Are there any recommended voltage settings for a macbook pro usb port? (Might be the same for any laptop)
I will only run one ML2
It might be cool to collect settings for common setups. ex:
- Macbook Pro
- Regular Windows laptop
- ..
Topic: Official FutureBit Moonlander 2 Driver and Support Thread - page 73. (Read 71717 times)
I'm a complete mining newbie.
Can anyone point me to instructions how to operate the moonlander silently?
Which settings etc...?
Or even without fan?
Hashrate is not so important for me, but it should be as silent as possible.
Thx in advance & sorry for the strange question.
Can anyone point me to instructions how to operate the moonlander silently?
Which settings etc...?
Or even without fan?
Hashrate is not so important for me, but it should be as silent as possible.
Thx in advance & sorry for the strange question.
I have two units to be shipped from asicpuppy. Anyone wants to buy it from me @ standard price?
interested, sent PM
HI Guys,
Just got my 4 ML, quick question, i'm doing about 3-3.8M at stock settings with 648mhz, i can't seem to go higher, when i do it alternates between the 4 with errors and restarting, has this got to do with my usb hub? or i need to tune the core voltage to higher? any advice guys?
Just got my 4 ML, quick question, i'm doing about 3-3.8M at stock settings with 648mhz, i can't seem to go higher, when i do it alternates between the 4 with errors and restarting, has this got to do with my usb hub? or i need to tune the core voltage to higher? any advice guys?
if it helps I got my 2 ML's the other day and had trouble getting them stable as well, but I found a seemingly sweet spot without touching pots. First thing I found is on the hub you are using, make sure you are using even or odd ports, don't mix them. for example if you have 3, put them on ports 1, 3, and 5
I'm using a plugable 7 port usb 3.0 hub and this strategy works well, but if I put 1 on port 1 and another on port 4 (puts space in between), I get either one of them not responding, or tons of hardware errors and rejects.
Next, play with the core clock... I found 1 of my sticks I could bring up to 832 with no errors, whereas the other I can't go higher than 756... and to those saying 796 worked great for them, the one that can go higher seems to work great at 796 but the other stick blows chunks at that speed... I simply tried several and settled on 756 for both and my HW errors are less than 1%, with 8.5 - 11 Mh/s combined... not too shabby.
HI Guys,
Just got my 4 ML, quick question, i'm doing about 3-3.8M at stock settings with 648mhz, i can't seem to go higher, when i do it alternates between the 4 with errors and restarting, has this got to do with my usb hub? or i need to tune the core voltage to higher? any advice guys?
Just got my 4 ML, quick question, i'm doing about 3-3.8M at stock settings with 648mhz, i can't seem to go higher, when i do it alternates between the 4 with errors and restarting, has this got to do with my usb hub? or i need to tune the core voltage to higher? any advice guys?
I have two units to be shipped from asicpuppy. Anyone wants to buy it from me @ standard price?
Really nice stick other then the stock fan.
I have 2 more coming will run four once they arrive.
I have scythe ultra kaze 120mm fans they move 133 cfm.
I feed them nine volts they move around 100cfm.
With no fans set on the sticks they fit easier on the hub.
Very happy with them
I have 2 more coming will run four once they arrive.
I have scythe ultra kaze 120mm fans they move 133 cfm.
I feed them nine volts they move around 100cfm.
With no fans set on the sticks they fit easier on the hub.
Very happy with them
Has / can anyone here share some accurate readings of current draw (with stock voltage settings) of these moonlanders.
I have a pluggable 7 port USB 3.0 hub, this one:
https://plugable.com/products/usb3-hub7bc
It has a 60W power supply.
I have 5x moonlanders connected to it running at 756 clock speed and it has a reading (at the main socket for the hub alone) of 53.08W which seems wayyy to high.
I have a pluggable 7 port USB 3.0 hub, this one:
https://plugable.com/products/usb3-hub7bc
It has a 60W power supply.
I have 5x moonlanders connected to it running at 756 clock speed and it has a reading (at the main socket for the hub alone) of 53.08W which seems wayyy to high.
30W at the wall here for 2 sticks at 954mhz on an Anker hub. Core voltage turned up of course.
These have been working great for me on litecoinpool.org, mine have been going for over a week now without any issues. I was thinking about trying out prohashing.com, anyone mining there with these? What do I need to enter in the start_moonlander2 file for prohashing (I have three sticks if that matters re: difficulty)? Thanks as always 
Would just changing:
stratum+tcp://us.litecoinpool.org:3333
to
stratum+tcp://prohashing.com:3333.
work?
Yes...you just need to update pool URL and login credentials (if they are different).
Thanks. Seems to be working well on there too.
These have been working great for me on litecoinpool.org, mine have been going for over a week now without any issues. I was thinking about trying out prohashing.com, anyone mining there with these? What do I need to enter in the start_moonlander2 file for prohashing (I have three sticks if that matters re: difficulty)? Thanks as always
Would just changing:
stratum+tcp://us.litecoinpool.org:3333
to
stratum+tcp://prohashing.com:3333.
work?
Yes...you just need to update pool URL and login credentials (if they are different).
Litecoinpool totally blocked me a long time ago for no reason at all
I've moved on.
There are better pools and better coins.
F*** that pool.
I've moved on.
There are better pools and better coins.
F*** that pool.
These have been working great for me on litecoinpool.org, mine have been going for over a week now without any issues. I was thinking about trying out prohashing.com, anyone mining there with these? What do I need to enter in the start_moonlander2 file for prohashing (I have three sticks if that matters re: difficulty)? Thanks as always
Would just changing:
stratum+tcp://us.litecoinpool.org:3333
to
stratum+tcp://prohashing.com:3333.
work?
I just replaced the stock fans with the digikey ball bearing ones. They do run a little bit more quiet and don't get the loud speed up and ratting anymore.
In case anyone is interested, I used this crimp set:
https://www.amazon.com/gp/product/B01MCZE2HM/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
and these crimpers:
https://www.amazon.com/gp/product/B071X8PG4B/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
In case anyone is interested, I used this crimp set:
https://www.amazon.com/gp/product/B01MCZE2HM/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
and these crimpers:
https://www.amazon.com/gp/product/B071X8PG4B/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Thanks for this information, I found someone selling some ball bearing fans similar to the digikey ones on amazon for about $6 a piece so I ordered a bunch. I may have to change the pins/connectors on them and will use this info to do that if I need to. If they work out I'll post up for everyone.
I just replaced the stock fans with the digikey ball bearing ones. They do run a little bit more quiet and don't get the loud speed up and ratting anymore.
In case anyone is interested, I used this crimp set:
https://www.amazon.com/gp/product/B01MCZE2HM/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
and these crimpers:
https://www.amazon.com/gp/product/B071X8PG4B/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
In case anyone is interested, I used this crimp set:
https://www.amazon.com/gp/product/B01MCZE2HM/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
and these crimpers:
https://www.amazon.com/gp/product/B071X8PG4B/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
If I find a litecoin block or a doge block? I'm really only interested in litecoin blocks. Is this wrong? It's running stable finally.
Hi Hintsal, I read your exchange with TimBuck2 and tried ltc.tbdice.org myself. Here's what worked well for me with an explanation of the user/pass options for other old/newbies like me:Code:
bfgminer --scrypt -o stratum+tcp://tbdice.org:13333 -u LSC2EKdyaG9q6vZDkYEfvrDwPNUA8r2Nbe.one -p diff_256:D5TwawJr4bdwaCyfMzGjn1XVKZCqeSnwpb:[email protected]:type=3 -S MLD:all --set MLD:clock=600
-u LSC2EKdyaG9q6vZDkYEfvrDwPNUA8r2Nbe.one
-u my_litecoin_address.worker
Your LTC address is your username and the worker name is set by me here in the script and can be anything. I can then search for it on ltc.tbdice.org under MINERS -> WORKERS and see my stats.
-p diff_256:D5TwawJr4bdwaCyfMzGjn1XVKZCqeSnwpb:[email protected]:type=3
-p difficulty_setting:my_dogecoin_address:[email protected]:mail_notification_type=3
ltc.tbdice.org's diff setting is 128 by default, and the Moonlander should be set with a var diff of 512 or lower according to jstefanop's instructions; I was unable to connect to the pool properly without setting the diff.
The pool will mine LTC & DOGE - if you neglect to specify a wallet any DOGE you mine will be donated to the pool; you might as well collect it and exchange it for LTC like Xantor1234 wrote. You can get a quick DOGE web wallet here: https://my.dogechain.info/
From the pool's instructions: "The type=Y can be one (or sum) of flowing: 1 receive notification for all DOGE blocks found by your worker, 2 receive notification for all LTC blocks found by your worker, 16 receive notification for worker disconnect events and 32 receive notification for worker authorize events. For instance: type=1 you will be notified for new DOGE blocks only, type=3 (1+2) you will be notified for both DOGE + LTC blocks"
And unlike TimBuck2 I left my clock set at 600 - I just got my Moonlander and I'm still exploring the stock capability. Hope this helps!
edit: it hashes solidly for me with the clock set to 796 too
Just get a dogecoin address and add : to the password. Everything will work just the same and you can always use shapeshift or similar to exchange your doggies to LTC if you happen to find some.
Wanted to see if anyone has a script that works with this pool in the moonlander bfgminer.
Code:
bfgminer --scrypt -o stratum+tcp://tbdice.org:13333 -u LTC_Payment_Address.User_Name_I_Select -p diff_256:Doge_Address:[email protected]:type=3 -S MLD:all --set MLD:clock=796
The email address is only added for notifications if I hit a block.
Has worked for me non stop for days at a time...
Hi. This is what I just added
Code:
bfgminer --scrypt -o stratum+tcp://tbdice.org:13333 -u LfGnzpk9BKdrfBAroQZ55LrUyN1V4HqqU8.0 -p diff_256 -S MLD:all --set MLD:clock=796
it is running. Do you see any issues with this scrypt?
you didnt include a doge address so you are missing out if you find a block.
Wanted to see if anyone has a script that works with this pool in the moonlander bfgminer.
Code:
bfgminer --scrypt -o stratum+tcp://tbdice.org:13333 -u LTC_Payment_Address.User_Name_I_Select -p diff_256:Doge_Address:[email protected]:type=3 -S MLD:all --set MLD:clock=796
The email address is only added for notifications if I hit a block.
Has worked for me non stop for days at a time...
Hi. This is what I just added
Code:
bfgminer --scrypt -o stratum+tcp://tbdice.org:13333 -u LfGnzpk9BKdrfBAroQZ55LrUyN1V4HqqU8.0 -p diff_256 -S MLD:all --set MLD:clock=796
it is running. Do you see any issues with this scrypt?
you didnt include a doge address so you are missing out if you find a block.
Wanted to see if anyone has a script that works with this pool in the moonlander bfgminer.
Code:
bfgminer --scrypt -o stratum+tcp://tbdice.org:13333 -u LTC_Payment_Address.User_Name_I_Select -p diff_256:Doge_Address:[email protected]:type=3 -S MLD:all --set MLD:clock=796
The email address is only added for notifications if I hit a block.
Has worked for me non stop for days at a time...
Hi. This is what I just added
Code:
bfgminer --scrypt -o stratum+tcp://tbdice.org:13333 -u LfGnzpk9BKdrfBAroQZ55LrUyN1V4HqqU8.0 -p diff_256 -S MLD:all --set MLD:clock=796
it is running. Do you see any issues with this scrypt?
These have been working great for me on litecoinpool.org, mine have been going for over a week now without any issues. I was thinking about trying out prohashing.com, anyone mining there with these? What do I need to enter in the start_moonlander2 file for prohashing (I have three sticks if that matters re: difficulty)? Thanks as always
Jump to: