[NEW] Bitmain Announces Antminer A3 - page 37.

oliver1975

newbie

Activity: 62

Merit: 0

Quote from: Tssar on January 25, 2018, 07:24:09 AM

Quote from: oliver1975 on January 25, 2018, 07:22:58 AM

how i must fill "Worker in miner configuration please ?

I just put my siacoin wallet adress without "dot workername" that's ok ?

https://www.noelshack.com/2018-04-4-1516879353-a3.png

you have to put the dot it should be wallet.worker

ok thanks a lot.

i modified the parameter in putting .Olivier

that's seems ok, i see it in siamining.

Tssar

member

Activity: 120

Merit: 10

Quote from: oliver1975 on January 25, 2018, 07:22:58 AM

how i must fill "Worker in miner configuration please ?

I just put my siacoin wallet adress without "dot workername" that's ok ?

you have to put the dot it should be wallet.worker

oliver1975

newbie

Activity: 62

Merit: 0

how i must fill "Worker in miner configuration please ?

I just put my siacoin wallet adress without "dot workername" that's ok ?

https://www.noelshack.com/2018-04-4-1516879353-a3.png

Tssar

member

Activity: 120

Merit: 10

Quote from: SkyLakeMine on January 25, 2018, 06:34:48 AM

Quote from: Tssar on January 25, 2018, 06:15:35 AM

can you help me with your A3 Archive? I have 2 dis-functioning hashboards

What are the instructions for creating an archive?
I could do it if I had instructions.

on your A3 dashboard, you go to system after that upgrade and than you will find generate archive!

That would be great if you can help.

SkyLakeMine

member

Activity: 99

Merit: 11

Quote from: Tssar on January 25, 2018, 06:15:35 AM

can you help me with your A3 Archive? I have 2 dis-functioning hashboards

What are the instructions for creating an archive?
I could do it if I had instructions.

Tssar

member

Activity: 120

Merit: 10

Quote from: mousehouse on January 25, 2018, 06:29:04 AM

Quote from: Tssar on January 25, 2018, 06:25:49 AM

Quote from: mousehouse on January 25, 2018, 06:22:47 AM

Quote from: hellscreamer on January 25, 2018, 06:08:28 AM

Switch pools , Sia Devs are at war with Bitmain , just like Dash

I'm on siamining... what other pool do you recommend?

hi,

would it be possible if you can help me with your A3 archive please...

thanks

sorry I do not have that and am away from my A3 to create one for you. There's a few usernames earlier in the thread that helped out, maybe PM them for best results...

thanks mousehouse....already done....waiting for their feedback since yesterday

mousehouse

full member

Activity: 150

Merit: 100

Quote from: Tssar on January 25, 2018, 06:25:49 AM

Quote from: mousehouse on January 25, 2018, 06:22:47 AM

Quote from: hellscreamer on January 25, 2018, 06:08:28 AM

Switch pools , Sia Devs are at war with Bitmain , just like Dash

I'm on siamining... what other pool do you recommend?

hi,

would it be possible if you can help me with your A3 archive please...

thanks

sorry I do not have that and am away from my A3 to create one for you. There's a few usernames earlier in the thread that helped out, maybe PM them for best results...

Tssar

member

Activity: 120

Merit: 10

Quote from: mousehouse on January 25, 2018, 06:22:47 AM

Quote from: hellscreamer on January 25, 2018, 06:08:28 AM

Switch pools , Sia Devs are at war with Bitmain , just like Dash

I'm on siamining... what other pool do you recommend?

hi,

would it be possible if you can help me with your A3 archive please...

thanks

mousehouse

full member

Activity: 150

Merit: 100

Quote from: hellscreamer on January 25, 2018, 06:08:28 AM

Switch pools , Sia Devs are at war with Bitmain , just like Dash

I'm on siamining... what other pool do you recommend?

Tssar

member

Activity: 120

Merit: 10

Quote from: mousehouse on January 25, 2018, 05:48:31 AM

Anybody else experience a collapse in mining speed / ASICs going offline this morning around 00.30 EDT? Looked the same as the dip the day before and I can see it in the global hash rate graph on siamining as well (smallish compared to earlier).

After a reboot all was fine again. Maybe my A3 crapping out or ... ?

can you help me with your A3 Archive? I have 2 dis-functioning hashboards

hellscreamer

jr. member

Activity: 47

Merit: 2

Switch pools , Sia Devs are at war with Bitmain , just like Dash

mousehouse

full member

Activity: 150

Merit: 100

Anybody else experience a collapse in mining speed / ASICs going offline this morning around 00.30 EDT? Looked the same as the dip the day before and I can see it in the global hash rate graph on siamining as well (smallish compared to earlier).

After a reboot all was fine again. Maybe my A3 crapping out or ... ?

eth_mining

newbie

Activity: 95

Merit: 0

Quote from: AerialGopher on January 25, 2018, 03:09:25 AM

Quote from: Darknicks on January 25, 2018, 12:26:46 AM

Quote from: redalert11 on January 24, 2018, 12:37:04 AM

I'm using 3 power supplies to power a A3 using 120v power. The miner takes almost 1500 watts using a watt meter.

What? No. I'm using 1 APW3++ using 120v. No issue at all. Consuming ~1,200 Watts

I have a meter on mine too on 120 V, and its 1400 Watts at the wall!

I have also had 5 s9 antminers drawing 1525 watts on 120 volt the same way for over a month.. on the same PSU's APW3++

I read its not safe to do that. APW3 can only provide 1200 W at 110-120 V safely. No?

AerialGopher

jr. member

Activity: 196

Merit: 4

Quote from: Darknicks on January 25, 2018, 12:26:46 AM

Quote from: redalert11 on January 24, 2018, 12:37:04 AM

I'm using 3 power supplies to power a A3 using 120v power. The miner takes almost 1500 watts using a watt meter.

What? No. I'm using 1 APW3++ using 120v. No issue at all. Consuming ~1,200 Watts

I have a meter on mine too on 120 V, and its 1400 Watts at the wall!

I have also had 5 s9 antminers drawing 1525 watts on 120 volt the same way for over a month.. on the same PSU's APW3++

abdullaziz.said

newbie

Activity: 16

Merit: 0

Quote from: Boneyg001 on January 23, 2018, 08:10:17 PM

Quote from: abdullaziz.said on January 23, 2018, 12:29:28 PM

Quote from: premanand1984 on January 23, 2018, 11:59:40 AM

Quote from: Chan8 on January 23, 2018, 11:29:59 AM

Quote from: BenRickert on January 23, 2018, 09:22:06 AM

Quote from: dt8666 on January 23, 2018, 08:50:24 AM

Quote from: eth_mining on January 23, 2018, 06:44:32 AM

Quote from: BenRickert on January 22, 2018, 04:40:13 PM

Quote from: eth_mining on January 22, 2018, 04:31:54 PM

To those that have started to mine.

How much watts is it pulling? Any chance we could just run the APW3++ run on US 110 V?

APW3++ only 1200 watts on 110v. Even if bitmain overstated the draw, which they usually do....you would be cutting it awfully close.

Can someone post the power consumption details about A3 please? Really curious about a possibility to run Antminer A3 on 110V using APW3++....

Tested with 240V. Power is 1450W on wall

On stock clock

Holeeee shit. Seems like they overclocked the shit out of these things. Just like the D3. What Frequency do they run at to get the 815mh??

Frequency running at 600.. temp is good, very stable miner..

What pool are you on ? How much is the miner earning per hour. Could you please share the configuration page, graying out confidential information. Thanks.

my pool is siamining.com
this is my configuration
https://i.imgur.com/TUL7OeM.png
https://i.imgur.com/rwHvTMm.png

Hey dt, what power supply unit are you using and are you on 220 or 120 volt?

i'm using this one https://shop.bitmain.com/productDetail.htm?pid=00020171107201722598O4kMWe280658
and i'm on 220V

Moon2eth

newbie

Activity: 31

Merit: 0

Bitmain specs say 1186 +/-7% fluctuation at 12v DC. Simply do that and add your psu's efficiency. 7% for titanium, 9% for platinum, 11% for gold and so on.

So the max it should draw is 1386w if you have a platinum psu. Psus also operate slightly more efficiently at 240v than 120v by 2%ish.

If the operating temperature is really hot I could imagine it going up to 1500w. 1350w is a more realistic day to day scenario.

eth_mining

newbie

Activity: 95

Merit: 0

Quote from: MiningDoc on January 25, 2018, 01:42:31 AM

Quote from: proteus7 on January 25, 2018, 01:18:56 AM

Its reading 5.9A at 240v at the wall, so 1416w with an APW3++ power supply. Its also mining a little faster than usual at 835GH, so that may be why its high.
At 120v, it would be pulling 12A..so better have a dedicated circuit for it!

Quote from: eth_mining on January 25, 2018, 01:08:17 AM

Quote from: Darknicks on January 25, 2018, 12:26:46 AM

Quote from: redalert11 on January 24, 2018, 12:37:04 AM

I'm using 3 power supplies to power a A3 using 120v power. The miner takes almost 1500 watts using a watt meter.

What? No. I'm using 1 APW3++ using 120v. No issue at all. Consuming ~1,200 Watts

Quote from: Boneyg001 on January 25, 2018, 12:51:06 AM

Quote from: Darknicks on January 25, 2018, 12:26:46 AM

Quote from: redalert11 on January 24, 2018, 12:37:04 AM

I'm using 3 power supplies to power a A3 using 120v power. The miner takes almost 1500 watts using a watt meter.

What? No. I'm using 1 APW3++ using 120v. No issue at all. Consuming ~1,200 Watts

well wtf I must have just wasted a ton of money buying a second PSU because I thought my miner would have many hardware errors and screw up from being on 120v Embarrassed

Someone posted it is taking as much as 1500 W. What is the real truth?

I am in the same problem too. 120v and planning to use 2 power supplies.

Guess you could always underclock it to a lower frequency on a 120v to reduce wattage draw, and run it off a 20 amp circuit

Never had a bitmain asic before. Is it simple? Do you have an A3? Can you share what exactly to change bring this to 1200 W? Will that void the warranty or any other potential damage to the device? I understand that it will bring the hashrate down. But will avoid many issues for me.

Tssar

member

Activity: 120

Merit: 10

Quote from: Darknicks on January 25, 2018, 12:31:43 AM

Quote from: nwo69 on January 24, 2018, 10:24:26 AM

My antminer A3 arrived one hashboard dead .
1st time I plugged in,One blade is dead.
PLEASE see the picture.
http://fantom.tokyo/A3config.PNG
then
http://fantom.tokyo/A3ASICDEAD.PNG
and
http://fantom.tokyo/A31DEAD.PNG

so I switched 18pin cable connection 1and2 and still board1 is dead(this time board1 is chain2)
http://fantom.tokyo/A3changeconnect.PNG

So please give me advise:-(

I think you just were mining during the soft fork test. Try rebooting your miner. It should be fixed by now

I am having the same issue with 2 boards. The reset and the reboot didn't help.
The only solution left is to flash it and we need the help of the A3 community as on Bitmain website they don't have it available....
I have asked for support waiting for a miracle to happen :-)

MiningDoc

member

Activity: 98

Merit: 12

Quote from: proteus7 on January 25, 2018, 01:18:56 AM

Its reading 5.9A at 240v at the wall, so 1416w with an APW3++ power supply. Its also mining a little faster than usual at 835GH, so that may be why its high.
At 120v, it would be pulling 12A..so better have a dedicated circuit for it!

Quote from: eth_mining on January 25, 2018, 01:08:17 AM

Quote from: Darknicks on January 25, 2018, 12:26:46 AM

Quote from: redalert11 on January 24, 2018, 12:37:04 AM

I'm using 3 power supplies to power a A3 using 120v power. The miner takes almost 1500 watts using a watt meter.

What? No. I'm using 1 APW3++ using 120v. No issue at all. Consuming ~1,200 Watts

Quote from: Boneyg001 on January 25, 2018, 12:51:06 AM

Quote from: Darknicks on January 25, 2018, 12:26:46 AM

Quote from: redalert11 on January 24, 2018, 12:37:04 AM

I'm using 3 power supplies to power a A3 using 120v power. The miner takes almost 1500 watts using a watt meter.

What? No. I'm using 1 APW3++ using 120v. No issue at all. Consuming ~1,200 Watts

well wtf I must have just wasted a ton of money buying a second PSU because I thought my miner would have many hardware errors and screw up from being on 120v Embarrassed

Someone posted it is taking as much as 1500 W. What is the real truth?

I am in the same problem too. 120v and planning to use 2 power supplies.

Guess you could always underclock it to a lower frequency on a 120v to reduce wattage draw, and run it off a 20 amp circuit

MiningDoc

member

Activity: 98

Merit: 12

Quote from: Caretaker007 on January 25, 2018, 12:54:48 AM

Quote from: proteus7 on January 24, 2018, 10:55:34 PM

Quote from: cashen on January 24, 2018, 10:25:13 PM

Quote from: AerialGopher on January 24, 2018, 07:08:27 PM

Quote from: JohnnyArmani on January 24, 2018, 06:53:57 PM

Quote from: omshree on January 24, 2018, 06:36:00 PM

Hi, could anybody enlighten me if there is a working nicehash blake2b pool? It's not on the stratum list, tough in WTM its listed.

On NiceHash the blake2b is listed as Sia, since its the only coin minable with blake2b. But i havent been able to get NiceHash to work for me....

I cant get it to work. I got Mining pool hub to work for a bit, then it stops, ie like 1 minute...

Funny how there is so little places to use this paper weight.. :-)

Still can't get it working.... ugh.

siamining is the only one working for me.

Same here. Siamining is the only one working. Not good, since they have over 51% hashrate. They also have a high 3% fee... Luxor, miningpoolhub, nicehash, etc all need to step up their game.

Luxor is working for me now. They bumped up the starting difficulty (8k for me on the us-east server) which seems to resolve the issues but its settling at ~800. MiningPoolHub is still starting at a difficulty of 1 and the miner gets crazy with the HW errors and restarts.

Hmm anyway to setup a solo mining situation? that way you can control your own diff.

Topic: [NEW] Bitmain Announces Antminer A3 - page 37. (Read 22419 times)