Okay thanks, I figured it was but I was thrown off by the whole
thing. Thanks!
Your welcome. Glad I could help. Quote
See the P2Pool thread for more information on how to set up a miner.
thing. Thanks!
Topic: [OFFLINE]P2Pmining.com-Hybrid P2Pool-NO FEE!!!-BTC/NMC/IXC/I0C/DEV/LTC - page 27. (Read 56628 times)
April 29, 2012, 08:39:24 AM
April 28, 2012, 09:54:41 PM
i noticed you said you are using 2 AND 3 difficulty shares, does that imply that i can set it so i can accept multiple difficulties of shares?
currently running at 4 difficulty and getting promising results, faster acceptance rate compared compared to 1 difficulty shares
EDIT: exact performance boost... .93 shares/m vs when i was at 1 diffcult was getting .62 /m ( 2 hours average)
currently running at 4 difficulty and getting promising results, faster acceptance rate compared compared to 1 difficulty shares
EDIT: exact performance boost... .93 shares/m vs when i was at 1 diffcult was getting .62 /m ( 2 hours average)
Some of my mining rigs are set for difficulty 3 shares and some are difficulty 2 shares. You can have multiple rigs mining to the same bitcoin address with different difficulty shares.
April 28, 2012, 08:37:38 PM
Okay thanks, I figured it was but I was thrown off by the whole
thing. Thanks!
Quote
See the P2Pool thread for more information on how to set up a miner.
thing. Thanks!
April 28, 2012, 08:11:13 PM
This is extremely n00bish.. but I'm confused. Do I just point my miner like the website says..
Or do I need to download the p2p stuff and go through that stuff?
Yes, just like the website says and NO you don't need to download p2p stuff to use JayCoins p2pool.Quote
It is very easy to start mining at P2Pmining. Just point your miner at: http://p2pmining.com:9332 and use your Bitcoin address as your username. Use anything for your password.
Or do I need to download the p2p stuff and go through that stuff?
To use p2pmining.com, follow your miners instructions for connecting to a pool.
For example, to connect using CGMiner:
Code:
cgminer -o http://p2pmining.com:9332 -u username -p password
April 28, 2012, 07:52:11 PM
This is extremely n00bish.. but I'm confused. Do I just point my miner like the website says..
Or do I need to download the p2p stuff and go through that stuff?
Quote
It is very easy to start mining at P2Pmining. Just point your miner at: http://p2pmining.com:9332 and use your Bitcoin address as your username. Use anything for your password.
Or do I need to download the p2p stuff and go through that stuff?
April 28, 2012, 07:26:23 PM
Note: Gigabyte motherboards that end with UD3 or UD3H don't seem to be able to boot Bamt.
For Gigabyte MB USB Boot issues try:
https://bitcointalksearch.org/topic/m.863345
April 28, 2012, 02:40:42 PM
i noticed you said you are using 2 AND 3 difficulty shares, does that imply that i can set it so i can accept multiple difficulties of shares?
currently running at 4 difficulty and getting promising results, faster acceptance rate compared compared to 1 difficulty shares
EDIT: exact performance boost... .93 shares/m vs when i was at 1 diffcult was getting .62 /m ( 2 hours average)
currently running at 4 difficulty and getting promising results, faster acceptance rate compared compared to 1 difficulty shares
EDIT: exact performance boost... .93 shares/m vs when i was at 1 diffcult was getting .62 /m ( 2 hours average)
April 28, 2012, 11:44:00 AM
Started using BAMT yesterday. It works great on p2pmining.com I am getting less stale/DOA and higher hashrate on all my cards. I should of upgraded from linuxcoin a long time ago.
All I changed was the overclocking settings and Pool address and username. I have been using 2 and 3 difficulty shares.
Note: Gigabyte motherboards that end with UD3 or UD3H don't seem to be able to boot Bamt.
All I changed was the overclocking settings and Pool address and username. I have been using 2 and 3 difficulty shares.
Note: Gigabyte motherboards that end with UD3 or UD3H don't seem to be able to boot Bamt.
April 28, 2012, 01:23:37 AM
switched over to CG miner and im getting terrible MH/s Rates.. like 100Mh vs the 250~ i was getting with the same clocks and stuff on just GUI miner.. my setting look like this
CGminer 2.3.3
CGminer 2.3.3
Looks like it's working now on the current miners http://p2pmining.com/?method=pool#ui-tabs-4
How did you fix it?
was running GUI miner at that time to not waste time
and i have a 7850
managed to push it to 200 Mhash/s
Code:
}
],
"intensity" : "5",
"vectors" : "3",
"worksize" : "256",
"kernel" : "poclbm", \\borrowed from GUI miner
"temp-cutoff" : "95",
"temp-overheat" : "85",
"temp-target" : "75",
"api-port" : "4028",
"expiry" : "120",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"gpu-threads" : "1",
"log" : "5",
"queue" : "2",
"retry-pause" : "5",
"scan-time" : "60",
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin"
}
if anyone can comment on this new set i would greatly appreciate it.. seeing as im still missing around 50 Mhash/s but the vector seems to like staying at 2-3 as any time i take it up to 4-6 my hash rate drops tremendously
April 27, 2012, 09:53:01 PM
switched over to CG miner and im getting terrible MH/s Rates.. like 100Mh vs the 250~ i was getting with the same clocks and stuff on just GUI miner.. my setting look like this
CGminer 2.3.3
CGminer 2.3.3
Looks like it's working now on the current miners http://p2pmining.com/?method=pool#ui-tabs-4
How did you fix it?
was running GUI miner at that time to not waste time
and i have a 7850
managed to push it to 200 Mhash/s
Code:
}
],
"intensity" : "5",
"vectors" : "3",
"worksize" : "256",
"kernel" : "poclbm", \\borrowed from GUI miner
"temp-cutoff" : "95",
"temp-overheat" : "85",
"temp-target" : "75",
"api-port" : "4028",
"expiry" : "120",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"gpu-threads" : "1",
"log" : "5",
"queue" : "2",
"retry-pause" : "5",
"scan-time" : "60",
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin"
}
if anyone can comment on this new set i would greatly appreciate it.. seeing as im still missing around 50 Mhash/s but the vector seems to like staying at 2-3 as any time i take it up to 4-6 my hash rate drops tremendously
April 27, 2012, 09:18:28 PM
switched over to CG miner and im getting terrible MH/s Rates.. like 100Mh vs the 250~ i was getting with the same clocks and stuff on just GUI miner.. my setting look like this
CGminer 2.3.3
...
edit : changed a few things... managed to get to 140 MH/s still rather low let me know what im doin wrong
CGminer 2.3.3
...
edit : changed a few things... managed to get to 140 MH/s still rather low let me know what im doin wrong
Lots of questionable values here:
"intensity" : "d", <- only use dynamic if you need to for system responsiveness
"vectors" : "2", <- make sure vectors & work are optimal for your card
"worksize" : "128",
"kernel" : "poclbm 128621", <- what card do you have? phatk2 is likely superior for 5000/6000 series cards
"gpu-engine" : "0-0", <- this will undo any overclocking you have set. either remove this line or remove any 3rd party overclocking and set clocks here
"gpu-fan" : "0-85",
"gpu-powertune" : "0",
"gpu-vddc" : "0.000",
April 27, 2012, 09:12:24 PM
switched over to CG miner and im getting terrible MH/s Rates.. like 100Mh vs the 250~ i was getting with the same clocks and stuff on just GUI miner.. my setting look like this
CGminer 2.3.3
CGminer 2.3.3
Looks like it's working now on the current miners http://p2pmining.com/?method=pool#ui-tabs-4
How did you fix it?
April 27, 2012, 07:46:23 PM
switched over to CG miner and im getting terrible MH/s Rates.. like 100Mh vs the 250~ i was getting with the same clocks and stuff on just GUI miner.. my setting look like this
CGminer 2.3.3
Shortcut image with properties of "C:\Users\localuser\Desktop\Bitcoin\MinGW\msys\1.0\home\local user\CG miner\cgminer.exe" -o http://p2pmining.com:9332 -u 1HHsNGs7xeMQSae2tc9VDF3qvGmskT8ofe -p (Passwordhere) -g 1 -I 8
{
"pools" : [
{
"url" : "http://p2pmining.com:9332",
"user" : "1HHsNGs7xeMQSae2tc9VDF3qvGmskT8ofe",
"pass" : "mypassword"
}
],
}
],
"intensity" : "d",
"vectors" : "2",
"worksize" : "128",
"kernel" : "poclbm 128621",
"gpu-engine" : "0-0",
"gpu-fan" : "0-85",
"gpu-memclock" : "0",
"gpu-memdiff" : "0",
"gpu-powertune" : "0",
"gpu-vddc" : "0.000",
"temp-cutoff" : "95",
"temp-overheat" : "85",
"temp-target" : "75",
"api-port" : "4028",
"expiry" : "120",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"gpu-threads" : "1",
"log" : "5",
"queue" : "1",
"retry-pause" : "5",
"scan-time" : "60",
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin"
}
does it look alright? cause it doesnt feel right especilly only pulling 100MHs
edit : changed a few things... managed to get to 140 MH/s still rather low let me know what im doin wrong
CGminer 2.3.3
Shortcut image with properties of "C:\Users\localuser\Desktop\Bitcoin\MinGW\msys\1.0\home\local user\CG miner\cgminer.exe" -o http://p2pmining.com:9332 -u 1HHsNGs7xeMQSae2tc9VDF3qvGmskT8ofe -p (Passwordhere) -g 1 -I 8
{
"pools" : [
{
"url" : "http://p2pmining.com:9332",
"user" : "1HHsNGs7xeMQSae2tc9VDF3qvGmskT8ofe",
"pass" : "mypassword"
}
],
}
],
"intensity" : "d",
"vectors" : "2",
"worksize" : "128",
"kernel" : "poclbm 128621",
"gpu-engine" : "0-0",
"gpu-fan" : "0-85",
"gpu-memclock" : "0",
"gpu-memdiff" : "0",
"gpu-powertune" : "0",
"gpu-vddc" : "0.000",
"temp-cutoff" : "95",
"temp-overheat" : "85",
"temp-target" : "75",
"api-port" : "4028",
"expiry" : "120",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"gpu-threads" : "1",
"log" : "5",
"queue" : "1",
"retry-pause" : "5",
"scan-time" : "60",
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin"
}
does it look alright? cause it doesnt feel right especilly only pulling 100MHs
edit : changed a few things... managed to get to 140 MH/s still rather low let me know what im doin wrong
April 27, 2012, 06:19:04 PM
ack, I'm at 20% stales... I'm trying intensity of 4 to see if they go down but I'm only mining at 85% of capacity with such a low intensity..... is it possible to mine one thread on one pool at a certain intensity and another thread on another pool at a different intensity (in cgminer) ?
Didn't work... what's going on? What am I doing wrong?
There can be multiple reasons. Is your network to congested for Longpolling to keep up? Is your cgminer updated? Did you try mining with only one thread (-g 1)? What is your hashrate?
April 27, 2012, 05:03:27 PM
ack, I'm at 20% stales... I'm trying intensity of 4 to see if they go down but I'm only mining at 85% of capacity with such a low intensity..... is it possible to mine one thread on one pool at a certain intensity and another thread on another pool at a different intensity (in cgminer) ?
Didn't work... what's going on? What am I doing wrong?
April 27, 2012, 04:10:39 PM
ack, I'm at 20% stales... I'm trying intensity of 4 to see if they go down but I'm only mining at 85% of capacity with such a low intensity..... is it possible to mine one thread on one pool at a certain intensity and another thread on another pool at a different intensity (in cgminer) ?
April 27, 2012, 10:29:01 AM
Any chance we can change the DOA stat or have a page with 24hr stats instead of 1hr? Because I want to keep track of stale rates vs changes I do on my settings, and I think 1 hr is too short of a time frame.
http://p2pmining.com:9332/static/graphs.html 
April 27, 2012, 09:51:49 AM
Good morning everyone,
Just a couple of suggestions I've thought of.
Any chance we can change the DOA stat or have a page with 24hr stats instead of 1hr? Because I want to keep track of stale rates vs changes I do on my settings, and I think 1 hr is too short of a time frame.
Also can you add to the faq in the future the pools main address 18cfVDzcLQ91Xe4yGEs8uJFtHZUiZhmdks so people can verify the amount going in and out of the pool, for the people that don't know how to find that out.
Lets get rid of this bad luck we all been having and have a great day!
Just a couple of suggestions I've thought of.
Any chance we can change the DOA stat or have a page with 24hr stats instead of 1hr? Because I want to keep track of stale rates vs changes I do on my settings, and I think 1 hr is too short of a time frame.
Also can you add to the faq in the future the pools main address 18cfVDzcLQ91Xe4yGEs8uJFtHZUiZhmdks so people can verify the amount going in and out of the pool, for the people that don't know how to find that out.
Lets get rid of this bad luck we all been having and have a great day!
April 26, 2012, 09:41:46 PM
I felt bad that you lost out because of my screw up.
I took some of my last payout from the last block and transferred it to your address http://p2pmining.com/?method=miner&data=1JkxLX3FC8dovhcSSAEVyb6Z7786PPqvXK#ui-tabs-1
I took some of my last payout from the last block and transferred it to your address http://p2pmining.com/?method=miner&data=1JkxLX3FC8dovhcSSAEVyb6Z7786PPqvXK#ui-tabs-1
Yeah the same thing happened to me from mining all day today, but I restarted my miner around 9PM EST, it seems to be fixed now, my i0coin shares are starting to actually be worth a reward. I only have 250Mh/s so its no big deal though.
April 26, 2012, 08:01:01 PM
oh thanks buddy 
,I really like your pool and hope to stay for a long time. Hoping to add another 200mh/s in the next hour.
Also whats up with 16hu2aQAqzR7Q6UANCNeBG1Fr2GRydGrZz is he a pool hopper 57.8% stale?
,I really like your pool and hope to stay for a long time. Hoping to add another 200mh/s in the next hour.Also whats up with 16hu2aQAqzR7Q6UANCNeBG1Fr2GRydGrZz is he a pool hopper 57.8% stale?
Jump to: