Official BITMINE CoinCraft series 28nm ASIC miners thread - page 79.

Collider

hero member

Activity: 714

Merit: 500

Quote from: Collider on May 03, 2014, 10:43:52 AM

Quote from: Wolke on May 03, 2014, 10:41:56 AM

Quote from: Collider on May 03, 2014, 10:39:49 AM

Quote from: Wolke on May 03, 2014, 10:27:17 AM

is these the right adapter ?

http://www.ebay.de/itm/PCI-Express-Power-Adapter-8-pin-zu-6-pin-4-pin-12V-Y-Strom-Kabel-PCI-E-ATX-/261460372803?pt=DE_Elektronik_Computer_Computer_Graphikkarten&hash=item3ce040ad43

I dont think so, do you need an additional PCIE connector from the PSU to a mining module?

yes -> from this psu to the module
http://www.lepatek.de/fileadmin/produkte/netzteile/g-serie/datasheet_lepa-g1600_en.pdf

That PSU has already got 10 Pcie connectors, you only need 5 per miner, so you should be good.

Can you not buy another PSU to PCIE adapter to plug into one of the cpu things on the PSU, as they offer the same 30A?

Wolke

legendary

Activity: 966

Merit: 1000

Quote from: glen123 on May 03, 2014, 10:49:53 AM

@Wolke :

Did you think its lower the HW Error Rate if all Modules get 30 A ?

Greetz Glen

the problem is that i can't go higher than "turbo light" -> in each higher mode the psu shutdown after 30 - 60 minutes.... and in the extreme turbo mode the psu shutdown after 2 sec. Undecided

so i need an adapter... or an technical person how can tell me in details how to build...

Collider

hero member

Activity: 714

Merit: 500

4 30A rails are able to handle at least 4*30*12=1440W of power draw, so easily enough for one miner.

Under normal circumstances there is even more room for power draw as the PSU won´t immediatly shut off when 1440 on the 12V rails is reached.

glen123

legendary

Activity: 1028

Merit: 1000

@Wolke :

Did you think its lower the HW Error Rate if all Modules get 30 A ?

Greetz Glen

Wolke

legendary

Activity: 966

Merit: 1000

Quote from: Collider on May 03, 2014, 10:43:52 AM

Quote from: Wolke on May 03, 2014, 10:41:56 AM

Quote from: Collider on May 03, 2014, 10:39:49 AM

Quote from: Wolke on May 03, 2014, 10:27:17 AM

is these the right adapter ?

http://www.ebay.de/itm/PCI-Express-Power-Adapter-8-pin-zu-6-pin-4-pin-12V-Y-Strom-Kabel-PCI-E-ATX-/261460372803?pt=DE_Elektronik_Computer_Computer_Graphikkarten&hash=item3ce040ad43

I dont think so, do you need an additional PCIE connector from the PSU to a mining module?

yes -> from this psu to the module
http://www.lepatek.de/fileadmin/produkte/netzteile/g-serie/datasheet_lepa-g1600_en.pdf

That PSU has already got 10 Pcie connectors, you only need 5 per miner, so you should be good.

yes -> but the problem is that these 10 pcie conncectors are only on 4 "rails".... v3, v4, v5, v6

so i need an adapter from the 8pin cpu to 6 pin pci.... for the rail v2

Collider

hero member

Activity: 714

Merit: 500

Quote from: Wolke on May 03, 2014, 10:41:56 AM

Quote from: Collider on May 03, 2014, 10:39:49 AM

Quote from: Wolke on May 03, 2014, 10:27:17 AM

is these the right adapter ?

http://www.ebay.de/itm/PCI-Express-Power-Adapter-8-pin-zu-6-pin-4-pin-12V-Y-Strom-Kabel-PCI-E-ATX-/261460372803?pt=DE_Elektronik_Computer_Computer_Graphikkarten&hash=item3ce040ad43

I dont think so, do you need an additional PCIE connector from the PSU to a mining module?

yes -> from this psu to the module
http://www.lepatek.de/fileadmin/produkte/netzteile/g-serie/datasheet_lepa-g1600_en.pdf

That PSU has already got 10 Pcie connectors, you only need 5 per miner, so you should be good.

Wolke

legendary

Activity: 966

Merit: 1000

Quote from: Collider on May 03, 2014, 10:39:49 AM

Quote from: Wolke on May 03, 2014, 10:27:17 AM

is these the right adapter ?

http://www.ebay.de/itm/PCI-Express-Power-Adapter-8-pin-zu-6-pin-4-pin-12V-Y-Strom-Kabel-PCI-E-ATX-/261460372803?pt=DE_Elektronik_Computer_Computer_Graphikkarten&hash=item3ce040ad43

I dont think so, do you need an additional PCIE connector from the PSU to a mining module?

yes -> from this psu to the module
http://www.lepatek.de/fileadmin/produkte/netzteile/g-serie/datasheet_lepa-g1600_en.pdf

Collider

hero member

Activity: 714

Merit: 500

Quote from: Wolke on May 03, 2014, 10:27:17 AM

is these the right adapter ?

http://www.ebay.de/itm/PCI-Express-Power-Adapter-8-pin-zu-6-pin-4-pin-12V-Y-Strom-Kabel-PCI-E-ATX-/261460372803?pt=DE_Elektronik_Computer_Computer_Graphikkarten&hash=item3ce040ad43

I dont think so, do you need an additional PCIE connector from the PSU to a mining module?

Wolke

legendary

Activity: 966

Merit: 1000

is these the right adapter ?

http://www.ebay.de/itm/PCI-Express-Power-Adapter-8-pin-zu-6-pin-4-pin-12V-Y-Strom-Kabel-PCI-E-ATX-/261460372803?pt=DE_Elektronik_Computer_Computer_Graphikkarten&hash=item3ce040ad43

glen123

legendary

Activity: 1028

Merit: 1000

Thanks

atta2k15

sr. member

Activity: 315

Merit: 250

Quote from: glen123 on May 03, 2014, 08:38:32 AM

Hi

@atta2k15

got an SD Image to replace the Original Software ?

Can you describe an "howto" ?

Greetz Glen

working on that, first fine tuning
then make SD card image
make manual

glen123

legendary

Activity: 1028

Merit: 1000

Hi

@atta2k15

got an SD Image to replace the Original Software ?

Can you describe an "howto" ?

Greetz Glen

atta2k15

sr. member

Activity: 315

Merit: 250

Eureka, Desk running on debian!!! Shocked

Still some fine-tuning has to be done, but its running now on WIFI.

Front of desk showing the WIFI usb

inside screen: (Session in background)

and Bitmine control panel:

stevebrowne

full member

Activity: 128

Merit: 100

Excellent result swissmining.

Still awaiting my BTC refund however, which is due on Monday. Hopefully it will be paid so I don't have to follow your route, or the route I mentioned previously about penning an article for places like The Register and the Daily Mail. They love a bit of Bitcoin controversy.

spiccioli

legendary

Activity: 1379

Merit: 1003

nec sine labore

Quote from: swissmining on May 03, 2014, 06:54:32 AM

omg guys, just checked my bankaccount an guess what: I got refunded today in USD. Bitmine executed the order of payment yesterday. They also paid me the additional 10% (minus USD 40 for banking and whatever fees).

So it "only" took them 22 days after bitmine confirmed, that my refund request has been forwarded to their credit team.

It seems like they selectively refund people, depending on how much pressure you put on them. It took a lot of energy to do this. Thank you for nothing Giorgio. I'm just glad this nightmare has ended.

For me, there is no reason to action against them anymore. But im willing to provice you guys with necesary information regarding the swiss legal system.

Kind regards

swissmining

Glad for you, I'll contact you in the coming days if they don't refund my first unit (I've got a BTC refund) to start a legal action agains them.

Best regards.

spiccioli

swissmining

newbie

Activity: 34

Merit: 0

omg guys, just checked my bankaccount an guess what: I got refunded today in USD. Bitmine executed the order of payment yesterday. They also paid me the additional 10% (minus USD 40 for banking and whatever fees).

So it "only" took them 22 days after bitmine confirmed, that my refund request has been forwarded to their credit team.

It seems like they selectively refund people, depending on how much pressure you put on them. It took a lot of energy to do this. Thank you for nothing Giorgio. I'm just glad this nightmare has ended.

For me, there is no reason to action against them anymore. But im willing to provice you guys with necesary information regarding the swiss legal system.

Kind regards

swissmining

glen123

legendary

Activity: 1028

Merit: 1000

Got my 1Ths Unit working with new Firmware.

i choose different Settings ( Powersafe Ultra till Turbo max )
the Best Choice is :

Nominal Settings = 1020-1040 GHs to 1030 W out of the Wall.

Powersafe suxxs ! getting 800 GHs for 760 W !
Thats NOT what Bitmine/Specs said .

Its an Enermax built in PSU from Bitmine with 1300W (? )

If you going to TurboMode u can get max 1200 GHs but draws 1800-1900 W out of the Wall ;-(

I choose to leave it to nominal (normal ) Mode an get 1W/1Ghs
Then i reassign my Hex8A1 260 Unit with 226 Ghs to 280 Watts

Complet Rig = approx. 1300 Watt for 1250-1280 GHs
Overclock suxxs cause to much Power.

Thats all.

BTW : How can ich choose to switch Pools at the Minersettings, i can only Load Balance,Failover or Balance the Pools
I cant SWITCH Pools in the Settings or must set all to the same Pool or choose Failover and set the First Pool.

Does anybody use CGRemote for the CCD ?

Greetz Glen

sawsawsaw

newbie

Activity: 55

Merit: 0

I really thing it would be helpfull to do an extra thread for organising a lawsuit.

And maybe do the most via private message, not sure, if bitmine.ch can take an advantage of your information. Dont give them more news ans they gave you Wink

As I know you can force an bankruptcy while "taking" out the money. And if bitmine.ch know what going on in detail.....Im not saying bitmine will do it, but I only can repeat myself, from now on Im expecting any dirty move...

For me it really looks like its not worth putting any more money and effort in it. I close the case for my self. As I wrote they sent the miner out allready - too late (after 71 days - after I sent the refund form)- but they did. I lost money cause I allready sold that preorder, and I had to refund that guy a week ago (ebay 30 days preorder fullfillment rule) and with the machine will be no ROI and I cant even sell it for the price I paid...

Wish you all guys good luck! And Ill follow your action with interest!

Wolke

legendary

Activity: 966

Merit: 1000

Quote from: atta2k15 on May 02, 2014, 01:17:45 PM

which mode ?

Wolke

legendary

Activity: 966

Merit: 1000

is here somebody how got some btc, USD, Euro or something else like money from them back?

Topic: Official BITMINE CoinCraft series 28nm ASIC miners thread - page 79. (Read 565252 times)