https://terrahash.com/terrahash-avalon-assembly-reserve-your-spot-with-5/
NEWS FROM TERRAHASH.
Topic: Off-Topic - page 149. (Read 384417 times)
just got the email -- A post of interest: "TerraHash Avalon Assembly (Reserve your spot with 5%)"
never doubted for a second -- well done TH!!
never doubted for a second -- well done TH!!
Hey Atomic, just coincidence, but I am in NY state near Buffalo visiting family right now...where about's are you? Not that I can take over your order.....at the moment....lol
About 2.5 hours away. Enjoy Niagara falls!
oh ya....you know we will,,,
Btw, I am making a trip down to Santa Clara on Thursday to see how everything is going and to get the chip order pics. Amir and I spoke on the phone today and he said that any time on Thursday would be good. I'll stop by there in the afternoon. He also confirmed that all of our boards will come with I2C cables.
Hey Knightlife, If you can please just shore up a list for us from Amir, of what exactly we will get with the boards that ship. I think we know, but now we are hearing ic2 cables as well, which is great but that's new to me. And thanks again KL Will do. I added that to my list of questions for Thursday.
Can you also ask how the 4x k16 are connected to make a k64? unless they respond in here before then, I would like to know if one can easily separate a k64 into the k16s that make it up.
Single PCB with the K16 design printed 4 times on it and connected using I2C jumpers?
https://raw.github.com/bkkcoins/klondike/master/docs/KLego.pdf
Pretty self explanatory.
nevermind then, I didn't catch the bit where it does say the k64 is one larger pcb.
Terrahash,
I'm making some adapters for your K16's and K64's so they can be mounted into standard PC cases.
Do you know the dimensions of the heatsink you'll be using for the K16? Or, do you know total thickness of your K16's including heatsink (from the top of the capacitor on top, to the top of the heatsink on bottom)?
OR: What is the center-of-hole to center-of-hole spacing between K16 mount points in the DX Mini case?
Thanks!
I'm making some adapters for your K16's and K64's so they can be mounted into standard PC cases.
Do you know the dimensions of the heatsink you'll be using for the K16? Or, do you know total thickness of your K16's including heatsink (from the top of the capacitor on top, to the top of the heatsink on bottom)?
OR: What is the center-of-hole to center-of-hole spacing between K16 mount points in the DX Mini case?
Thanks!
Btw, I am making a trip down to Santa Clara on Thursday to see how everything is going and to get the chip order pics. Amir and I spoke on the phone today and he said that any time on Thursday would be good. I'll stop by there in the afternoon. He also confirmed that all of our boards will come with I2C cables.
Hey Knightlife, If you can please just shore up a list for us from Amir, of what exactly we will get with the boards that ship. I think we know, but now we are hearing ic2 cables as well, which is great but that's new to me. And thanks again KL Will do. I added that to my list of questions for Thursday.
Can you also ask how the 4x k16 are connected to make a k64? unless they respond in here before then, I would like to know if one can easily separate a k64 into the k16s that make it up.
Single PCB with the K16 design printed 4 times on it and connected using I2C jumpers?
https://raw.github.com/bkkcoins/klondike/master/docs/KLego.pdf
Pretty self explanatory.
Btw, I am making a trip down to Santa Clara on Thursday to see how everything is going and to get the chip order pics. Amir and I spoke on the phone today and he said that any time on Thursday would be good. I'll stop by there in the afternoon. He also confirmed that all of our boards will come with I2C cables.
Hey Knightlife, If you can please just shore up a list for us from Amir, of what exactly we will get with the boards that ship. I think we know, but now we are hearing ic2 cables as well, which is great but that's new to me. And thanks again KL Will do. I added that to my list of questions for Thursday.
Can you also ask how the 4x k16 are connected to make a k64? unless they respond in here before then, I would like to know if one can easily separate a k64 into the k16s that make it up.
Single PCB with the K16 design printed 4 times on it and connected using I2C jumpers?
Btw, I am making a trip down to Santa Clara on Thursday to see how everything is going and to get the chip order pics. Amir and I spoke on the phone today and he said that any time on Thursday would be good. I'll stop by there in the afternoon. He also confirmed that all of our boards will come with I2C cables.
Hey Knightlife, If you can please just shore up a list for us from Amir, of what exactly we will get with the boards that ship. I think we know, but now we are hearing ic2 cables as well, which is great but that's new to me. And thanks again KL Will do. I added that to my list of questions for Thursday.
Can you also ask how the 4x k16 are connected to make a k64? unless they respond in here before then, I would like to know if one can easily separate a k64 into the k16s that make it up.
The I2C connector is 4 pins. There are 4 connectors on each board. 2 on both sides of the USB connector and 2 on the edges right next to the edge with the USB connector. The 3 Pin connector is for the fan. TerraHash boards will each come with a I2C jumper cable to daisy chain the board with another one.
That is awesome. So we are going to have a fan, heatsink, and I2C connectors packaged alongside our K16s? How about standoffs for stacking K16s?
yes and send someone to my house to set them up too!!
My Order 548 for:
TerraHash DX Large × 1
Number of Modules:
9 (162 GHash/sec)
Paypal's final day is today for a response from Terrahash. With the recent good news, if someone wanted to buy this from me, I would sell it, but it would have to be in the next 12 hours that BTC is in my account.
130 BTC - But this means it would probably have to ship to me, and then I would immediately, without unpacking it ship it to you within the US (or additional charges apply).
Unlikely, but I figured I'd offer one last time before the refund is processed. I'd give complete access to my account as well.
TerraHash DX Large × 1
Number of Modules:
9 (162 GHash/sec)
Paypal's final day is today for a response from Terrahash. With the recent good news, if someone wanted to buy this from me, I would sell it, but it would have to be in the next 12 hours that BTC is in my account.
130 BTC - But this means it would probably have to ship to me, and then I would immediately, without unpacking it ship it to you within the US (or additional charges apply).
Unlikely, but I figured I'd offer one last time before the refund is processed. I'd give complete access to my account as well.
To those asking on PM, I'm located in NY. Would consider a small BTC downpayment to cancel the dispute, as I think the CC would still cover any issues. It would have to be today though with the dispute nearly out of time. PM for any info, I won't clutter the thread up with any more of this. This also assumes that Terrahash does not object to this.
The I2C connector is 4 pins. There are 4 connectors on each board. 2 on both sides of the USB connector and 2 on the edges right next to the edge with the USB connector. The 3 Pin connector is for the fan. TerraHash boards will each come with a I2C jumper cable to daisy chain the board with another one.
That is awesome. So we are going to have a fan, heatsink, and I2C connectors packaged alongside our K16s? How about standoffs for stacking K16s?
yes and send someone to my house to set them up too!!
Btw, I am making a trip down to Santa Clara on Thursday to see how everything is going and to get the chip order pics. Amir and I spoke on the phone today and he said that any time on Thursday would be good. I'll stop by there in the afternoon. He also confirmed that all of our boards will come with I2C cables.
Hey Knightlife, If you can please just shore up a list for us from Amir, of what exactly we will get with the boards that ship. I think we know, but now we are hearing ic2 cables as well, which is great but that's new to me. And thanks again KL Will do. I added that to my list of questions for Thursday.
My Order 548 for:
TerraHash DX Large × 1
Number of Modules:
9 (162 GHash/sec)
Paypal's final day is today for a response from Terrahash. With the recent good news, if someone wanted to buy this from me, I would sell it, but it would have to be in the next 12 hours that BTC is in my account.
130 BTC - But this means it would probably have to ship to me, and then I would immediately, without unpacking it ship it to you within the US (or additional charges apply).
Unlikely, but I figured I'd offer one last time before the refund is processed. I'd give complete access to my account as well.
TerraHash DX Large × 1
Number of Modules:
9 (162 GHash/sec)
Paypal's final day is today for a response from Terrahash. With the recent good news, if someone wanted to buy this from me, I would sell it, but it would have to be in the next 12 hours that BTC is in my account.
130 BTC - But this means it would probably have to ship to me, and then I would immediately, without unpacking it ship it to you within the US (or additional charges apply).
Unlikely, but I figured I'd offer one last time before the refund is processed. I'd give complete access to my account as well.
To those asking on PM, I'm located in NY. Would consider a small BTC downpayment to cancel the dispute, as I think the CC would still cover any issues. It would have to be today though with the dispute nearly out of time. PM for any info, I won't clutter the thread up with any more of this. This also assumes that Terrahash does not object to this.
Btw, I am making a trip down to Santa Clara on Thursday to see how everything is going and to get the chip order pics. Amir and I spoke on the phone today and he said that any time on Thursday would be good. I'll stop by there in the afternoon. He also confirmed that all of our boards will come with I2C cables.
Hey Knightlife, If you can please just shore up a list for us from Amir, of what exactly we will get with the boards that ship. I think we know, but now we are hearing ic2 cables as well, which is great but that's new to me. And thanks again KL 3 questions for Amir / Terrahash:
1) A normal PSU does not have 10 or 20 connectors with 6 pin so ... Does DX Mini case come with adapters for 20 modules even if I ordered only 10 ? If yes, I assume this adapters are available even if I ordered the case without PSU.
2) Similar question about cooling system and fans ... I assume DX Mini case will have full cooling for 20 modules regardless of number of modules ordered in the case ...
3) How many USB cables I need to use to connect a DX Mini with 10 boards to a computer ? Do I need 1 (from DX Mini to computer) or 10 (for each module) ? I hope only one ...
My concern is about a possible upgrade (buy more modules) and I wand to understand if I need anything else other than plug in the module itself. Do I need any extra cable or adapter or anything else ...
1) A normal PSU does not have 10 or 20 connectors with 6 pin so ... Does DX Mini case come with adapters for 20 modules even if I ordered only 10 ? If yes, I assume this adapters are available even if I ordered the case without PSU.
2) Similar question about cooling system and fans ... I assume DX Mini case will have full cooling for 20 modules regardless of number of modules ordered in the case ...
3) How many USB cables I need to use to connect a DX Mini with 10 boards to a computer ? Do I need 1 (from DX Mini to computer) or 10 (for each module) ? I hope only one ...
My concern is about a possible upgrade (buy more modules) and I wand to understand if I need anything else other than plug in the module itself. Do I need any extra cable or adapter or anything else ...
Terrahash, based on your message I assume the answer to my 3rd question is 1 USB cable to PC ... I2C jumper cable (provided by Terrahash) is used as connection between K16 boards.
The I2C connector is 4 pins. There are 4 connectors on each board. 2 on both sides of the USB connector and 2 on the edges right next to the edge with the USB connector. The 3 Pin connector is for the fan. TerraHash boards will each come with a I2C jumper cable to daisy chain the board with another one.
Please, can you please comment on my first 2 questions ?
The I2C connector is 4 pins. There are 4 connectors on each board. 2 on both sides of the USB connector and 2 on the edges right next to the edge with the USB connector. The 3 Pin connector is for the fan. TerraHash boards will each come with a I2C jumper cable to daisy chain the board with another one.
That is awesome. So we are going to have a fan, heatsink, and I2C connectors packaged alongside our K16s? How about standoffs for stacking K16s?
Btw, I am making a trip down to Santa Clara on Thursday to see how everything is going and to get the chip order pics. Amir and I spoke on the phone today and he said that any time on Thursday would be good. I'll stop by there in the afternoon. He also confirmed that all of our boards will come with I2C cables.
The I2C connector is 4 pins. There are 4 connectors on each board. 2 on both sides of the USB connector and 2 on the edges right next to the edge with the USB connector. The 3 Pin connector is for the fan. TerraHash boards will each come with a I2C jumper cable to daisy chain the board with another one.
That's great. I'm glad the boards are coming with I2C cables. No need for us to buy them now. Thanks TH.
Yeah there is one 3 pin header for them i believe.
So to connect two adjacent K-16's you need a 3 pin female to female header block between the boards that they both plug into?
I guess once we see the physical boards it will all become clear.
Will the boards lock, solder together or just jumpers? Any cables have to be special to reduce noise? Each board have to have power or does being connected take care of it? What is the best type of computer to use? How to mount and cool them. Etc etc etc.
These headaches are why I'm having the boards hosted. If I don't like hosting I will buy and have them put in a pre-designed case.
Jump to: