Started using NemosMiner - really liking it, but have an issue- i get this message Application blocked from using accessing graphich cards - appears mostl on zm.exe and ccminer.
I tried adding the whole Nemosminer folder to my antivirus (avast free version) exceptions page, but still am getting these messages. Most of the timer it manages to launch a miner, but sometimes i see that the miner wasnt launched.
Anybody knows how to get rid of this issue?
This is on windows 10, latest Nemominer version, 2x gtx1070 cards
Topic: [NemosMiner] multi algo profit switching NVIDIA/CPU miner - page 91. (Read 289464 times)
link from whatsapp group miner names, to discuss ideas.
https://chat.whatsapp.com/A9jrZSkJ0aW0Qbl0NAIOWY
https://chat.whatsapp.com/A9jrZSkJ0aW0Qbl0NAIOWY
And how are you guys doin?
Wha? So much going on. First up you're comparing different pools?
And then that X17 amount… my fastest rig is 105Mh/s and it's showing 57.663USD/day on ahashpool24hr… please explain!
This was a glitch or something, lasted for 5-10 minutes at most, so i had to take a screenshot to have something to drool over and do some quality trolling. Of course it is not real. Taken on one of my rigs (6x1080ti).
edit: ss taken few weeks ago.
what configuration do you use to run zpool and ahashpool?
This probably isn't the right place for this but I'm having a hell of a time moving my 4x1070's into one rig.
I set everything up on a fresh install of windows 10 and I can get it to detect 3 cards but when I add the 4th nothing boots I just get a black screen and can't even get to the bios.
It's not the risers because I can make any combination of the three cards work and it's not the PSU's because I, again, can make any combination of the three work. It's not the PCI slots because I can make any combination of the three work as well out of the 6 slots. As soon as the 4th card is added with power to it it just won't start.
I've read that maybe my 4gb of ram isn't enough, but I've also read that you really don't need more than 4gb of ram. I'm really stuck here and hoping that one of you might have had this same issue and know a way to correct it.
I set everything up on a fresh install of windows 10 and I can get it to detect 3 cards but when I add the 4th nothing boots I just get a black screen and can't even get to the bios.
It's not the risers because I can make any combination of the three cards work and it's not the PSU's because I, again, can make any combination of the three work. It's not the PCI slots because I can make any combination of the three work as well out of the 6 slots. As soon as the 4th card is added with power to it it just won't start.
I've read that maybe my 4gb of ram isn't enough, but I've also read that you really don't need more than 4gb of ram. I'm really stuck here and hoping that one of you might have had this same issue and know a way to correct it.
Have you changed BIOS settings for mining? e.g. 'BIOS Above 4G Decoding' is enabled, PCIE speed set to 'Gen 1'
Have you installed the drivers for your specific model of mobo? Win 10 does not do exactly everything for you
Hello all,
I'm kinda a noobie at this stuff. Any idea why before the update the main Nemos CMD window would come up in addition to the miner.exe that was mining,
and since the update I'm only getting the main Nemos window with all of the stats and it says its running at 0:00 for everything for x17 algorithm, but no
miner.exe or second cmd window pops up? Any help would be appreciated!
Edit: I can see the miner open for a split second, then it immediately closes. I shut off antivirus and windows defender, hmm.
I'm kinda a noobie at this stuff. Any idea why before the update the main Nemos CMD window would come up in addition to the miner.exe that was mining,
and since the update I'm only getting the main Nemos window with all of the stats and it says its running at 0:00 for everything for x17 algorithm, but no
miner.exe or second cmd window pops up? Any help would be appreciated!
Edit: I can see the miner open for a split second, then it immediately closes. I shut off antivirus and windows defender, hmm.
Copy the command from the main window.
ex: "Bin\NVIDIA-Alexis78\ccminer-alexis.exe -a x17 -o stratum+tcp://x17.mine.ahashpool.com:3737 -u [you wallet addres]-p ID=rig1,c=BTC -i 21 -d 0,1,2,3,4,5 --api-remote"
Open a new command line and got to nemosminer folder
paste the command and hit return
You should be able to see the error returned by the miner
Hey guys, been using my 970 to mine using nemos miner no problems. Recently picked up a gtx 1080 and the display driver crashes whenever Nemos switches to a different algorithm. Any solutions to this? Crashes regardless of overclock, underclock, or stock settings.
Try uninstalling any OC apps, doing a DDU then installing the latest nvidia drivers
Thanks for the advice, tried exactly that. Got rid of GPU Tweak, used DDU, reinstalled latest Nvidia and still crashing on algorithm switch. Seems like it's only doing it when I'm using OC software though, either GPU Tweak or MSI Afterburner. I'd be fine not using either while mining, but I like to limit my TDP of my card while mining and I can't do that without OC software as far as I know.
Are you the latest version e.g. Afterburner 4.4.2?
It's not as convenient as AB but you could use nvidia-smi to set TDP from the commandline: http://cryptomining-blog.com/7410-monitor-and-control-your-nvidia-gpus-while-mining/ If it works you can make a bat file to run the settings.
This probably isn't the right place for this but I'm having a hell of a time moving my 4x1070's into one rig.
I set everything up on a fresh install of windows 10 and I can get it to detect 3 cards but when I add the 4th nothing boots I just get a black screen and can't even get to the bios.
It's not the risers because I can make any combination of the three cards work and it's not the PSU's because I, again, can make any combination of the three work. It's not the PCI slots because I can make any combination of the three work as well out of the 6 slots. As soon as the 4th card is added with power to it it just won't start.
I've read that maybe my 4gb of ram isn't enough, but I've also read that you really don't need more than 4gb of ram. I'm really stuck here and hoping that one of you might have had this same issue and know a way to correct it.
I set everything up on a fresh install of windows 10 and I can get it to detect 3 cards but when I add the 4th nothing boots I just get a black screen and can't even get to the bios.
It's not the risers because I can make any combination of the three cards work and it's not the PSU's because I, again, can make any combination of the three work. It's not the PCI slots because I can make any combination of the three work as well out of the 6 slots. As soon as the 4th card is added with power to it it just won't start.
I've read that maybe my 4gb of ram isn't enough, but I've also read that you really don't need more than 4gb of ram. I'm really stuck here and hoping that one of you might have had this same issue and know a way to correct it.
Have you changed BIOS settings for mining? e.g. 'BIOS Above 4G Decoding' is enabled, PCIE speed set to 'Gen 1'
Jumpin Jesus!
After the first miner starts it stays here and nothing happens. Any idea why? https://ibb.co/gJFXPG
edit: I tried to embed this a million times and can't figure it out, I understand if you don't wanna look. It's to an image hosting site with the pic called ImgBB
What cards do you have? If you have older than 10 series a number of algos won’t work. So you need to disable them, or for some lower the intensity in the respective miner .ps1 files edit: I tried to embed this a million times and can't figure it out, I understand if you don't wanna look. It's to an image hosting site with the pic called ImgBB
Hi, I am unable to benchmark on 2.4 and 2.4.1 it only says Sleep 240 sec and after 240 secs. it starts over and over. Miner is running all the time correctly.
Above that it does not show all algos specified in config (running on nicehash).
Thanks
Above that it does not show all algos specified in config (running on nicehash).
Thanks
Code:
Type: NVIDIA
Miner Algorithm Speed mBTC/Day BTC/Day USD/Day BTC/GH/Day Pool
----- --------- ----- -------- ------- ------- ---------- ----
ccminerpolytimos Lyra2RE2 Benchmarking Benchmarking Benchmarking Benchmarking 0,00909 nicehash-
ccminerpolytimos Nist5 Benchmarking Benchmarking Benchmarking Benchmarking 0,00457 nicehash-
ccminerpolytimos Keccak Benchmarking Benchmarking Benchmarking Benchmarking 0,00038 nicehash-
ccminerpolytimos Lbry Benchmarking Benchmarking Benchmarking Benchmarking 0,00014 nicehash-
Running:
Speed Started Active Cnt Command
----- ------- ------ --- -------
0,00 PH/s 00:00:00 00:00:00 Once Bin\NVIDIA-ccminerpolytimos\ccminer.exe -a lyra2v2 -o stratum+tcp://lyra2rev2.eu.nicehash.com:3347 -u 38YuKbJVpq5oJ4fVPQ9sHmMJqLH9PMDY38.NemosMinerv2.4 -p x -d 0,1,2,3,4,5,6,7
--------------------------------------------------------------------------------
Last Refresh: 01/21/2018 10:26:16
Sleep 240 sec
--------------------------------------------------------------------------------
Running:
Speed Started Active Cnt Command
----- ------- ------ --- -------
0,00 PH/s 00:00:04 00:00:04 Once Bin\NVIDIA-ccminerpolytimos\ccminer.exe -a lyra2v2 -o stratum+tcp://lyra2rev2.eu.nicehash.com:3347 -u 38YuKbJVpq5oJ4fVPQ9sHmMJqLH9PMDY38.NemosMinerv2.4 -p x -d 0,1,2,3,4,5,6,7
--------------------------------------------------------------------------------
Last Refresh: 01/21/2018 10:30:16
Sleep 240 sec
This probably isn't the right place for this but I'm having a hell of a time moving my 4x1070's into one rig.
I set everything up on a fresh install of windows 10 and I can get it to detect 3 cards but when I add the 4th nothing boots I just get a black screen and can't even get to the bios.
It's not the risers because I can make any combination of the three cards work and it's not the PSU's because I, again, can make any combination of the three work. It's not the PCI slots because I can make any combination of the three work as well out of the 6 slots. As soon as the 4th card is added with power to it it just won't start.
I've read that maybe my 4gb of ram isn't enough, but I've also read that you really don't need more than 4gb of ram. I'm really stuck here and hoping that one of you might have had this same issue and know a way to correct it.
I set everything up on a fresh install of windows 10 and I can get it to detect 3 cards but when I add the 4th nothing boots I just get a black screen and can't even get to the bios.
It's not the risers because I can make any combination of the three cards work and it's not the PSU's because I, again, can make any combination of the three work. It's not the PCI slots because I can make any combination of the three work as well out of the 6 slots. As soon as the 4th card is added with power to it it just won't start.
I've read that maybe my 4gb of ram isn't enough, but I've also read that you really don't need more than 4gb of ram. I'm really stuck here and hoping that one of you might have had this same issue and know a way to correct it.
2.3.1 or 2.4 will be focused on
no change to the "algorithm calculation of profit"...
A few weeks tested "Ahash", if use the values of 24hr, the final result is almost 2 times lower than the estimated values, with the same "Hashrefinery", the difference is much less. Nemo, please, think how to fix it, especially when the pool gives overestimated values. Or in the algorithm add the possibility of making an adjustment of the values, where could cut half of the garbage. At certain moments, even NiceHash is paying 2 times more than all of these pools, but I did not earn these coins. no change to the "algorithm calculation of profit"...
I dont know, but do you have disabled firewall? And latest nvidia drivers?
Hey guys, been using my 970 to mine using nemos miner no problems. Recently picked up a gtx 1080 and the display driver crashes whenever Nemos switches to a different algorithm. Any solutions to this? Crashes regardless of overclock, underclock, or stock settings.
Try uninstalling any OC apps, doing a DDU then installing the latest nvidia drivers
Thanks for the advice, tried exactly that. Got rid of GPU Tweak, used DDU, reinstalled latest Nvidia and still crashing on algorithm switch. Seems like it's only doing it when I'm using OC software though, either GPU Tweak or MSI Afterburner. I'd be fine not using either while mining, but I like to limit my TDP of my card while mining and I can't do that without OC software as far as I know.
And how are you guys doin?
Wha? So much going on. First up you're comparing different pools?
And then that X17 amount… my fastest rig is 105Mh/s and it's showing 57.663USD/day on ahashpool24hr… please explain!
Holy hell mind uploading a picture of that hardware setup? You have a whole server room?
And how are you guys doin?
Anyone else mine with a Titan V? Just wondering why my core clock is so much mower mining versus gaming. It's in power state P2, so something else is keeping the core clock low. ~1515 MHz mining, ~1930 MHz gaming.
How do I autorun this program?
Whenever I add it to startup, it just stop working....
Whenever I add it to startup, it just stop working....
add to TASK SCHEDULER as a basic task that starts 15 seconds after anyone logs on
Use AutoLogon if you have a pw set (sysinternals)
Jump to: