I am still getting 25+ hw errors on x15 using the given bin files for 13.12 drivers. Win7x64, 270x. Anyone get this setting "stable"?
Topic: New sgminer support x11, x13, x14 and x15, fresh (with source) - page 2. (Read 34212 times)
I am still getting 25+ hw errors on x15 using the given bin files for 13.12 drivers. Win7x64, 270x. Anyone get this setting "stable"?
I have mixed cards on one rig and if I try to set in config
suggestion?
Quote
"algorithm" : "bitblock,bitblock,bitblockold"
miner just ignore it, build ckolivas kernel and start with itsuggestion?
I have the same problem, my 2 cards R9-280x and 6950 won't mine, always the complete computer freezes (only "bitblock" setted) or when i try with
only "bitblockold" i got only rejects. But mining x11 for example works without problems.
I'm mining a darkcoin variant x11 and am getting my 7970's to 3.12mh each. Does any one have an optimal setting for these cards. This is only a little better than the other x11mod sgminer I was using. I'm hearing i should be getting 4 mh each or better. i'm having best luck with config file so a best case sample of that would be cool. 
I getting nothing but hardware errors with FRESH.
My bad, I put freshcoin as the Algo flag instead of fresh only....lol
Will there be a fresh mod for old AMD cards, ie. 5xxx/6xxx?
I getting nothing but hardware errors with FRESH.
Dear. Someone could put a file .bat for mining multicoin with Nicehash with this sgminer? . Thanks
I have 2x280x and 2x7950.
I have 2x280x and 2x7950.
Rather than a batch file you could try this: NiceHash with Radeon
I would suggest running two instances (one for the 2x280x and one for the 2x7950) as the hash rate ratio between algorithms may be different between the two models of card.
Thank you very much for your help my friend, for now goes perfect in my 280x.
Now, with NiceHash control, the program change the most proffit algorithms? or I have to change manually?
Nt: In "Action" I have in Auto. Thanks again
one config, 2 profiles
to run
first instance: sgminer.exe -c x15coin.conf
2nd instance: sgminer.exe -c x15coin.conf --default-profile x15old
problem: if set "remove-disabled":true... miner start 2nd instance and card there OFF
if not use "remove-disabled" miner incorrect work with "auto-fan" : true (keep 0% till temp lower "temp-target" and if above set cooler speed to 100%.. and to 0% again when lower target ....)
Code:
"profiles" : [
{
"name" : "x15",
"algorithm" : "bitblock",
"thread-concurrency" : "10240",
"gpu-memclock" : "1250",
"device" : "0,1"
},
{
"name" : "x15old",
"algorithm" : "bitblockold",
"thread-concurrency" : "7040",
"gpu-memclock" : "1150",
"device" : "2"
}
]
{
"name" : "x15",
"algorithm" : "bitblock",
"thread-concurrency" : "10240",
"gpu-memclock" : "1250",
"device" : "0,1"
},
{
"name" : "x15old",
"algorithm" : "bitblockold",
"thread-concurrency" : "7040",
"gpu-memclock" : "1150",
"device" : "2"
}
]
to run
first instance: sgminer.exe -c x15coin.conf
2nd instance: sgminer.exe -c x15coin.conf --default-profile x15old
problem: if set "remove-disabled":true... miner start 2nd instance and card there OFF
if not use "remove-disabled" miner incorrect work with "auto-fan" : true (keep 0% till temp lower "temp-target" and if above set cooler speed to 100%.. and to 0% again when lower target ....)
Dear. Someone could put a file .bat for mining multicoin with Nicehash with this sgminer? . Thanks
I have 2x280x and 2x7950.
I have 2x280x and 2x7950.
Rather than a batch file you could try this: NiceHash with Radeon
I would suggest running two instances (one for the 2x280x and one for the 2x7950) as the hash rate ratio between algorithms may be different between the two models of card.
I tried just about everything but can't get X15 to work properly.
It works fine on my R9 270X but not on my older 6990 cards.
It works fine on my R9 270X but not on my older 6990 cards.
You need to use bitblockold kernel and make sure your worksize is not 256, it has to be 64 or 128.
All changes by aznboy84 have been merged to official sgminer v5.0 beta, see this thread for more information about v5.0 https://bitcointalksearch.org/topic/ann-sgminer-v5-optimized-x11x13neoscryptlyra2reetc-kernel-switch-miner-632503
Dear. Someone could put a file .bat for mining multicoin with Nicehash with this sgminer? . Thanks
I have 2x280x and 2x7950.
I have 2x280x and 2x7950.
I tried just about everything but can't get X15 to work properly.
It works fine on my R9 270X but not on my older 6990 cards.
It works fine on my R9 270X but not on my older 6990 cards.
Wondering if someone could help me out, I compiled and tried /aznboy84/sgminer/tree/v5_0-x15 and /sgminer-dev/sgminer.git (not sure if that is exactly the same) but when i start it gives me a load of nonce errors. When i tried the compiled sgminer-5.0-pre-release-2014-06-30-linux-amd64.zip from nicehash.com both the darkcoin-mod and marucoind-mod work as expected and even a bit hash than the lasybear sgminer im currently using however the bitblock im only getting 2 mh/s with x2 7950 & 1 R9-270.
So i dont mind using the nicehash compiled but 2 mh/s seems slow. Fixing either ones would be cool for me. any help would be appreciated.
Im on ubunutu 13.04, using catalyst drivers 13. something (not 14.6) I also got the latest ADL_SDK files when I compiled. also it compiled fine no errors.
Thanks!
So i dont mind using the nicehash compiled but 2 mh/s seems slow. Fixing either ones would be cool for me. any help would be appreciated.
Im on ubunutu 13.04, using catalyst drivers 13. something (not 14.6) I also got the latest ADL_SDK files when I compiled. also it compiled fine no errors.
Thanks!
Same here. I use ubuntu too.
Do i have to upgrade my catalyst driver?
it is works fine on X15 and NIST5, but X13 can not work , someone help me with the bat file, please, my card is 270X
Use this, works for me.
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
sgminer --algorithm marucoin-mod -o stratum+tcp://east1.us.stratum.dedicatedpool.com:7020 -u x -p x -I 16 -w 128 -g 2 --gpu-platform 1 --no-submit-stale --lookup-gap 2 --thread-concurrency 8192
pause
https://dl.dropboxusercontent.com/u/107636106/marucoin-mod.rar
I solved it. For some reason I had to add this switch. -d switch doesn't work but adding this does.
--gpu-platform 1
We're rockin' now.
EDIT; The issue is with the AMD drivers which need that switch to work for some reason.
I think -d should work too but you need to also set --remove-disabled --gpu-platform 1
Code:
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
sgminer --pool-algorithm bitblock --no-submit-stale --gpu-platform 1 -o stratum+tcp://east1.us.stratum.dedicatedpool.com:6006 -u romes.15 -p x -g 2 -w 128 --gpu-engine 1020 --gpu-memclock 1450 --shaders 2048 --thread-concurrency 20481 -I 19 --worksize 256 --lookup-gap 0 --auto-fan --temp-target 77 --temp-overheat 83 --temp-cutoff 85
We're rockin' now.
EDIT; The issue is with the AMD drivers which need that switch to work for some reason.
it is works fine on X15 and NIST5, but X13 can not work , someone help me with the bat file, please, my card is 270X
great job 
using R9 280X, got 4.3M for x11, 2.9M for X15, unfourtunately,can't set successfully wiht X13.
PLZ fix the problem
using R9 280X, got 4.3M for x11, 2.9M for X15, unfourtunately,can't set successfully wiht X13.
PLZ fix the problem
anyone has 290(without x) bin file for X15, i can't upgrade to 14.6 cause it doesn't support +5 gpus
Use http://s2.stdns.ru/up/forum/941147_1.rar
New INF for 14.6 RC2 5+ GPU
From https://bitcointalksearch.org/topic/odded-amd-catalyst-146-rc-669227
Some help to set up 2x 5970, pls. Always 2 of the 4 cores give HW. The other 2 are OK.
Which kernel do u use, and what is your config file configuration please?I have HD5970 too.
Jump to: