gtx 970 without limits~160s/s
gtx 970 tdp limit 61%~140s/s
Topic: NiceHash EQM Zcash NVIDIA optimized miner [Maxwell/Pascal] + CPU mining v1.0.4c - page 31. (Read 238052 times)
December 03, 2016, 03:43:23 PM
December 03, 2016, 03:23:21 PM
For me 1.0.2b is still the fastest with the 750ti. Anyone have different results?
Yes, 1.0.2d which is the same as 1.0.2c but with parameters tuned for known cards is the fastest for my overclocked gtx750 1gb - 61-62sols1.0.2b was 59-60 sols. 1.0.2c was 57-58 sols
December 03, 2016, 01:25:00 PM
I got 155 sols/s with Nvidia GTX 980 ref card / win 10 64bit / nvidia driver 375.63 and the latest Nicehash Miner v1.0.2d
Power draw at the wall 180 watts for the whole system.
Trying get cpu (i7-5960x) mining working on the same pc , i got a error , for each core : "Unable to alloc locked pages (err=1314)" , but hashing speed increasing with 30-35 sols/s using 8 cores... power draw at the wall going up to 258 watts / us 120volt
Power draw at the wall 180 watts for the whole system.
Trying get cpu (i7-5960x) mining working on the same pc , i got a error , for each core : "Unable to alloc locked pages (err=1314)" , but hashing speed increasing with 30-35 sols/s using 8 cores... power draw at the wall going up to 258 watts / us 120volt
December 03, 2016, 01:22:19 PM
vanjuska@vanjuska-G31M-S2L:~/eqm_v1.0.2d_Linux_Ubuntu16$ ./eqm_ubuntu_16 -t 0 -cd 0 -b
bash: ./eqm_ubuntu_16: Permission denied
vanjuska@vanjuska-G31M-S2L:~/eqm_v1.0.2d_Linux_Ubuntu16$
Never got this one before, please check.
bash: ./eqm_ubuntu_16: Permission denied
vanjuska@vanjuska-G31M-S2L:~/eqm_v1.0.2d_Linux_Ubuntu16$
Never got this one before, please check.
chmod?
chmod fixed it thanks.
but still now performance improvement over "v1.0.2b"
1060 3g 145 sol/s.
153sols/s on "f" version, up from 140 sols/s on "b" version, so definitely 10 percent improvement, I guess djeZo deserves a medal!
Ubuntu with 1060 3G and -cm 0 parameter
Wattage is around 105W, 99 gpu usage.
I lowered tdp on 970 card to 50% and raised clock offset by 120 (1400 effective boost), getting 142 sols/s and 125W consumption.
Is memory overclocking worth it? How much should I raise it on 970?
Also, Nvidia Inspector shows P2 state. Is that bad? And if so, how to force P0 state?
Thanks to all the helpful people here and djeZo especially, may he live long and prosper.
And release 1.0.3 that will finally make those CUDA clusters SWEAT!
December 03, 2016, 01:18:18 PM
yep 1.0.2b is the fastest with the 750ti. C and D versions offer no speed bumps.
I'm hoping for some love for the 750ti in the coming versions.
I'm hoping for some love for the 750ti in the coming versions.
December 03, 2016, 12:34:56 PM
For me 1.0.2b is still the fastest with the 750ti. Anyone have different results?
December 03, 2016, 11:13:22 AM
Another fix for LINUX version ... sorry for the mess, this should give you optimal results now:
DOWNLOAD Linux Ubuntu 14.04 version
DOWNLOAD Linux Ubuntu 16.04 version
DOWNLOAD Linux Ubuntu 14.04 version
DOWNLOAD Linux Ubuntu 16.04 version
December 03, 2016, 10:52:51 AM
vanjuska@vanjuska-G31M-S2L:~/eqm_v1.0.2d_Linux_Ubuntu16$ ./eqm_ubuntu_16 -t 0 -cd 0 -b
bash: ./eqm_ubuntu_16: Permission denied
vanjuska@vanjuska-G31M-S2L:~/eqm_v1.0.2d_Linux_Ubuntu16$
Never got this one before, please check.
bash: ./eqm_ubuntu_16: Permission denied
vanjuska@vanjuska-G31M-S2L:~/eqm_v1.0.2d_Linux_Ubuntu16$
Never got this one before, please check.
chmod?
chmod fixed it thanks.
but still now performance improvement over "v1.0.2b"
1060 3g 145 sol/s.
