Pages:
Author

Topic: [NemosMiner] multi algo profit switching NVIDIA/CPU miner - page 26. (Read 289466 times)

newbie
Activity: 84
Merit: 0
After noticing the update to miners\x16r.ps1 a few days ago I've been wondering: Why wouldn't we have all hashrates sampled as an hour rather than a week? Wouldn't that be more "real time" accurate?

HashRates = [PSCustomObject]@{(Get-Algorithm($_)) = $Stats."$($Name)_$(Get-Algorithm($_))_HashRate".Hour}
newbie
Activity: 15
Merit: 0
Hi Gents,

I have a failed refresh of Nemos earlier for SIB.
Is this ok?



https://imgur.com/a/01xM2 s
newbie
Activity: 10
Merit: 0
Under what situations will 3.0 NOT switch even even though all the criteria are met?

100% Trust, 31 hours of runtime, config set for active gain of 8%. It has stayed on x16r even though a couple of other algos have been over the active gain point for at least 4 intervals now.

https://i.imgur.com/dHNKeGQ.png

I was experiencing the exact same problem, and I'm not using Plus.  It wouldn't switch miners for me even though some estimates were clearly above my active gain %.  I've only noticed it a couple of times, but when it did happen, I had to manually stop and start to fix it. 
newbie
Activity: 84
Merit: 0
Under what situations will 3.0 NOT switch even even though all the criteria are met?

100% Trust, 31 hours of runtime, config set for active gain of 8%. It has stayed on x16r even though a couple of other algos have been over the active gain point for at least 4 intervals now.

https://i.imgur.com/dHNKeGQ.png
newbie
Activity: 2
Merit: 0
Looking for a bit of help.  v2.5.1 runs fine but whenever I attempt to run V3.0 I get the following:

Computing pool stats..
Error contacting pool, retrying

It occurs no matter which pool I choose.

Thanks,

Make sure you have a Pools directory in your Nemosminer directory.   I think Antivirus prevented me from copying it out of the zip file
full member
Activity: 728
Merit: 169
What doesn't kill you, makes you stronger
The GPU selection in v3 is very weird. I get to pick how many cards to use but not which?
I want to run 2 instances for different cards, but what's with the "GPU Count" field? How does that work?

You can always edit the config.json file to specify which cards you want to use! ;-)

Oh so it was there! Darm is this written in the readme? I don't think it is, I didn't notice it anywhere!

Also, now that I'm running it, I see that it automatically fetches my BTC balance from the pools, but I have chosen the LTC as the payment coin. Can you please add a variable when reading info from the pools so that it gets the same coin that I've set as "Pwd Currency"? Smiley
newbie
Activity: 63
Merit: 0
The GPU selection in v3 is very weird. I get to pick how many cards to use but not which?
I want to run 2 instances for different cards, but what's with the "GPU Count" field? How does that work?

You can always edit the config.json file to specify which cards you want to use! ;-)
full member
Activity: 728
Merit: 169
What doesn't kill you, makes you stronger
The GPU selection in v3 is very weird. I get to pick how many cards to use but not which?
I want to run 2 instances for different cards, but what's with the "GPU Count" field? How does that work?
sr. member
Activity: 308
Merit: 250
Happy Easter everybody!
I was hoping that Easter bunny would bring us Linux version of Nemos.
Any ETA on that happening?
newbie
Activity: 2
Merit: 0
"Looking for a bit of help.  v2.5.1 runs fine but whenever I attempt to run V3.0 I get the following:

Computing pool stats..
Error contacting pool, retrying

It occurs no matter which pool I choose."

I'm having the same problem.   This is what I am seeing in the log
Finding available TCP Port
PS>TerminatingError(New-Object): "Exception calling ".ctor" with "2" argument(s): "No connection could be made because the target machine actively refused it 127.0.0.1:4068""
Miners API Port: 4068
Starting Brains for Plus...
Starting Earnings Tracker...
Starting Cycle
Loading BTC rate from 'api.coinbase.com'..
Loading pool stats..
Computing pool stats..
Error contacting pool, retrying..
PS>$global:?
True
full member
Activity: 322
Merit: 233
What exactly is the disable GPU0 check box suppose to do in v3.0?

I ask because i checked it in hopes of it to start up ignoring GPU0, but it made no change, i even restarted the batch file with no change with that box checked, it would start up and mine all GPU's to inclue GPU0
jr. member
Activity: 154
Merit: 1
I have been using Nemo's ONLY with MPH since the start.   Thinking about other pools.   

I am hearing about Zergpool a lot but mostly about the outages.  They have a lot of different coins though. 

Any opinions on Zergpool with NemosMiner?

They are because of upgrades.. so a good thing in the long run.  I really like Zergpool.
full member
Activity: 322
Merit: 233
I have been using Nemo's ONLY with MPH since the start.   Thinking about other pools.   

I am hearing about Zergpool a lot but mostly about the outages.  They have a lot of different coins though. 

Any opinions on Zergpool with NemosMiner?

Zergpool does have a decent share of outages, but that is why i run 2 pools, ahashpool + zergpool in plus mode, i have enough hashpower that no matter if it splits 50/50, im still getting a payout so im ok with splitting the load among pools, plus its nice being able to get payed out in LTC on zergpool and BTC on ahashpool, it gives me the ability to use one or the other for trading when value is up... lately its been more profitable getting my payouts in LTC, since btc keeps dropping on a faster rate than LTC
newbie
Activity: 12
Merit: 0
I have been using Nemo's ONLY with MPH since the start.   Thinking about other pools.   

I am hearing about Zergpool a lot but mostly about the outages.  They have a lot of different coins though. 

Any opinions on Zergpool with NemosMiner?
newbie
Activity: 18
Merit: 0
Version 3.0 of Nemo's is working great for me and my rigs.

However I was wondering if it was possible to change the payment threshold and earnings currency. I am using Zergpool's LTC payout method, but NemosMiner shows the standard BTC payout threshold and BTC/D. I would like to set the payout threshold to Zergpool's LTC threshold (0.25 LTC and 0.05 LTC on Sunday) and see my earnings reported in LTC/D instead. I tried to change the numbers in poolapiref.json, but it seems like the file is rewritten automatically.

If this is a lot of work, maybe it could be considered a feature request for a future update.  Smiley
Thank you minerx117 and MrPlus for your awesome work on this project.
newbie
Activity: 10
Merit: 0
where i can download the best miner for NVIDIA of verge x17 ¿?
newbie
Activity: 17
Merit: 0
Looking for a bit of help.  v2.5.1 runs fine but whenever I attempt to run V3.0 I get the following:

Computing pool stats..
Error contacting pool, retrying

It occurs no matter which pool I choose.

Thanks,
full member
Activity: 728
Merit: 169
What doesn't kill you, makes you stronger
@minerx117
Why would trust reset itself?
Program was up and running for about 7 hours, all 5 pools were upto 100%, then at somepoint zerg reset to 0% and is climbing back up.

Trust level would reset if Total Earned goes down more than 50%.
Did you get a payment?
Is your balance very low?

They upgraded their network today.  They said there might be interruptions.  I don't know if that could be the problem.

Yep, pretty sure that was the problem.
newbie
Activity: 63
Merit: 0
Since x16s miner was added, shouldn't this algorithm be added to PoolAlgos.json for zergpool/zergpool24hr/zergpoolplus?
jr. member
Activity: 154
Merit: 1
@minerx117
Why would trust reset itself?
Program was up and running for about 7 hours, all 5 pools were upto 100%, then at somepoint zerg reset to 0% and is climbing back up.

Trust level would reset if Total Earned goes down more than 50%.
Did you get a payment?
Is your balance very low?

They upgraded their network today.  They said there might be interruptions.  I don't know if that could be the problem.
Pages:
Jump to: