Hi guy's could anyone show me what I'm doing wrong? I'm running a 6950 on windows 7. I made a bat file as below and get nothing but rejects
sgminer --pool-algorithm bitblockold -I 16 -o stratum+tcp://east1.us.stratum.dedicatedpool.com:6002 -u -p --thread-concurrency 4032
Topic: New sgminer support x11, x13, x14 and x15, fresh (with source) - page 4. (Read 34201 times)
|iPhone
I need a Windows version。I will not compile。
I need a Windows version。I will not compile。
sgminer freezes on quit for me on Windows 7 with 280x cards. Once it is frozen, I can't even kill the process, I have to do a hard reset.
I'm still on Catalyst 14.1, should I update it?
Using the binary from the rar linked in OP
I'm still on Catalyst 14.1, should I update it?
Using the binary from the rar linked in OP
I will second this and I already have the 14.6 beta drivers.
I'm having major issues with version 29 - 280X cards produce HW errors (X15) - up to 10 per hour and eventually freeze up the rig (black screen of death lol)
290x cards on the other hand are having no problems.
290x cards on the other hand are having no problems.
sgminer freezes on quit for me on Windows 7 with 280x cards. Once it is frozen, I can't even kill the process, I have to do a hard reset.
I'm still on Catalyst 14.1, should I update it?
Using the binary from the rar linked in OP
I'm still on Catalyst 14.1, should I update it?
Using the binary from the rar linked in OP
Thanks very much I'll give it a try 
I'm using a config file for my 6970, u can try my setting
I'm getting 1450kh/s x15
Code:
"profiles" : [
{
"name" : "x11",
"algorithm" : "darkcoin-mod",
"intensity" : "18",
"hamsi-expand-big" : "4",
"gpu-threads" : "2",
"gpu-powertune" : "8",
"gpu-fan" : "60-65",
"worksize": "64"
},
{
"name" : "x13",
"algorithm" : "marucoin-modold",
"intensity" : "18",
"gpu-threads" : "2",
"gpu-powertune" : "8",
"gpu-fan" : "60-65",
"worksize": "64"
},
{
"name" : "x15",
"algorithm" : "bitblockold",
"intensity" : "18",
"gpu-threads" : "2",
"gpu-powertune" : "8",
"gpu-fan" : "60-65",
"worksize": "64"
},
{
"name" : "scrypt",
"intensity" : "18",
"gpu-powertune" : "8",
"worksize" : "256",
"lookup-gap" : "0",
"gpu-threads": "1",
"gpu-fan" : "55-65",
"algorithm" : "alexkarnew",
"nfactor" : "10"
},
{
"name" : "nscrypt",
"intensity" : "13",
"gpu-powertune" : "10",
"worksize" : "256",
"lookup-gap" : "0",
"gpu-threads": "2",
"gpu-fan" : "55-65",
"algorithm" : "alexkarnew",
"nfactor" : "11"
},
{
"name" : "keccak",
"intensity" : "14",
"gpu-powertune" : "10",
"worksize" : "256",
"lookup-gap" : "2",
"gpu-threads": "2",
"algorithm" : "maxcoin"
}
],
"default-profile": "x15",
"hamsi-expand-big" : "4",
"failover-only" : true,
"shaders" : "1536",
"thread-concurrency" : "8000",
"temp-cutoff" : "96",
"temp-overheat" : "94",
"temp-target" : "88",
"api-allow" : "W:127.0.0.1",
"api-listen" : true,
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "1",
"gpu-dyninterval" : "7",
"hotplug" : "5",
"log" : "5",
"queue" : "0",
"scan-time" : "1",
"temp-hysteresis" : "2",
"shares" : "0",
"no-submit-stale" : true,
"no-restart" : true,
"failover-switch-delay" : "30",
"show-coindiff" : true,
"remove-disabled" : true,
"extranonce-subscription" : true
}
Has anyone got a Radeon 69 series to run using this software? Trying to get a 6990 to work but just get hardware errors.
If not can anyone recommend any x15 software that will work?
If not can anyone recommend any x15 software that will work?
Did u use bitblockold?
Thanks, yes I did still no luck. Here's my .bat file perhaps I've got it wrong:
COLOR 0A
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
sgminer.exe -o stratum+tcp://east1.us.stratum.dedicatedpool.com:6002 --pool-algorithm bitblockold --name BBL -u *** -p *** --gpu-platform 0 -I 12 -g 1 -w 256
Has anyone got a Radeon 69 series to run using this software? Trying to get a 6990 to work but just get hardware errors.
If not can anyone recommend any x15 software that will work?
If not can anyone recommend any x15 software that will work?
Did u use bitblockold?
Has anyone got a Radeon 69 series to run using this software? Trying to get a 6990 to work but just get hardware errors.
If not can anyone recommend any x15 software that will work?
If not can anyone recommend any x15 software that will work?
Suggestion:
Just create a config to list ordered algorithm names instead of X11, X13, X15, etc. For example algorithms="keccak,bmw, groetsl".
Lets call it XN algorithm
Just create a config to list ordered algorithm names instead of X11, X13, X15, etc. For example algorithms="keccak,bmw, groetsl".
Lets call it XN algorithm
Has anyone gotten -d switch to work? If I put -d 0,1,2,3,4 only one card works, if I take the -d completely out it works ok but after reboot I get:
https://dl.dropboxusercontent.com/u/1471771/Forums/OCuk/X15%20Error.PNG
Weird.
https://dl.dropboxusercontent.com/u/1471771/Forums/OCuk/X15%20Error.PNG
Weird.
start using task scheduler sir ?
some how it doesn't gives correct working folder i guess
Yes it was task scheduler, let me look into the task and my command line - cheers for the pointer.
4 - Open
sgminer.sln not present in the download link
upload, please again
I still hope someone will explain how to run latest sgminer with different cards in the system
Like one using x13mod and one using x13modold
The problem is that when setting x13mod, miner tries to compile x13mod for the older card... and fails and quits...
Using -d doesn't help. Binaries, obviously, I can't use - naming bin file doesn't work, maybe sgminer is checking not only the name but the actual content :/
Like one using x13mod and one using x13modold
The problem is that when setting x13mod, miner tries to compile x13mod for the older card... and fails and quits...
Using -d doesn't help. Binaries, obviously, I can't use - naming bin file doesn't work, maybe sgminer is checking not only the name but the actual content :/
When I was using older and newer cards I used 2 seperate sgminer to run it, this was with sgminer v5
1x6970
"remove-disabled" : true,
"device" : "1",
4x7950
"remove-disabled" : true,
"device" : "0,2,3,4",
I still hope someone will explain how to run latest sgminer with different cards in the system
Like one using x13mod and one using x13modold
The problem is that when setting x13mod, miner tries to compile x13mod for the older card... and fails and quits...
Using -d doesn't help. Binaries, obviously, I can't use - naming bin file doesn't work, maybe sgminer is checking not only the name but the actual content :/
Like one using x13mod and one using x13modold
The problem is that when setting x13mod, miner tries to compile x13mod for the older card... and fails and quits...
Using -d doesn't help. Binaries, obviously, I can't use - naming bin file doesn't work, maybe sgminer is checking not only the name but the actual content :/
Has anyone gotten -d switch to work? If I put -d 0,1,2,3,4 only one card works, if I take the -d completely out it works ok but after reboot I get:
Weird.
Weird.
start using task scheduler sir ?
some how it doesn't gives correct working folder i guess
Can someone help AMD n00b?? i just changed from Nvidia to Radeon and want to try to mine with this.
I know how to setup pools but cgminer and sgminer are new to me.
I'm using:
Asus Radeon 6950@6970 2GDDR5
Win 8.1 x64
8gb Ram 1600mhz
i5-4670
Thanks!!
Edit: Also if someone got .bat file for my gpu, can you please post it?
Has anyone gotten -d switch to work? If I put -d 0,1,2,3,4 only one card works, if I take the -d completely out it works ok but after reboot I get:
Weird.
Weird.
the version called NEW3 (downloaded yeaterday), works fine for me on 2 PCs - with 5850/6970 inside
x13modold/bitblockmodold
For x13 I even get higher speed than lasybear builds
I use different drivers, but put 14.6 ocl binaries in sgminer folder...
I can even post bin files for 5850/6970 ?
But I have 1 relatively big problem - miner Always starts with Intensity 12... -I in bat file or "intensity" in conf file don't work
Another problem... no way to use x13mod if in the system is present an older radeon
"remove-disabled" : true, is in conf file but it still tries to build bin file... and fails.Someone who can share bin file for 290?
x13modold/bitblockmodold
For x13 I even get higher speed than lasybear builds
I use different drivers, but put 14.6 ocl binaries in sgminer folder...
I can even post bin files for 5850/6970 ?
But I have 1 relatively big problem - miner Always starts with Intensity 12... -I in bat file or "intensity" in conf file don't work
Another problem... no way to use x13mod if in the system is present an older radeon
"remove-disabled" : true, is in conf file but it still tries to build bin file... and fails.Someone who can share bin file for 290?
Hey, thanks for the info.
I can't find NEW3 build or x13modold kernel from anywhere, do you have url?
Also bin files could work, though I have 5870 and 5830 cards.
the version called NEW3 (downloaded yeaterday), works fine for me on 2 PCs - with 5850/6970 inside
x13modold/bitblockmodold
For x13 I even get higher speed than lasybear builds
I use different drivers, but put 14.6 ocl binaries in sgminer folder...
I can even post bin files for 5850/6970 ?
But I have 1 relatively big problem - miner Always starts with Intensity 12... -I in bat file or "intensity" in conf file don't work
Another problem... no way to use x13mod if in the system is present an older radeon
"remove-disabled" : true, is in conf file but it still tries to build bin file... and fails.Someone who can share bin file for 290?
x13modold/bitblockmodold
For x13 I even get higher speed than lasybear builds
I use different drivers, but put 14.6 ocl binaries in sgminer folder...
I can even post bin files for 5850/6970 ?
But I have 1 relatively big problem - miner Always starts with Intensity 12... -I in bat file or "intensity" in conf file don't work
Another problem... no way to use x13mod if in the system is present an older radeon
"remove-disabled" : true, is in conf file but it still tries to build bin file... and fails.Someone who can share bin file for 290?
Jump to: