noblecoin-qt -salvagewallet doesnt work for me 
What happens? Is your wallet encrypted?
no it is not...can You please explain procedure ones more - step by step (version for total dummies please)
Topic: NobleCoin[NOBL] - 8% PoS | 1Yr+ | MARKETPLACE | PAY | GIFT | CHARITIES/MERCHANTS - page 124. (Read 1053098 times)
March 04, 2015, 12:12:53 PM
What happens? Is your wallet encrypted?
no it is not...can You please explain procedure ones more - step by step (version for total dummies please)
March 04, 2015, 12:11:49 PM
noblecoin-qt -salvagewallet doesnt work for me
What happens? Is your wallet encrypted?
I just ran it and it worked. Obviously we do not have our coins yet because the official switch still has 45 minutes until it actually happens.
I did notice though that the 2.0 wallet is back to the old ugly style wallet and it cuts off our last character in our wallet address when you look at the "receive coins" section or do a "copy address"
March 04, 2015, 11:52:24 AM
noblecoin-qt -salvagewallet doesnt work for me
What happens? Is your wallet encrypted?
March 04, 2015, 11:50:37 AM
noblecoin-qt -salvagewallet doesnt work for me
March 04, 2015, 11:30:26 AM
If the community is interested, especially since you're moving to pure PoS, we're accepting new payouts coins to the xpool.ca multipool. Info in my sig.
Cheers!
Cheers!
March 04, 2015, 11:29:41 AM
Yay, found my first block
What do you have in your noblecoin.conf file? I have been mining for about 2 hours with no blocks found yet, I have about 60kh running so far. No blocks
I haven't found any in a while either and I have about 25kh. Have found 9 blocks so far, but a lot of those when the diff was mega low.
I got a block at last.
Maybe it's just getting competitive
You can use 'getmininginfo' to get more info. Also you can check how blocks are being mined at our block explorer.
https://chainz.cryptoid.info/nobles/#
March 04, 2015, 11:26:23 AM
Nice to see that the mining is going smooth. Should allow for an trouble free switch
March 04, 2015, 11:18:35 AM
Yay, found my first block
What do you have in your noblecoin.conf file? I have been mining for about 2 hours with no blocks found yet, I have about 60kh running so far. No blocks
I haven't found any in a while either and I have about 25kh. Have found 9 blocks so far, but a lot of those when the diff was mega low.
I got a block at last.
Maybe it's just getting competitive
March 04, 2015, 10:40:42 AM
Yay, found my first block
What do you have in your noblecoin.conf file? I have been mining for about 2 hours with no blocks found yet, I have about 60kh running so far. No blocks
I haven't found any in a while either and I have about 25kh. Have found 9 blocks so far, but a lot of those when the diff was mega low.
March 04, 2015, 10:31:00 AM
Yay, found my first block
What do you have in your noblecoin.conf file? I have been mining for about 2 hours with no blocks found yet, I have about 60kh running so far. No blocks
March 04, 2015, 10:29:11 AM
March 04, 2015, 10:15:07 AM
Yay, found my first block
March 04, 2015, 09:43:14 AM
Plan of migration(on my side)
1. Just after block #534500 I take snapshot of PoW/old blockchain using fairglu's script
2. Distribute coins over test network (this takes about 45 minutes if no issues are spotted)
3. Distribute coins over real PoS blockchain (another 45 minutes)
This means whole process takes about 90 minutes. And if you imported priv keys from PoW wallet to PoS wallet you should see proper balance when whole process is finished.
1. Just after block #534500 I take snapshot of PoW/old blockchain using fairglu's script
2. Distribute coins over test network (this takes about 45 minutes if no issues are spotted)
3. Distribute coins over real PoS blockchain (another 45 minutes)
This means whole process takes about 90 minutes. And if you imported priv keys from PoW wallet to PoS wallet you should see proper balance when whole process is finished.
March 04, 2015, 08:46:19 AM
No worries. Good luck with mining 
Thanks. Now I only need some luck to get my remaining coins from coinmine.pw. All payouts worked well so far but since a few hours it seems it's stuck.
I see. If they will not make it before the switch, they will be able to migrate their wallet too and send the coins after the switch.
Good to hear. The pool is great but the admin either lazy or not very interested. Missed many coin switched and miners lost a lot of coins (i.e. VIA).
I do not know him but he actually promptly responded to my email with information about Noblecoin switching to PoS. So he pays some attention.
March 04, 2015, 08:42:20 AM
No worries. Good luck with mining
Thanks. Now I only need some luck to get my remaining coins from coinmine.pw. All payouts worked well so far but since a few hours it seems it's stuck.
I see. If they will not make it before the switch, they will be able to migrate their wallet too and send the coins after the switch.
Good to hear. The pool is great but the admin either lazy or not very interested. Missed many coin switched and miners lost a lot of coins (i.e. VIA).
March 04, 2015, 08:41:05 AM
No worries. Good luck with mining
Thanks. Now I only need some luck to get my remaining coins from coinmine.pw. All payouts worked well so far but since a few hours it seems it's stuck.
I see. If they do not make it before the switch, they will be able to migrate their wallet too and send the coins after the switch.
March 04, 2015, 08:35:49 AM
No worries. Good luck with mining
Thanks. Now I only need some luck to get my remaining coins from coinmine.pw. All payouts worked well so far but since a few hours it seems it's stuck.
March 04, 2015, 08:33:15 AM
What are the nodes that it wallet should be connecting to?
Try 104.236.195.137
Still no connection with the new wallet, even with this node.
What wallet version are you using?
you can check this by issuing 'getinfo' command:
"version" : "v2.0.0.0",
"protocolversion" : 89000,
"walletversion" : 60000,
if this is fine you can also try another node: addnode=194.181.3.79
Yes, getinfo gives the same information as yours.
The command addnode IP add doesn't work in the debug console. How to name the config file, noblcoinpos like the folder it created?
"noblecoin.conf" is config file name
Yes, you need to provide '-addnode' during startup so if you are under windows you can create shortcut to your wallet and modify it to include '-addnode=...'
Ok, found the mistake. It created a folder NobleCoinPOS in Appdata/Roaming. I created a conf file and names it Noblcoin.conf but that caused an error message. So I tried it with the config file's name NoblecoinPos.
I deleted the old wallet's folder and the newly created one, started the wallet and created noblecoin.conf. Now I'm connected. Thanks!!
No worries. Good luck with mining
What probably happened is this: at time of first connection your client does not know any IP addresses. It uses IRC to find other peers. However sometimes connection to IRC is delayed. After it finishes connection to IRC it learns and stores IP addresses of other peers. So next time you start your wallet it will use this information.
March 04, 2015, 08:32:10 AM
What are the nodes that it wallet should be connecting to?
Try 104.236.195.137
Still no connection with the new wallet, even with this node.
What wallet version are you using?
you can check this by issuing 'getinfo' command:
"version" : "v2.0.0.0",
"protocolversion" : 89000,
"walletversion" : 60000,
if this is fine you can also try another node: addnode=194.181.3.79
Yes, getinfo gives the same information as yours.
The command addnode IP add doesn't work in the debug console. How to name the config file, noblcoinpos like the folder it created?
"noblecoin.conf" is config file name
Yes, you need to provide '-addnode' during startup so if you are under windows you can create shortcut to your wallet and modify it to include '-addnode=...'
Ok, found the mistake. It created a folder NobleCoinPOS in Appdata/Roaming. I created a conf file and names it Noblcoin.conf but that caused an error message. So I tried it with the config file's name NoblecoinPos.
I deleted the old wallet's folder and the newly created one, started the wallet and created noblecoin.conf. Now I'm connected. Thanks!!
March 04, 2015, 08:32:07 AM
Could you provide output of 'getinfo' command? What URL have you used to download the wallet?
Downloaded from the link you posted
https://bitcointalksearch.org/topic/m.10653046
getinfo
Code:

{
"version" : "v2.0.0.0",
"protocolversion" : 89000,
"walletversion" : 60000,
"balance" : 0.00000000,
"newmint" : 0.00000000,
"stake" : 0.00000000,
"blocks" : 1604,
"timeoffset" : 3,
"moneysupply" : 2400392050.62909222,
"connections" : 4,
"proxy" : "",
"difficulty" : {
"proof-of-work" : 0.02403307,
"proof-of-stake" : 0.00377375
},
"testnet" : false,
"keypoololdest" : 1425468908,
"keypoolsize" : 105,
"mininput" : 0.00000000,
"paytxfee" : 0.00000000,
"errors" : ""
}
{
"version" : "v2.0.0.0",
"protocolversion" : 89000,
"walletversion" : 60000,
"balance" : 0.00000000,
"newmint" : 0.00000000,
"stake" : 0.00000000,
"blocks" : 1604,
"timeoffset" : 3,
"moneysupply" : 2400392050.62909222,
"connections" : 4,
"proxy" : "",
"difficulty" : {
"proof-of-work" : 0.02403307,
"proof-of-stake" : 0.00377375
},
"testnet" : false,
"keypoololdest" : 1425468908,
"keypoolsize" : 105,
"mininput" : 0.00000000,
"paytxfee" : 0.00000000,
"errors" : ""
}
Yep, everything looks good to me.
Jump to: