up with a large number of 1060s that I got for under $200 each.

i bought a 1070ti yesterday $861 nzd seems high 1070's sitting at $750nzd where the 1060 3gb i can get for $350 nzd each 1060 is best value just not the most efficient

I think the difference is bigger for you in your country.

I find 1070 Ti for 449-469 USD (I have been getting the nicer EVGA cards at 469) and the 1070 is 419 or so in USD at the moment.

So it's only 12% more expensive (7% for the cheaper models) vs. 15% more expensive for you.

minerx117

sr. member

Activity: 728

Merit: 256

NemosMiner-v3.8.1.3

Quote from: sundownz on November 27, 2017, 03:10:37 PM

Quote from: minerx117 on November 26, 2017, 06:41:36 PM

Quote from: sundownz on November 26, 2017, 04:46:48 PM

Quote from: minerx117 on November 26, 2017, 04:17:31 PM

what 117 GPUS do you have sundownz? 1070's or 1080 ti's ?

Best Regards
Nemo

Mixture of 1060, 1070, 1070Ti, 1080, and one 1080Ti (in my home office computer).

what do you find to be the most efficient ? i have 1060, 1070 and 1080ti (buying 1070ti to test this week)

i find the 1070 to be the most efficient on most algo's apart from skein where 1080ti dominates

Regards
Nemo

The 1070Ti seems to be pretty fantastic for efficiency from what I have seen. Just so hard to find them at a good price... so I have ended up with a large number of 1060s that I got for under $200 each.

i bought a 1070ti yesterday $861 nzd seems high 1070's sitting at $750nzd where the 1060 3gb i can get for $350 nzd each 1060 is best value just not the most efficient

sundownz

hero member

Activity: 714

Merit: 512

Quote from: minerx117 on November 26, 2017, 06:41:36 PM

Quote from: sundownz on November 26, 2017, 04:46:48 PM

Quote from: minerx117 on November 26, 2017, 04:17:31 PM

what 117 GPUS do you have sundownz? 1070's or 1080 ti's ?

Best Regards
Nemo

Mixture of 1060, 1070, 1070Ti, 1080, and one 1080Ti (in my home office computer).

what do you find to be the most efficient ? i have 1060, 1070 and 1080ti (buying 1070ti to test this week)

i find the 1070 to be the most efficient on most algo's apart from skein where 1080ti dominates

Regards
Nemo

The 1070Ti seems to be pretty fantastic for efficiency from what I have seen. Just so hard to find them at a good price... so I have ended up with a large number of 1060s that I got for under $200 each.

badfad

jr. member

Activity: 186

Merit: 4

Are coins with fast block times better for multi-algo mining?
Also, if you mine on only one pool(zpool,mph,hash) would it help to find blocks faster if that pool has a big % of the hashrate for that coin? This would be very good since you spend a limited amount of time on each algo.
I'm using interval 180 right now.

kopija

sr. member

Activity: 308

Merit: 250

Quote from: allpozitiv on November 25, 2017, 06:15:14 PM

Curious, what inteval (in sec) would you use in your test?

Lets take a look at the default intervals from the usual suspects and be utterly confused:

MPH-60
Sniffdog-90
Nemos-120
fork of Sniffdog by Hashrefinery- 300
Megaminer-600

Maybe one should take into consideration the total hashrate of the rig when setting the intensity?
So a person with a single 1070 in his gaming computer should set it to 600 and a person with a 6X1070 rig should set it to 120?

BTW, I am at hashrefinery ATM doing xevan, neoscrypt and skein since they seem to be best earners according to "24h actual" thingie.
I do not recommend X17 since Verge is getting too many orphaned blocks.
Some people are complaining about MobileCash (Lyra2v2) on Zpool, calling it a shitcoin.
Somebody please enlighten me because I thought that 90% of zpool coins fall into that category

badfad

jr. member

Activity: 186

Merit: 4

I'm putting 1 1080ti and 4 1060s(goddamn risers) for 2-3 days on zpool, let's see how this goes. If they earn more than 0.0015 BTC daily it's very good for the time it requires to set up.

minerx117

sr. member

Activity: 728

Merit: 256

NemosMiner-v3.8.1.3

Quote from: sundownz on November 26, 2017, 04:46:48 PM

Quote from: minerx117 on November 26, 2017, 04:17:31 PM

what 117 GPUS do you have sundownz? 1070's or 1080 ti's ?

Best Regards
Nemo

Mixture of 1060, 1070, 1070Ti, 1080, and one 1080Ti (in my home office computer).

what do you find to be the most efficient ? i have 1060, 1070 and 1080ti (buying 1070ti to test this week)

i find the 1070 to be the most efficient on most algo's apart from skein where 1080ti dominates

Regards
Nemo

sundownz

hero member

Activity: 714

Merit: 512

Quote from: sundownz on November 26, 2017, 11:07:14 AM

Quote from: sundownz on November 25, 2017, 06:36:37 PM

Quote from: allpozitiv on November 25, 2017, 06:15:14 PM

Quote from: earlmo on November 25, 2017, 04:51:28 PM

Quote from: sundownz on November 25, 2017, 03:34:14 PM

Quote from: earlmo on November 24, 2017, 09:30:42 PM

Hmmm. . . .anybody interested in some focused mining?

Zpool only pays out when it finds a block. If we reduce the number of algos we mine, that should increase the percentage of blocks found by zpool, which means more return for us.

My three favourite algos (for nvidia) at the moment are Skein, X17 and Lyre2RE2. If anyone wants to join me and focus on these (or has a better option), we could try it for a couple days and see if it makes a difference. Obviously people have differing opinions, so mine what you want.

Just a thought.

.earl

I am going to put all my NVidia machines on X17, Neoscrypt, Tribus, and Xevan only for a few days and see how it goes =)

Sounds good. I've moved mine to only those algos too. If anyone else cares to join this experiment, feel free.

.earl

Hello gents, like what are you moving to. Splendid idea to exclude the useless algos, but it should be worked out.
Curious, what inteval (in sec) would you use in your test?

Mine are all on 180-seconds.

The 13 units on m7m I have the GPUs doing ITNS (Intense Coin) & are mostly AMD cards.

But I have 36 machines on the 4 algos discussed above -- 117 GPUs.

Initial results are promising. Even with BTC going way up overnight my profit per hour (measured in BTC) is actually higher than it was before switching to 4 algos.

Of course it needs more time to really confirm =)

It is neat, though, a few times I have been ~40-50% of the total pool Xevan hash-rate, haha.

This payment block (that was 0.0015 per hour) finished up at 0.0014 per hour. I will consider the idea verified if it lasts for a few days.

sundownz

hero member

Activity: 714

Merit: 512

Quote from: minerx117 on November 26, 2017, 04:17:31 PM

what 117 GPUS do you have sundownz? 1070's or 1080 ti's ?

Best Regards
Nemo

Mixture of 1060, 1070, 1070Ti, 1080, and one 1080Ti (in my home office computer).

minerx117

sr. member

Activity: 728

Merit: 256

NemosMiner-v3.8.1.3

what 117 GPUS do you have sundownz? 1070's or 1080 ti's ?

Best Regards
Nemo

sundownz

hero member

Activity: 714

Merit: 512

Quote from: BitBustah on November 26, 2017, 04:58:31 AM

Quote from: sundownz on November 25, 2017, 03:34:14 PM

I am going to put all my NVidia machines on X17, Neoscrypt, Tribus, and Xevan only for a few days and see how it goes =)

Do skein too!

And try HashRefinery and Ahashpool. Worth it. Wink

I have not messed with multi-pool at all yet -- just multi-algo.

May need to look into it.

sundownz

hero member

Activity: 714

Merit: 512

Quote from: sundownz on November 25, 2017, 06:36:37 PM

Quote from: allpozitiv on November 25, 2017, 06:15:14 PM

Quote from: earlmo on November 25, 2017, 04:51:28 PM

Quote from: sundownz on November 25, 2017, 03:34:14 PM

Quote from: earlmo on November 24, 2017, 09:30:42 PM

Hmmm. . . .anybody interested in some focused mining?

Zpool only pays out when it finds a block. If we reduce the number of algos we mine, that should increase the percentage of blocks found by zpool, which means more return for us.

My three favourite algos (for nvidia) at the moment are Skein, X17 and Lyre2RE2. If anyone wants to join me and focus on these (or has a better option), we could try it for a couple days and see if it makes a difference. Obviously people have differing opinions, so mine what you want.

Just a thought.

.earl

I am going to put all my NVidia machines on X17, Neoscrypt, Tribus, and Xevan only for a few days and see how it goes =)

Sounds good. I've moved mine to only those algos too. If anyone else cares to join this experiment, feel free.

.earl

Hello gents, like what are you moving to. Splendid idea to exclude the useless algos, but it should be worked out.
Curious, what inteval (in sec) would you use in your test?

Mine are all on 180-seconds.

The 13 units on m7m I have the GPUs doing ITNS (Intense Coin) & are mostly AMD cards.

But I have 36 machines on the 4 algos discussed above -- 117 GPUs.

Initial results are promising. Even with BTC going way up overnight my profit per hour (measured in BTC) is actually higher than it was before switching to 4 algos.

Of course it needs more time to really confirm =)

It is neat, though, a few times I have been ~40-50% of the total pool Xevan hash-rate, haha.

BitBustah

hero member

Activity: 1218

Merit: 534

Quote from: sundownz on November 25, 2017, 03:34:14 PM

I am going to put all my NVidia machines on X17, Neoscrypt, Tribus, and Xevan only for a few days and see how it goes =)

Do skein too!

And try HashRefinery and Ahashpool. Worth it. Wink

Topic: [NemosMiner] multi algo profit switching NVIDIA/CPU miner - page 152. (Read 289447 times)