December 03, 2016, 09:46:02 AM
vanjuska@vanjuska-G31M-S2L:~/eqm_v1.0.2d_Linux_Ubuntu16$ ./eqm_ubuntu_16 -t 0 -cd 0 -b
bash: ./eqm_ubuntu_16: Permission denied
vanjuska@vanjuska-G31M-S2L:~/eqm_v1.0.2d_Linux_Ubuntu16$
Never got this one before, please check.
bash: ./eqm_ubuntu_16: Permission denied
vanjuska@vanjuska-G31M-S2L:~/eqm_v1.0.2d_Linux_Ubuntu16$
Never got this one before, please check.
chmod?
December 03, 2016, 09:36:48 AM
vanjuska@vanjuska-G31M-S2L:~/eqm_v1.0.2d_Linux_Ubuntu16$ ./eqm_ubuntu_16 -t 0 -cd 0 -b
bash: ./eqm_ubuntu_16: Permission denied
vanjuska@vanjuska-G31M-S2L:~/eqm_v1.0.2d_Linux_Ubuntu16$
Never got this one before, please check.
bash: ./eqm_ubuntu_16: Permission denied
vanjuska@vanjuska-G31M-S2L:~/eqm_v1.0.2d_Linux_Ubuntu16$
Never got this one before, please check.
December 03, 2016, 05:53:59 AM
Latest LINUX release with fixed speedup (same or better speedup as windows version):
DOWNLOAD Linux Ubuntu 14.04 version
DOWNLOAD Linux Ubuntu 16.04 version
DOWNLOAD Linux Ubuntu 14.04 version
DOWNLOAD Linux Ubuntu 16.04 version
Same problem -( 67 % mem load and 98% gpu load VS 71% mem load and 99% gpu load on win version, hashrate is slower too
Update. problems only with ubuntu16 version
Code:
krnl@rig6:~/zcash/nicehash/4$ eqm_v1.0.2e_Linux_Ubuntu14/eqm_ubuntu_14 -t 0 -cd 0 -b
==================== www.nicehash.com ====================
EQM v1.0.2e equihash CPU&GPU Miner for NiceHash.
This miner is using proprietary base code by NiceHash.
CPU solver: by xenoncat
CUDA solver: by djeZo; heavily modified Tromp solver
==================== www.nicehash.com ====================
[13:59:03][0x00007f7436303740][info] Log started
[13:59:03][0x00007f7436303740][info] Starting up miner instances...
[13:59:03][0x00007f742c593700][info] device#0 | Initializing thread #0 (CUDA-DJEZO) GeForce GTX 1070 (#0) M=1
[13:59:05][0x00007f7436303740][info] Benchmarking, please wait about 20 seconds...
[13:59:25][0x00007f742c593700][info] device#0 | Thread #0 ended (CUDA-DJEZO)
[13:59:25][0x00007f7436303740][info] Benchmarking finished
[13:59:25][0x00007f7436303740][info] Total time : 20 s
[13:59:25][0x00007f7436303740][info] device#0: 130.057 I/s, 247.925 Sols/s
[13:59:25][0x00007f7436303740][info] Total measured: 130.057 I/s
[13:59:25][0x00007f7436303740][info] Total measured: 247.925 Sols/s
[13:59:25][0x00007f7436303740][info] Theoretical: 244.383 Sols/s
krnl@rig6:~/zcash/nicehash/4$ eqm_v1.0.2e_Linux_Ubuntu16/eqm_ubuntu_16 -t 0 -cd 0 -b
==================== www.nicehash.com ====================
EQM v1.0.2e equihash CPU&GPU Miner for NiceHash.
This miner is using proprietary base code by NiceHash.
CPU solver: by xenoncat
CUDA solver: by djeZo; heavily modified Tromp solver
==================== www.nicehash.com ====================
[13:59:33][0x00007fd8296bd740][info] Log started
[13:59:33][0x00007fd8296bd740][info] Starting up miner instances...
[13:59:33][0x00007fd81f94e700][info] device#0 | Initializing thread #0 (CUDA-DJEZO) GeForce GTX 1070 (#0) M=1
[13:59:35][0x00007fd8296bd740][info] Benchmarking, please wait about 20 seconds...
[13:59:55][0x00007fd81f94e700][info] device#0 | Thread #0 ended (CUDA-DJEZO)
[13:59:55][0x00007fd8296bd740][info] Benchmarking finished
[13:59:55][0x00007fd8296bd740][info] Total time : 20 s
[13:59:55][0x00007fd8296bd740][info] device#0: 124.706 I/s, 237.174 Sols/s
[13:59:55][0x00007fd8296bd740][info] Total measured: 124.706 I/s
[13:59:55][0x00007fd8296bd740][info] Total measured: 237.174 Sols/s
[13:59:55][0x00007fd8296bd740][info] Theoretical: 234.329 Sols/s
December 03, 2016, 05:20:03 AM
Latest LINUX release with fixed speedup (same or better speedup as windows version):
DOWNLOAD Linux Ubuntu 14.04 version
DOWNLOAD Linux Ubuntu 16.04 version
DOWNLOAD Linux Ubuntu 14.04 version
DOWNLOAD Linux Ubuntu 16.04 version
December 02, 2016, 09:34:11 PM
on my 5x 1070 rig this (and any other ZEC miner) hard locks after a while and I can't figure out why, even at stock clocks, this is on an asrock z97 extreme 6 with powered usb risers, same system will run ETH or LBRY for days without issue
any ideas?
any ideas?
December 02, 2016, 05:54:25 PM
Previous version any difference?
In previous version speed is same, maybe 1-2 sols diff
Ah, we made mistake building for Linux, forgot to include one compile parameter. Will release new ver soon.
December 02, 2016, 05:44:26 PM
afther finding 5 or 6 shares the programs stops ... version c and d
any solutions ?
b works ( 5x gtx 1070g1 and i7 3930k )
*edit :
i found the problem ... i controll the rig with teamviewer and i don`t have a display attached to it . if i start the miner without the gpu that is in pcie x 16 slot it works .
any help to make it run for all cards ?
windows 10 system
any solutions ?
b works ( 5x gtx 1070g1 and i7 3930k )
*edit :
i found the problem ... i controll the rig with teamviewer and i don`t have a display attached to it . if i start the miner without the gpu that is in pcie x 16 slot it works .
any help to make it run for all cards ?
windows 10 system
IT WORKS WITH TIGHTVNC--
TightVNC is similar to TeamViewer and free. I never tried TeamViewer, but TightVNC allows all cards to run on a headless system. My OS is Win 7 x64. TightVNC is just as fast as Putty, but allows a complete desktop from remote. --scryptr
EDIT: There is also a monitor-emulator plug made by FitPC. I think it has an HDMI male interface plug. --scryptr
Thank you for info!
I will try it, case some times i have same troubles, but it appears at high mem OC cards..
December 02, 2016, 05:14:40 PM
Is there any speed up in d-version?
Don't see any speed up from 1.0.2c with gtx 1070 or 1060 3gb December 02, 2016, 04:57:34 PM
Previous version any difference?
In previous version speed is same, maybe 1-2 sols diff
December 02, 2016, 04:51:33 PM
Previous version any difference?
December 02, 2016, 04:46:43 PM
You tested on Ubuntu 14 or 16?
ubuntu 16 is host system, tested both
December 02, 2016, 04:46:14 PM
You tested on Ubuntu 14 or 16?
Jump to: