Quote
BITMAIN ANTMINER S9 Batch 1 with 9.63th/s
Shipping from 26th May 2016
S9 Specifications:
1. Hash Rate: 9.63 TH/s ±5%
2. Power Consumption: 1350W + 10% (at the wall, with APW3, 93% efficiency, 25C ambient temp)
3. Power Efficiency: 0.15 J/GH + 10% (at the wall, with APW3, 93% efficiency, 25°C ambient temp)
4. Rated Voltage: 11.60 ~13.00V
5. Chip quantity per unit: 114x BM1396
6. Dimensions: 301mm(L)*123mm(W)*155mm(H)
7. Cooling: 1x 12038 fan
8. Operating Temperature: 0 °C to 40 °C
9. Network Connection: Ethernet
10. Default Frequency: 800M
Notes:
1. Power consumption figures will vary with your PSU’s efficiency, the ambient operating temperature and the accuracy of the power meter.
2. PSU: A power supply unit is not included, and you will need to provide an ATX PSU. There are 3 PCI-e connectors for +12V DC input on each hashing board and all 3 are required. Do not connect more than one PSU to the same hashing board!
Bitmain recommends the APW3-12-1600-B2 power supply for use with the S9. One power supply support one S9.
3. Separate power supply to control board: there is one additional 6pin PCI-e connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner after ALL the 10 PCIE connectors connected to power supply. When using differnt PSU and you want to power off the miner, be sure to disconnect all the PSU from power.
Shipping from 26th May 2016
S9 Specifications:
1. Hash Rate: 9.63 TH/s ±5%
2. Power Consumption: 1350W + 10% (at the wall, with APW3, 93% efficiency, 25C ambient temp)
3. Power Efficiency: 0.15 J/GH + 10% (at the wall, with APW3, 93% efficiency, 25°C ambient temp)
4. Rated Voltage: 11.60 ~13.00V
5. Chip quantity per unit: 114x BM1396
6. Dimensions: 301mm(L)*123mm(W)*155mm(H)
7. Cooling: 1x 12038 fan
8. Operating Temperature: 0 °C to 40 °C
9. Network Connection: Ethernet
10. Default Frequency: 800M
Notes:
1. Power consumption figures will vary with your PSU’s efficiency, the ambient operating temperature and the accuracy of the power meter.
2. PSU: A power supply unit is not included, and you will need to provide an ATX PSU. There are 3 PCI-e connectors for +12V DC input on each hashing board and all 3 are required. Do not connect more than one PSU to the same hashing board!
Bitmain recommends the APW3-12-1600-B2 power supply for use with the S9. One power supply support one S9.
3. Separate power supply to control board: there is one additional 6pin PCI-e connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner after ALL the 10 PCIE connectors connected to power supply. When using differnt PSU and you want to power off the miner, be sure to disconnect all the PSU from power.
Preis soll 4,8 BTC sein, hier der OpenBazaar-Link:
ob://17144de3790b134b05a0fca102ff8b8887d08e27/listing/c6bbb66fd2041bde823ad70df9bdb757600aafee
Update:
Könnte auch ein Fake sein, sollte man einen kaufen, auf jeden Fall Escrow benutzen!
wäre interessant ob die Miner als Gebraucht oder Neuware verkauft werden? 
