Topic: NobleCoin[NOBL] - 8% PoS | 1Yr+ | MARKETPLACE | PAY | GIFT | CHARITIES/MERCHANTS - page 123. (Read 1053168 times)
March 04, 2015, 02:15:56 PM
Can't tell what the status on C-Cex is. Trading has not been suspended, no annoucement, same balance.
March 04, 2015, 02:11:18 PM
Balance on Poloniex is same as before, but it says "Currency frozen", so can't withdraw to begin staking yet. 
I do not know if they provide fresh information. Or if this is previous balance.
March 04, 2015, 02:07:25 PM
Balance on Poloniex is same as before, but it says "Currency frozen", so can't withdraw to begin staking yet.
March 04, 2015, 02:00:37 PM
The community PoA funds wallet has been moved over successfully too, has the same amount of coins in it 
March 04, 2015, 01:54:18 PM
Ours was accurate to within ~0.02 NOBL so all good here.
March 04, 2015, 01:34:09 PM
Plan of migration(on my side)
1. Just after block #534500 I take snapshot of PoW/old blockchain using fairglu's script
2. Distribute coins over test network (this takes about 45 minutes if no issues are spotted)
3. Distribute coins over real PoS blockchain (another 45 minutes)
This means whole process takes about 90 minutes. And if you imported priv keys from PoW wallet to PoS wallet you should see proper balance when whole process is finished.
1. Just after block #534500 I take snapshot of PoW/old blockchain using fairglu's script
2. Distribute coins over test network (this takes about 45 minutes if no issues are spotted)
3. Distribute coins over real PoS blockchain (another 45 minutes)
This means whole process takes about 90 minutes. And if you imported priv keys from PoW wallet to PoS wallet you should see proper balance when whole process is finished.
Block #534500. Beginning work. ETA: 90 minutes
Can everyone check if your balances are fine?
Distribution of coins is finished. However I have noticed errors like this:
"ERROR: FetchInputs() : c1c1446c2c mempool Tx prev not found 3c7e85184a"
Trying to find out if this is a big issue or not.
March 04, 2015, 01:21:31 PM
noblecoin-qt -salvagewallet doesnt work for me
What happens? Is your wallet encrypted?
I just ran it and it worked. Obviously we do not have our coins yet because the official switch still has 45 minutes until it actually happens.
I did notice though that the 2.0 wallet is back to the old ugly style wallet and it cuts off our last character in our wallet address when you look at the "receive coins" section or do a "copy address"
Does this mean our wallet address actually changes and is now under a new format of 1 less character or is this just a problem with the wallet that needs to be fixed?
ALSO: Just got all my coins in my new POS wallet via -salvagewallet command. Worked perfectly.
March 04, 2015, 12:52:47 PM
March 04, 2015, 12:43:20 PM
Is C-Cex in on the swap?
March 04, 2015, 12:37:18 PM
To keep the old private key just copy the wallet .dat from Roaming in the new wallet?
March 04, 2015, 12:28:31 PM
noblecoin-qt -salvagewallet doesnt work for me
What happens? Is your wallet encrypted?
no it is not...can You please explain procedure ones more - step by step (version for total dummies please)
Right now I need to focus on making the switch happen. But please write what exactly you did so someone will be able to help you.
In particular please provide information: have you seen any errors? or is the problem that you see balance of 0?
In fact there is "step by step version" which describes how to do it manually. You can take a look:
https://github.com/eagleflies/noblecoin/wiki/Manual-way-of-importing-private-keys
Yep...but Im having error
when I strike importprivatekey on new wallet (with private key of course and the space between command and private key
)Method not found (code -32601)
(win 8.1 64bit)
My bad! Typo. It should be 'importprivkey'
Corrected docs.
....im so stupid....I didnt do that for a while and I totally forget to analyse command....good that You notice that... thx man
well, actually at the top of the page this command was written correctly. I made mistake with 'detailed version'
March 04, 2015, 12:27:49 PM
noblecoin-qt -salvagewallet doesnt work for me
What happens? Is your wallet encrypted?
no it is not...can You please explain procedure ones more - step by step (version for total dummies please)
Right now I need to focus on making the switch happen. But please write what exactly you did so someone will be able to help you.
In particular please provide information: have you seen any errors? or is the problem that you see balance of 0?
In fact there is "step by step version" which describes how to do it manually. You can take a look:
https://github.com/eagleflies/noblecoin/wiki/Manual-way-of-importing-private-keys
Yep...but Im having error
when I strike importprivatekey on new wallet (with private key of course and the space between command and private key
)Method not found (code -32601)
(win 8.1 64bit)
My bad! Typo. It should be 'importprivkey'
Corrected docs.
....im so stupid....I didnt do that for a while and I totally forget to analyse command....good that You notice that... thx man
March 04, 2015, 12:21:28 PM
noblecoin-qt -salvagewallet doesnt work for me
What happens? Is your wallet encrypted?
no it is not...can You please explain procedure ones more - step by step (version for total dummies please)
Right now I need to focus on making the switch happen. But please write what exactly you did so someone will be able to help you.
In particular please provide information: have you seen any errors? or is the problem that you see balance of 0?
In fact there is "step by step version" which describes how to do it manually. You can take a look:
https://github.com/eagleflies/noblecoin/wiki/Manual-way-of-importing-private-keys
Yep...but Im having error
when I strike importprivatekey on new wallet (with private key of course and the space between command and private key
)Method not found (code -32601)
(win 8.1 64bit)
My bad! Typo. It should be 'importprivkey'
Corrected docs.
March 04, 2015, 12:02:00 PM
noblecoin-qt -salvagewallet doesnt work for me
What happens? Is your wallet encrypted?
no it is not...can You please explain procedure ones more - step by step (version for total dummies please)
Right now I need to focus on making the switch happen. But please write what exactly you did so someone will be able to help you.
In particular please provide information: have you seen any errors? or is the problem that you see balance of 0?
In fact there is "step by step version" which describes how to do it manually. You can take a look:
https://github.com/eagleflies/noblecoin/wiki/Manual-way-of-importing-private-keys
Yep...but Im having error
when I strike importprivatekey on new wallet (with private key of course and the space between command and private key
)Method not found (code -32601)
(win 8.1 64bit)
March 04, 2015, 12:01:16 PM
Plan of migration(on my side)
1. Just after block #534500 I take snapshot of PoW/old blockchain using fairglu's script
2. Distribute coins over test network (this takes about 45 minutes if no issues are spotted)
3. Distribute coins over real PoS blockchain (another 45 minutes)
This means whole process takes about 90 minutes. And if you imported priv keys from PoW wallet to PoS wallet you should see proper balance when whole process is finished.
1. Just after block #534500 I take snapshot of PoW/old blockchain using fairglu's script
2. Distribute coins over test network (this takes about 45 minutes if no issues are spotted)
3. Distribute coins over real PoS blockchain (another 45 minutes)
This means whole process takes about 90 minutes. And if you imported priv keys from PoW wallet to PoS wallet you should see proper balance when whole process is finished.
Block #534500. Beginning work. ETA: 90 minutes
March 04, 2015, 11:38:22 AM
Dear Admin,
I am using version v1.1.0.3 .
http://prntscr.com/6cmqsm
I can not transfer my coins to Bittrex from my wallet . Please help me for fix it ! What should I do atm ?
Sincere thanks so much !
I am using version v1.1.0.3 .
http://prntscr.com/6cmqsm
I can not transfer my coins to Bittrex from my wallet . Please help me for fix it ! What should I do atm ?
Sincere thanks so much !
1. Do not panic
2. It is too late to convert coins via exchange. But you can do it by yourself too without any time limit.
2.1. This is the recommended method: https://github.com/eagleflies/noblecoin/wiki/Importing-private-keys-from-old-wallet.dat-using---salvagewallet-option
2.2. This is manual method https://github.com/eagleflies/noblecoin/wiki/Manual-way-of-importing-private-keys
3. To be able to see proper balance in your new wallet two conditions must be met:
- you need to import private keys using any method
- coins need to be distributed first (This has not started yet. I will announce when this happens)
March 04, 2015, 11:33:23 AM
Dear Admin,
I am using version v1.1.0.3 .
http://prntscr.com/6cmqsm
I can not transfer my coins to Bittrex from my wallet . Please help me for fix it ! What should I do atm ?
Sincere thanks so much !
I am using version v1.1.0.3 .
http://prntscr.com/6cmqsm
I can not transfer my coins to Bittrex from my wallet . Please help me for fix it ! What should I do atm ?
Sincere thanks so much !
March 04, 2015, 11:26:19 AM
I have millions of coins around the markets.. I hope the price will go up soon! I Like this coin!
March 04, 2015, 11:23:14 AM
noblecoin-qt -salvagewallet doesnt work for me
What happens? Is your wallet encrypted?
I just ran it and it worked. Obviously we do not have our coins yet because the official switch still has 45 minutes until it actually happens.
I did notice though that the 2.0 wallet is back to the old ugly style wallet and it cuts off our last character in our wallet address when you look at the "receive coins" section or do a "copy address"
The switch is actually a process. It is likely to take about 90 minutes. Please take a look at details https://bitcointalksearch.org/topic/m.10655417
March 04, 2015, 11:22:19 AM
noblecoin-qt -salvagewallet doesnt work for me
What happens? Is your wallet encrypted?
no it is not...can You please explain procedure ones more - step by step (version for total dummies please)
Right now I need to focus on making the switch happen. But please write what exactly you did so someone will be able to help you.
In particular please provide information: have you seen any errors? or is the problem that you see balance of 0?
In fact there is "step by step version" which describes how to do it manually. You can take a look:
https://github.com/eagleflies/noblecoin/wiki/Manual-way-of-importing-private-keys
Jump to: