Topic: [NemosMiner] multi algo profit switching NVIDIA/CPU miner - page 23. (Read 289473 times)

1 - Enter your BTC address
2 - Hit start

That is all you need to get started.

If you need more info, you might have a look here: https://github.com/MrPlusGH/NPlusMiner-Documentation/wiki

hi, is there any video or any guide  setting up nemo miner running. i m noob about multi algo switching

@LeeMcTired

For now you could remove from the algo list.  Tribus doesn't make it to the top very often.

thanks LeeMcTired i haven't noticed that on my rigs and i have Tribus Enabled.. i will monitor closely and see if can replicate this at all...

Regards
Nemo

nothing special x16s is fully enabled in v3.1 on zergpool...:  

using:

ccminer/nevermore latest source code

minus dev fee

+ hash rate fluctuation fix

ccminerx16r-x16s

https://github.com/nemosminer/ccminerx16r-x16s/releases

Best Regards
Nemo

Hey nemo quick question, anything special to do to add x16s on the miner ?  a couple of quick edits in the miner files didnt do much.
edit:  its all good, i updated to a recent enemy miner x16s

From my usage, i found that switching is worse than focusing one single coin... I did 24hrs tests.
(4x GTX 1070 Ti Rig)

Mining on zergpool with x17,x16r only, ActiveMinerGain 10% and Interval 300 and i got 4$/day
Same settings but only x16r and i got 7-8$/day

Tribus creep, i have recently noticed the last two days that one of my rigs was mining Tribus and the other wasnt. Both are running on 3.0.
The one that was mining it, had a really high USD/day, whilst the other was mining a different algo.
As a comparison between the two rigs, the 6 x GTX1080TI had a speed of about 470 MH/s, whilst the other rig with 4 x GTX1080TI had a speed of 1.47GH/s. I deleted the miner stats in the stat folder and rebenchmark.
This dropped it down from 1.47GH/s to 308 MH/s for 4 x GPU.
Coming home from work today, i noticed it was mining Tribus again and its speed was listed as being 907MH/s, so delete folder again, rebenchmark it was 313MH/s.

I realise that the overtime the speed listed will change slightly up or down depending upon the mining hash rate, but not sure why its climbing so high for Tribus and mining on it all day, when other algo's are more profitable.

Any ideas as to why this is happening on one rig?

API? Stats? miners count? fees? any info available somewhere?

You can now mine at www.eezyhash.eu and earn Bitcoins . Multiple Algos available

yeh you will have to download master adding just the .ps1 file is not enough... Klaust-ccminercryptonight doesn't have a working API so i had to run it through a wrapper to gather hash-rate if you download master and run algos cryptonight and cryptonightV7 on nicehash they are both working now... testing on my 6x1080ti rigs as thats where XMRig was failing... XMRig would only work with upto 3 cards at a time...

Best Regards
Nemo

thought that was spam lol keep geting people sending me invites... wants me to add a app to my phone...

no thanks...

NemosMiner whatsapp group:
https://chat.whatsapp.com/A9jrZSkJ0aW0Qbl0NAIOWY

I copied over the Klaust-ccminercryptonight.ps1 and it downloaded everything fine. But when it went to bench mark it gave a Failed 1 again.  there something I'm over looking?

Nemo,

Thank you for the update appreciate it. 

Now if I can only figure out why claymore won't work.

I'm getting these errors and I've done everything I can think of to get past it, but still won't run properly. I also can't figure out how to post a screen shot here yet, but here is the errors I am getting..

ETH: 1 Pool is specified
Main Ethereum pool is us-east.ethash-hub.miningpoolhub.com:17020
DCR: 0 pool is specified
AMD OpenCL platform not found
Cuda initializing

Nvidia Cards available:2
Cuda Driver version/runtime version 9.1/8.0
GPU 0: Geforce GTX 980 TI, 6144mb available, 22 compute units, capability : 5.2 (pci bus 1:0:0)
GPU 1: Geforce GTX 980 TI, 6144mb available, 22 compute units, capability : 5.2 (pci bus 2:0:0)

Total Cards: 2

ETH: Stratum - connecting to 'us-east.ethash-hub.miningpoolhub.com' <45.56.112.78> port 17020 (unsecure)
ETH: Stratum - Connected (us-east.ethash-hub.miningpoolhub.com:17020) (unsecure)
No pool specified for Decred! Ethereum-only Mining mode is enabled
ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
ETH: nicehash stratum mode
watchdog enabled
remote management (READ-ONLY MODE) is enabled on port 4068

ETH: Authorized
setting DAG epoch #180...
setting DAG epoch #180 for GPU1
setting DAG epoch #180 for GPU0
create GPU buffer for GPU0
create GPU buffer for GPU1
ETH: 04/10/18 - 21:20:28 - New Job from us-east.ethash-hub.miningpoolhub.com:17020
ETH - Total speed: 0.000 Mh.s, total shares:0, rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 mh/s
GPU0 DAG creation time - 5980 ms
setting DAG epoch #180 for GPU0 Done
GPU1 DAG creation time - 6197 ma
setting DAG epoch #180 for GPU1 Done

GPU 0, GpuMiner cu_k1 Failed 30, unknown error
GPU 0, GpuMiner kx failed 1
NVML: cannot get current temperature, error 999 (an internal driver error occurred) <--- I have water cooled cards, not sure if this is one of the issues or not..
GPU 0 Failed
GPU 0, GpuMiner cu_k1 Failed 30, unknown error
GPU 0, GpuMiner kx failed 1
GPU 1, GpuMiner cu_k1 Failed 30, unknown error
GPU 1, GpuMiner kx failed 1
GPU 0 Failed
GPU 1 Failed
GPU 1, GpuMiner cu_k1 Failed 30, unknown error
GPU 1, GpuMiner kx failed 1
GPU 1 Failed
NVML: cannot get current temperature, error 999 (an internal driver error occurred)
NVML: cannot get current temperature, error 999 (an internal driver error occurred)
NVML: cannot get current temperature, error 999 (an internal driver error occurred)
NVML: cannot get current temperature, error 999 (an internal driver error occurred)
NVML: cannot get current temperature, error 999 (an internal driver error occurred)

I've installed the latest drivers and cuda toolset. if anyone can help me out that would awesome.

Regards,

I'll add option to minimize GUI to v3.1 before its released

Best Regards
Nemo

most pools have this sorted now i know im using zergpool atm and they took (Vergex17) offline for around 24hour couple days while they sorted out problems x17 seems to be back on profitability is good, yes

Best Regards
Nemo

whats the whatsapp group ?

it was failing because your using un released code...

it fixed now.. been working on cryptonightV7 for nicehash most of today XMRig only worked with up to 3cards then runs in to memory allocation error and shuts down.. so i switch cryptonight & cryptonightV7 over to KlausTccminer-cryptonight it works with 0-16GPUS and the speed the same if not better than XMRig and of course being from KlausT there is no dev fee so 1% over XMRig there to...

Best Regards
Nemo

Greetings,

I have been watching this thread for a while now and am part of the whatsapp group, and love the program it works for me.  Though sometimes I get the occasional error and would like to some help fixing it. 

Running:
Failed     1

Speed: 0.00PH/s
Exited: dd:hh:mm
Active: 00:00:00
Cnt:     Once
Command:  Bin\NVIDIA-ccminercryptonight\ccminer-cryptonight.exe -b 4068 -a cryptonightV7 -o [wallet address.workername] -p x -d 0,1 --api-remote


Why is this failing?

Thank you!

Sorry, just realized that one feature is not yet in Nemo.