Topic: Official FutureBit Moonlander 2 Driver and Support Thread - page 84. (Read 71661 times)

Received my order, pretty pumped. Downloaded all updated drivers for Mac. Open up to start the error messages are lazy symbol binding failed, Symbol not found: _clock_gettime. Any help would be appreciated.

my stratum mining pool shows a strange error message when the bgfminer tries to connect. MPOS does not show the miner as hashing either (but as connected)...

Thank you very much, it worked. regards

I work, thank you very much is what you are looking for. a thousand thanks again

You should add the #skipcbcheck to the parameter to the pool:

o stratum+tcp://178.238.235.246:3032#skipcbcheck

Tried running a few miners on another raspberry pi running raspian stretch, but I ran into an issue.  lsusb shows the driver loaded is cygnal and not silabs.  Is there a quick kernel patch that can be applied or do we have to compile the drivers from silabs and insert them?

Try making it stratum+tcp://178.238.235.246:3032/#xnsub#skipcbcheck

Hi,

hello, I'm mining a scrypt currency other than litecoin and it throws me the following details (Red letters). They are fine?


my configuration is

bfgminer.exe --scrypt -o stratum+tcp://178.238.235.246:3032 -u MKWbNv911VHa1Tmzo8FkW1vmrBDSLBcWTQ -p x,d=128  -S MLD:all --set MLD:clock=600
pause



bfgminer version 5.4.2-38-g106390a99 - Started: [2017-12-17 00:42:02] - [  0 days 00:12:34]
 [M]anage devices [P]ool management Settings [D]isplay options                                          [H]elp [Q]uit
(all pools are dead)
 ST:3  F:0  NB:23  AS:0  BW:[ 36/ 38 B/s]  E:0.02  BS:5
 1            |  3.30/ 3.37/ 3.46Mh/s | A:212 R:5+0(.44%) HW:1/.08%
------------------------------------------------------------------------------------------------------------------------ MLD 0:       |  3.39/ 3.38/ 3.44Mh/s | A:212 R:5+0(.44%) HW:1/.08%
------------------------------------------------------------------------------------------------------------------------ [2017-12-17 00:52:07] Accepted 0029d9f1 MLD 0  Diff 23m/7m
 [2017-12-17 00:52:10] Accepted 007ae6fa MLD 0  Diff 8m/7m
 [2017-12-17 00:52:13] Coinbase check: multiple inputs in coinbase: 0xee
 [2017-12-17 00:52:13] Network difficulty changed to 1 (11.45Mh)
 [2017-12-17 00:52:13] Stratum from pool 0 detected new block
 [2017-12-17 00:52:28] Accepted 007e853b MLD 0  Diff 7m/7m
 [2017-12-17 00:52:37] Accepted 001e96e6 MLD 0  Diff 32m/7m
 [2017-12-17 00:52:43] Accepted 001f2503 MLD 0  Diff 32m/7m
 [2017-12-17 00:53:00] Accepted 004b010e MLD 0  Diff 13m/7m
 [2017-12-17 00:53:07] Accepted 003cbc8d MLD 0  Diff 16m/7m
 [2017-12-17 00:53:08] Coinbase check: multiple inputs in coinbase: 0x25
 [2017-12-17 00:53:12] Accepted 00028152 MLD 0  Diff 399m/7m
 [2017-12-17 00:53:21] Accepted 00278102 MLD 0  Diff 25m/7m
 [2017-12-17 00:53:27] Accepted 002d7b85 MLD 0  Diff 21m/7m
 [2017-12-17 00:53:40] Accepted 0062f0ee MLD 0  Diff 10m/7m
 [2017-12-17 00:54:03] Accepted 001aa539 MLD 0  Diff 37m/7m
 [2017-12-17 00:54:03] Coinbase check: multiple inputs in coinbase: 0x5c
 [2017-12-17 00:54:12] Accepted 003b4c74 MLD 0  Diff 16m/7m
 [2017-12-17 00:54:14] Accepted 002c08b9 MLD 0  Diff 22m/7m
[2017-12-17 00:54:31] Coinbase check: multiple inputs in coinbase: 0x78
 [2017-12-17 00:54:31] Network difficulty changed to 1 (10.05Mh)
 [2017-12-17 00:54:31] Stratum from pool 0 detected new block

https://bitcointalk.org/index.php?board=75.0 is the spot to sell miners

Can someone please let me know why my posts offering to resell my Moonlanders keeps getting deleted or point to the right place where I can offer them for sale?

Tell your friend I said scrypt only.

Yea this should help you guys if you want to push voltages (though I recommend pushing them down for power savings rather than the other way around). As long as they are not so unstable that they restart every few mins, the update restarts them within 10 seconds so hashrate loss is negligible even if they restart 1-2 times an hour.

If you had to restart them every other hour, maybe your mem-voltage it too low?! And/or the powerdraw is a bit too high for USB port that you are using? Every other hour is NOT normal! See also page 1. But agree, that software update is doing wonders!!

Oh God.  Thank you for the updated software.  I hated having to restart the little buggers ever other hour.

Is there a 32bit Linux version of the driver?

Had intended reusing an old eeePC (1000H) as a no-budget, low energy alternative to an Rpi.

Have been getting an "cannot execute binary file: exec format error"

Upon further research:
Running Ubuntu 16.04.3 LTS (lubuntu)
Arch: i686
File: ./bfgminer: ELF 64-bit LSB executable, x86-64,

Great job on the updated drivers.  My Moonlanders have been working much better without the random stops.   

I sent mine back, wouldn't even run 2 of them at high frequencies, I am not the only one who has been displeased with it. The Anker  BTW is the same price as the Plugable from Amazon, have been able to run 2 with zero issues even at 954mhz. Tomorrow I will have 4 more sticks to test with it.

The Plugable 60W hub is less than half the price and works great with these sticks.

Note taken, thanks.
I will update with better recommendation

Edit: replaced for Anker 60W USB3 Hub

I'd just say that your hub there that you say supports 4 sticks, didn't even support 2 at decent speeds for me. Wouldn't recommend.